bing tracking image
  1. Camper Jacks
  2. etrailer
  3. Pop Up Camper
  4. Teardrop Camper
  5. Travel Trailer
  6. A-Frame Jack
  7. Leveling Jacks
  8. Tongue Jack
Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black

Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black

Item # EJ-3520-BBX
Our Price: $169.37
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 24 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full camper jacks installation instructions. Great price Kodiak Cub Travel Trailer camper jacks and expert service. Dutchmen Kodiak Cub Travel Trailer, 2022 camper jacks by etrailer are available from etrailer.com. For expert service call 1-800-940-8924 to order your Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black part number EJ-3520-BBX, or order online at etrailer.com.
  • All Info
  • Reviews (1746)
  • Q & A (0)
  • Photos

etrailer Camper Jacks - EJ-3520-BBX

  • Pop Up Camper
  • Teardrop Camper
  • Travel Trailer
  • A-Frame Jack
  • Leveling Jacks
  • Tongue Jack
  • Electric Jack
  • 1 Jack
  • 18 Inch Lift
  • etrailer
  • Bolt-On

Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 27-1/2", and 18" of screw travel. Drop leg offers an extra 5-5/8" of lift. Includes a manual override handle.


Features:

  • Electric jack lets you raise and lower your A-frame trailer
  • Drop leg allows for increased lift and saves time when raising or lowering
    • Pin and clip holds leg at desired location
  • 2 Toggle switches on the front of the housing let you operate the jack
    • On/off switch controls light
    • Extend/retract switch controls up and down movement
  • LED light illuminates at a downward angle to help you focus on your coupler
  • Emergency crank (included) allows you to manually operate jack if needed
    • Requires a 3/8" socket to use the manual crank
  • Black powder coated outer tube
  • Zinc-finished inner tube and footplate resist corrosion
  • Simple, bolt-on installation
    • Wires to 12-volt power source
      • 12-Gauge wires
    • Serrated washer included for ground connection


Specs:

  • Bracket height:
    • Retracted: 9-1/2"
    • Extended:
      • 27-1/2" Without drop leg
      • 35" With drop leg
    • Total lift: 25-1/8"
      • Screw travel: 18"
      • Drop leg travel: 5-5/8"
    • Clearance:
      • 20-1/2" From bottom of bracket to top of jack
    • Outer tube diameter: 2-1/4"
    • Inner tube diameter: 2"
    • Hole spacing on drop leg: 1-7/8"
    • Footplate diameter: 5-1/2"
    • Lift capacity: 3,500 lbs
    • 1-Year warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



EJ-3520-BBX Ram Powered Jack w/ Footplate - Drop Leg - A-Frame - 18" Screw Travel - 3,500 lbs - Black



Customer Satisfaction Score:


Customer Reviews

Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black - EJ-3520-BBX

Average Customer Rating:  4.7 out of 5 stars   (1746 Customer Reviews)

Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 27-1/2", and 18" of screw travel. Drop leg offers an extra 5-5/8" of lift. Includes a manual override handle.

by: 10/17/2023

Great product and Trailer has great customer service. It's to bad that the shipping companies do not take better care with the items during shipping! will receive replacement parts to fix what was broken, but it causes lots of extra work for the customer. will have to take complete jack off to replace the broken motor cover because of shipping carelessness!!

regards,

Dan Ewert

Daniel C.

2/6/2024

Trailer has Great Customer service! The power trailer jack is really nice for quick change of the trailer.



by:

This little rig has teeth! Much faster than i expected. About a 30 minute installation from old lift removal to new and wiring. Super simple. Great addition to my hangar 18!

Jim

8/30/2023

Still going strong. I like this little guy a lot!



by:

Install was easy enough. Getting through the second hole at the bottom of the A frame was a bit of a challenge (paint/powder coat made it a very tight fit. A little filing around the edges of the hole and the jack tube resolves that. Drop leg is a very nice feature! Jack moves a little slower than I had anticipated (thus the 4 stars). Overall, I’m pleased with it and it definitely made hooking up to the load leveling hitch MUCH easier.

Leland

1/17/2024

Jack is still performing well and meeting expectations. Still wish it moved a little quicker but, aside from that there are no concerns with quality and reliability.



by:

This was purchased for my 24 foot enclosed car hauler. Overall I think this is a decent purchase, priced under $120.

The fuse should come from the factory with dielectric grease packed in the little holder as it is located outside of the housing and it's in a pretty rough environment. The power lead length is plenty long for connecting to either a battery mounted on the tongue or service box that all of your trailer wires go into- This is where I wired mine into. I actually used a grommet to plug the hole that the manufacturer ran the power wire through and drilled another hole on the other side so the wire would run straight down the correct side of the jack and into the service box.

One of the screws that mounts the black housing on to the metal frame was pulled through by the time it arrived, so I am used washers when I reinstalled them to help prevent this from happening again.

Other notes:
I will need to get a longer hitch now, as my tailgate will hit the jack housing, and I did purchase a cover for the jack from the recommended bar at the bottom when I purchased this jack.

Final:
I've only cycled it up and down twice but it worked nicely and quietly so overall I am very pleased with my purchase

Jimmy

3/23/2021

Still working well, over a year later. From -30f to 90f and I havent had an issue, except for the light lense got busted. I keep a cover over it which I believe 100 makes a world of difference.

Etrailer Expert

Jon G.

3/25/2021

If your light lens is still busted you can get it replaced with the Replacement Cover # EJ-3520-BCV.


by:

My Jack arrived DOA. After installing it on my trailer, the Jack didn’t work. The manual crank handle came in handy because I didn’t have time to troubleshoot and repair it at the time. It was just a wire that was no longer connected to the switch but I have to tell you it was extremely disappointing to receive a brand new item that didn’t work. If it had worked out of the box, I’d give it a five star review. You should consider soldering and heat shrinking the wires to the switches or making the wires longer so they aren’t banjo string tight and putting the lug at a strange angle.



by:

I hope that third time is a charm. The first one I got several years ago, had a short circuit causing the battery in the camper to explode and also damaged some wiring. The next on was one that could be plugged into the 7 prong trailer plug on the towing vehicle. The motor would not raise or lower the trailer, intermittatly. Will be installing #3 shortly (connects directly to the battery), and I hope it lasts more that a couple years. Suggest that fuse to the lift be placed on the HOT side, not the Ground side.



by:

Jack is fine, mechanically and electrically. But the plastic lens over the LED lamp would not fit properly, no matter what I did. So I had to use silicone caulk to seal it up.

David

8/27/2022

We actually sold that trailer, so I have no idea.



by:

I will give 10 stars to etrailer and its employees. My 1st replacement jack didn't make out so well after a trip on the Long Island Expressway. I contacted the company, and a replacement was on the way in short order. Thank you!
The product itself does seem above average and appears great for the price point. Very easy install. I suggest taking your time with the electrical connection and hooking right up to the point of contact instead of a splice if you can, there's plenty of wire. I now cover the unit with a plastic bag, as my original lasted only 5 years and the insides were all waterlogged and rusted when it failed.



by:

Works very well on our Lance 1475. My reason for giving it less than 5 stars is the wiring provided for the positive lead. It’s too short to run it properly secured between the jack and the battery box, the manufacturer should add another 12” or so. I had to splice more wire in to make the connection and be able to secure the wire along the trailer frame. Also, a little heavier gauge wire would be a good idea for the amps this unit is pulling. Other than that, the form, fit and function are perfect.

Spencer

10/9/2023

Still working perfectly after a year of use, and perhaps 10 camping trips. Definitely great value for the money. I did purchase the vinyl cover to protect it, and just leave that on all the time.

Etrailer Expert

Mike L.

11/2/2023

@Spencer Good deal, we're glad to hear that your # EJ-3520-BBX electric trailer jack is working well for you!


by:

Simple to install and such an improvement over the manual jack. Overall an awesome trailer jack for your TT!



by:

Bought this as a Christmas present for my son. Installed it July 5 and we went camping. Went camping again 2 weeks later no issue. Went a third time the beginning of August and as it was lifted to put onto his car ( Lincoln ) it slammed down thank god landing mostly on his hitch. The pins or what ever inside sheered off making it unusable. My husband emailed the company when we got home from the trip, no responds. He emailed again October, no responds. I got my “ it’s been a year, how do you like it “ email. I respond with the above. NO RESPONDS. It wasn’t cheap, it was more powerful then he needed for his size camper and it broke after TWO uses. We were hoping they’d offer and exchange but. NOPE, NO RESPONDS. VERY disappointing.



by:

Trailer Jack works great for my trailer. Easy to install and I like the LED light.



by:

My second jack from etrailer, previous jack was very dependable and worked very well for years.
This one will replace the previous jack which as damaged by user forgetting to retract it before attempting to drive off, no fault of the previous jack. etrailer service, quality and price is fantastic.
All of my RV club fellow members are etrailer fans.

Curtis

10/6/2023

Excellent, very dependable, great product at a great price

Etrailer Expert

Mike L.

10/19/2023

@Curtis We're happy to hear that your # EJ-3520-BBX electric trailer jack is working well for you!


by:

The jack works as advertised. It is strong enough to raise the back of the truck to make it easy to set the chains on the weight distribution hitch. The only design change I would make is to have the motor on the aft side (trailer side). I can no longer lower the tailgate on the truck when hitched. But for function, it is great! I also wired in a single pole, double throw switch (with a center off position) so I can use the trailer battery when not hooked to the truck. The switch is mounted inside the trailer and in the center off position it isolates the jack so no one can operate it when unattended. I would definitely recommend this jack to anyone.

Terry

2/6/2023

Totally satisfied with the jack. Works great and my trailer comes in at over 7,000 lbs. I was able to turn the motor assembly 180* and now I can lower the tailgate on the truck. this might no work on trailers wit propane bottles on the toung. I would definitely recomend this jack to anyone



by:

So far disappointed, customer service. The box was opened and damaged on the front step. I can't tell what is missing because there is no parts list. The instructions were torn and the 57" wire has vanished into the abyss because the one attached is 47" . Sure this is just a mistake but the quality controls and customer service so far is less than desirable. I have emailed Nicole and Alexzandar with pics, per their request. I asked Alexzandar if I could start a return and he said sure I would get a separate email and the shipping of $XX.XX would be deducted from my refund. Support your local dealer this was not what I was expecting from this site.

Etrailer Expert

Jenny N.

5/19/2023

I sincerely apologize how this was handled for you. I will have this reviewed and Customer Service will be in touch.



by:

Easy install for somebody reasonably handy but the lack of visuals (even when the instructions say to “see picture” that isn’t there!) is unfortunate. The instructions are also confusing because they talk about installing the fuse as close to the batteries possible for the fuse comes hardwired. It seems like they probably revised their design but did not improve their instructions. The instructions are also confusing because they talk about installing the fuse as close to the battery as possible but the fuse comes hardwired. It seems like they probably revised their design but did not improve their instructions. Still it’s a great deal and seems to work well.

Not uploading pictures because it looks exactly as advertised and exactly as in all of the other pictures.

I got the recommended matching cover and if it’s great.

Noah

7/31/2023

After a year, it still works well. Wow, there were a lot of typos in my original review but hopefully clear :D Must have done it on my phone.



by:

As always, I was extremely impressed with the customer service and efficient shipping of my order.
My first stop is always etrailer!



by:

If I were to review this product a week ago, it would have been a very different review. I bought this a year ago to replace my jack on my camper. I installed it at the end of last season and it was only used starting in May of this year. It started out great. I had no issues with raising and lowering the camper (a lot easier than a manual jack!). However, right before it was a year old, it stopped working. There was still power going ot the jack, I tried to change the fuse, nothing worked. I knew that i was still under warrenty, so we called etrailer. They were not helpful one bit. I was hung up on after i was trying to understand why i was going ot have to pay to ship this jack back to them before they would ship me my replacement. Mind you, i am still under warrenty. I don't have another jack for the camper to sit up on. So i was asking how i would do this. She was not helpful one bit and hung up. We called back and asked to speak to a manager, and he just said it was industry standard for customer to pay to ship the items back. So because they sold me a faulty jack, wanted to take no responsibility for making sure they are selling quality products, they are making me spend more money because i trusted them. If you want to try your luck with buying from this company, go for it. However, i never will again after this horrible experience we have had.



by:

Jack used on an older Airstream (25') with propane cover. There is less than 3/4" between jack shaft and cover face. This unit was the only unit I found that would not hit the cover. The vidio and pictures helped determine this unit would fit.



by:

Very solid and heavy duty jack, with bright LED lighting, manufactured by Ram. Adjustable foot piece for quicker adjusting... Jack pretty easy to install, with single wire electrical connection and 3 bolts. Jack has low gear ratio and foot shaft moves slowly, but has plenty of power to lift front of trailer. Plenty of clearance behind jack for propane tank cover on our Airstream. Replaced more expensive model that was bent at mounting flange being winched onto transport trailer.

John

2/9/2019

Jack is still slow and steady and has worked perfectly since installation... The adjustable foot unit is about an inch too tall for at lowest position some sites, based on low hitchball height of our tow vehicle, but we have used the shorter foot from prior jack as an alternate, and that solved problem...



by:

Haven’t really use it yet. Install was easy enough as far as jack. The lower plate with hole did not line up perfectly with upper plate hole. Had to do some filing for jack to fit properly. Shipping was fast considering it was over a holiday weekend. I am very pleased with etrailer. I also purchased the jack cover to keep the weather off of the jack. I am sure it will be money well spent.

David

9/7/2020

The jack has worked flawlessly



by:

Installed the new RAM electric tounge jack on my enclosed car hauler trailer. Very happy with this unit. Quick install, like the adjustable foot pad, and operated smoothly. etrailer packages well and deliveries quick.

Gary D.

4/24/2019

Working great. No problems to report. Highly recommend this product and your business! Thanks



by:

I think you guys are awesome that's why I buy my trailer parts and accessories from you!



by:

I have been more than happy every time that I have used your services. Products are always exactly what I needed. And I appreciate the timely shipping of materials. Thanks



by:

Works well, does the job. Like most electric jacks, you have to hold the button for almost a minute or so because it moves slowly. It’s a great buy at a good price. Easy to install and use. No issues with the product after the first year. We do have the problem lowering our tail gate on the truck but any Jack gives us the same problem. A longer hitch would solve that issue.


25
1740
Show More Reviews

See what our Experts say about this etrailer Camper Jacks

  • Ram Powered Jack Just Spins In Place
    It sounds like there is a bad main screw inside the RAM jack part # EJ-3520-BBX is damaged. Powered jacks have a main screw that turns inside a threaded shaft that allows the jack to rise or lower. When the shaft breaks the screw just allows the jack to spin in place. Unfortunately there is not a repair kit that will allow you to fix the inner workings of the powered jack. It would be easy to just replace this with the same etrailer # EJ-3520-BBX tongue jack. You could also consider...
    view full answer...
  • Accessory 12V Connection for 2019 Honda Odyssey to Use 400-Watt Inverter
    A 12V circuit rated for 40-amps typically needs heavier wire, usually 10-gauge, such as what we include in our 7-way kit # ETBC7. This kit has all the parts needed to upgrade 4-pole flat trailer wiring like # 118521 (the item you referenced) to the 7-way format that includes the auxiliary 12V power circuit for things like operating a powered trailer tongue jack like # EJ-3520-BBX. We do offer a 12V Outlet Kit # RM-9332, if that is the type of connector you need, but please note that this...
    view full answer...
  • Recommended Weight Distribution and Electric Jack for an Airstream Basecamp 16
    I highly suggest the etrailer.com Electric Jack # EJ-3520-BBX for the Airstream Basecamp 16. This has a pretty standard A-Frame mounting plate that will have no issue fitting the front of the trailer. It is also rated up to 3,500 pounds of lifting capacity and will be ideal for this set up. As to the weight distribution, the Fastway e2 Weight Distribution System # FA92-00-0600 will have a maximum tongue weight of 600 pounds and a minimum tongue weight of 250 pounds. This will put you right...
    view full answer...
  • Electric A-Frame Jack Recommendations for a Utility Trailer
    If you already have a battery on your utility trailer and you really like how the etrailer Electric Jack w/ Footplate # EJ-3520-BBX performs (thank you by the way) then I recommend just going that another one. Since it has a lift capacity of 3,500 lbs you will have more than enough power to get the job done. If you don't already have a battery on your utility trailer then I recommend using the Trailer Valet JXC instead. This comes in a 2K # TV54FR and 5K # TV94FR version for an A-Frame...
    view full answer...
  • Why are My Trailer Lights Not Working Properly?
    The small battery is actually used to power a break away system, like the Hopkins Engager Push-To-Test Trailer Breakaway Kit # 20099, or electric jack like the etrailer.com Electric Jack w/ Footplate # EJ-3520-BBX, but should not be affecting the lights in the trailer. What sounds like is happening is a bad ground. I would check all your ground connections making sure they are not corroded or disconnected. A bad ground can cause all sorts of weird things to happen. It also doesn't hurt...
    view full answer...
  • Dimension Needed to Know if Powered Ram Jack # EJ-3520-BBX Will Clear Tailgate
    I attached a picture of the Ram Jack part # EJ-3520-BBX that you referenced that has the dimension you are looking for plus a few extra. The distance from the upright mast to the furthest point out on the jack is 5-1/4 inches.
    view full answer...
    Image 1 for
  • Electric Jack Wont Clear Tailgate on Truck.
    Your Electric Jack # EJ-3520-BBX would be difficult to turn the 90 degrees that you are looking for. The mounting flange only has the 3 outward tabs which means you would have to either turn the jack 120 degrees or drill new holes into your mounting flange on your trailer. The Bulldog Powered Drive Trailer Jack # BD500187 comes with a round mounting plate that has provisions for multiple mounting patterns such as the 90 degrees that you are looking for. This would be the easiest way to...
    view full answer...
  • Recommendations for Improving Stability of Travel Trailer at Campsite
    The stability of your travel trailer is improved by making sure your RV is level, wheels choked, and your Lippert High-Speed Power Stabilizer Jack, # LC298707 extended appropriately on a wood or block base and not the bare ground where they can sink. I suggest using the Super Grip Chock Wheel Stabilizers for Tandem-Axle Trailers, # UF21-001091 and Stackers Leveling Blocks w/ Bag for Trailers and RVs, # A10-0920. Position these beneath your wheels to level the travel trailer and under...
    view full answer...
  • Can The Motor/Control Head On The etrailer Electric Jack Be Turned To Accommodate A Tailgate
    The motor/control head of the Electric Jack w/ Footplate # EJ-3520-BBX isn't designed to move but the whole jack itself can be mounted with the controls facing a different way. Since the mounting plate is triangular there is only three ways to mount it though. The Stromberg Carlson Electric Trailer Jack # JET-3755 has a rounded mounting plate which you could put in any direction and drill new hole as needed.
    view full answer...
  • Troubleshooting Wire Burning on Electric Jack Switch
    When wires start burning it means there's a bad connection somewhere - typically the ground. For example, electric jacks like our Electric Jack w/ Footplate # EJ-3520-BBX ground via the mounting hardware and then you'll need to check the power connection wire as well. When it comes to replacing the switch it uses part # EJ-3520-PSW which has prongs and blade-type connectors on the wires so you need to make sure the contacts and the blade connectors are clean and free of debris and corrosion....
    view full answer...
  • Recommended A-Frame Electric Jack for 7,600 Pound Trailer
    When determining if an electric A-Frame trailer jack will be sufficient for the weight of your trailer, you will just need to make sure the jack's capacity exceeds the tongue weight (not the total weight) of the trailer. The etrailer.com Electric Jack w/ Footplate # EJ-3520-BBX that you were looking at features more than enough capacity for your 7,600 pound trailer and will work great. A trailer's tongue weight will typically be around 10 to 15 percent of its total weight. This means...
    view full answer...
  • Recommended Trailer Jack Options For 1993 Jayco Eagle Camper
    For your 1993 Jayco Eagle camper weighing 6800 lbs, I am not sure if you need an A-frame tongue jack for a travel trailer, replacement landing gear for a 5th wheel, or stabilizer jacks. The side jack makes me think 5th wheel or stabilizer jack but I will give all recommendations. If your 1993 Jayco Eagle is a 5th wheel trailer, I recommend the Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs # LG-1. This landing gear has a leg length of 29-1/2 inches with...
    view full answer...
  • Would Electric Jack w/ Footplate # EJ-3520-BBX Work Well on Trailer that Weighs 8,500 lbs
    Yes, the Electric Jack w/ Footplate # EJ-3520-BBX that you referenced would easily handle the tongue weight of your trailer. This jack has a lifting capacity of 3,500 lbs and the tongue weight of your trailer is most likely around 850 lbs so this jack would easily work to lift the tongue weight and allow you to install your Husky Centerline weight distribution system.
    view full answer...
  • Could etrailer.com Jack # EJ-3520-BBX Clear Tailgate
    That's hard to say since there are factors that affect tailgate clearance aside from just the jack # EJ-3520-BBX. The overall length of the ball mount is a factor that affects this as well as the distance from the jack mounting flange to the center of the coupler ball hole. The # EJ-3520-BBX measures 5-1/4 inches total forward of the coupler jack mounting flange. See attached picture. Typically with that info you'd be able to determine if the tailgate would open.
    view full answer...
    Image 1 for
  • What Does Electric Jack w/ Footplate # EJ-3520-BBX Weigh
    The Electric Jack w/ Footplate # EJ-3520-BBX that you referenced weighs 24 lbs. It has a 3,500 lb lifting capacity. I attached a review video for the jack as well!
    view full answer...
  • Best Value Electric Trailer Jack For Toy Hauler Trailer
    The etrailer.com electric jacks part # EJ-3520-BBX and part # EJ-3520-WBX are the most valuable option for your money. The etrailer.com jacks are manufactured by RAM industries which is a very dependable and well known trailer jack manufacturer. They also will provide you with 28-1/2" of lift with 3.5K capacity and smooth operation and they feature LED lights that allow you to hook up your trailer more easily at night.
    view full answer...
    Image 1 for
  • Motor Replacement for Lippert Electric Tongue Jack with a 3500# Capacity
    I have a solution but unfortunately we do not currently have a replacement available based off of the serial number provided. For a great replacement the Electric Jack w/ Footplate part # EJ-3520-BBX would work and work well. It had 25 1/8" of lift and the 3500# capacity of your Lippert Jack. Check out the linked video I did on the jack it has a good quality and reliable feel to it.
    view full answer...
  • Should A DC Fuse For A Trailer Jack Be Warm To The Touch
    A fuse can be warm to the touch because it's causing resistance, which is totally normal to an extent. If you're melting the fuse or hurting yourself touching it then you have a problem. There are a number of reasons for this but the most common causes are from a loose connection between the fuse and fuse holder, there's a load on the fuse, or the fuse holder isn't rated high enough for the fuse. You'd need to check the fuse requirements of the specific jack you have and then choose an...
    view full answer...
  • Why Does Electric Landing Gear on a 5th Wheel Trailer Go Up But Not Down.
    If the motor is not running when you are trying to retract the landing gear then there is likely a problem with the switch and it will have to be replaced. We might have the switch but I would need to know the model landing gear you have on your trailer. If the motor is running and it will not go down then there is likely a problem with the gear box, gears in the legs, or a problem with the screw and/or nut inside the jack legs that is not letting it go down. Motors and gear boxes can...
    view full answer...
  • Recommended Trailer Jack For Trailer With 14000lb GVWR
    Since you are limiting your trailer to 10000lbs, and the average tongue weight is 10-15% of the trailer weight, you are looking at 1000-1500lbs tongue weight. With that said it is a good idea to use a jack with a larger capacity as it will be able to work easier leading to a longer life of the jack. I recommend the Electric Jack w/ Footplate and 7-Way Plug # EJ-3527-BBX which has a 3500lb capacity meaning it would be able to work fine even if you loaded the trailer to 14000lbs and had...
    view full answer...
  • Replacement Switch for Ram Electric A-Frame Trailer Jack-3500 LBS
    The replacement power switch for your Ram Electric Jack Item # EJ-3520-BBX is Item # EJ-3520-PSW. Links to additional information attached.
    view full answer...
  • What is the Weight of the Lippert Power Tongue Jack
    The Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black # EJ-3520-BBX weighs 23-lbs and the Lippert Electric Trailer Jack # LC285318 weighs 27-lbs.
    view full answer...
  • What Size Bolts are Used to Mount Electric A-Frame Trailer Jack # EJ-3520-BBX
    This has actually come up before and we found that the slotted holes in jack # EJ-3520-BBX are 1 inch long by 7/16 inches wide. So basically 7/16 inch hardware could be used. The length of the bolts depends on the trailer design. Some require longer bolts than others.
    view full answer...
  • How To Replace the Light In etrailer.com Ram Electric Jack
    You can replace the light on the Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black part # EJ-3520-BBX with Replacement Light Board for etrailer Electric Jack part # EJ-3520-LT all you would need to do is remove the jack cover and look at how the existing light board is wired. Remove that one and replace it. If the cover needs to be replaced, I recommend Replacement Cover for etrailer and Ram Electric A-Frame Jacks part # EJ-3520-BCV.
    view full answer...


< Previous
123. . .14



Do you have a question about this Camper Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Bradley B
Installed by:
Bradley B
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Amanda M
Written by:
Amanda M
Employee Zach D
Video by:
Zach D
Employee Amber S
Video by:
Amber S
Employee Thomas T
Video by:
Thomas T
Employee David F
Test Fit:
David F
Employee Michael H
Test Fit:
Michael H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924