Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack
(39 reviews)
Price: $41.15
In Stock
Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack
Item # EJ-3520-HD
Our Price: $41.15
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (39)
- Q & A (0)
- Videos (2)
- Photos
etrailer Accessories and Parts - EJ-3520-HD
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- etrailer
Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX).
Features:
- Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX)
EJ-3520-HD Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack
Video of Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of etrailer Trailer Camper Jack Parts - Replacement Manual Jack Handle - EJ-3520-HD
Ellen: Hey everybody, I'm Ellen here at etrailer.com, and we're taking a quick look at the replacement manual handle for your e-trailer or RAM A-frame jack. If something happened to that original one and you can't find it again, this is going to be that replacement to be able to manually operate your jack. If the power goes out, something happens, you'll still be able to operate that jack and get it working again.Let's take a closer look. You'll see on the one end, we'll have our hex opening, so we can get that popped onto the screw and run it up or down as needed. The part numbers this corresponds to are listed out on our product page here at etrailer.com, so if you want to double check against those, it's not a bad idea. It's about 9" long, and then about 6 1/2" wide to either end there.
There is a little hole here, so maybe if you wanted to put a little inaudible 00:00:57 pin through there to keep it cinched off to your jack, not a bad idea, as well.That's pretty much it for a quick look at the replacement manual jack handle for your e-trailer or RAM electric A-frame jack. I hope this was helpful in deciding if this was the right replacement part for you. We do have a lot of other jack and trailer accessories, and a whole lot of other stuff, here at etrailer.com, so be sure to check it out. Thanks for watching..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack - EJ-3520-HD
Average Customer Rating: 4.7 out of 5 stars (39 Customer Reviews)
Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX).by: James J10/29/2023
This was a perfect replacement for my lost manual jack handle and the price was so reasonable , I bought 2!
by: Shelley09/29/2023
It did not fit the camper trailer jack. Out $[XX]
by: Robert 07/19/2023
Great! Manual crank handle for RAM electric tongue jack. I had ordered one from another vendor and it didn’t fit. We are going camping in two days and the battery on our travel trailer was dead. This one was shipped out on the same day that I ordered it and I just tested it and it worked great!
by: Joe 10/13/2021
I ordered this tool to use just in case my camper battery was dead. I think of it as an inexpensive insurance policy. I received this quickly and am very happy with it.
by: Russell 08/31/2023
Nice tool, fast service
by: Frank04/22/2023
Shipping took too long. Took 2 days to process the order, and almost 4 days to ship. I was at a standstill waiting for the item had ordered.
by: Victor06/21/2022
After one year this handle is going strong. I use the handle on a regular bases since I do not keep my RV battery charged. Great buy.
by: Bill 04/06/2023
Fast and timely // Thank You For The Great Service
by: Robert11/28/2021
everything was just thrown together in a box-tail light fixtures-several plastic lenses-2 metal jack handles-plastic and jack handles do not mix well together-very poor packaging
Jenny N.
11/30/2021
I will have our customer service team reach out to you.
by: Scott 05/28/2021
Our used trailer was without a crank for the electric jack, this was just what we needed for the 2018 Sportsman LE.
by: Dawn08/28/2022
Great communication! Fast shipping and just what we needed! Thanks so much.
I used this company years ago with the same results !
by: Jolene12/02/2021
This was the correct product to manually operate my electric jack.
by: James09/09/2019
The manual electric jack crank was perfect and delivered when promised.
by: Edward06/26/2020
Fast Delivery! Solid steel manual jack handle at a reasonable price.
by: Amber11/04/2019
Exactly the right tool for my 2017 Forrest River Cruise Lite travel trailer!
by: Lynn I06/05/2021
The part I received was the correct part and it was delivered on time. I would recommend etrailer.com highly.
by: Charles 07/23/2022
Product arrived as promised. Thank you.
by: Steve08/01/2019
EXACT ! fit for what I needed fast shipping I’ve shopped etrailer several times now with no disappointment s
by: Al07/03/2021
You have the parts I need and you know your inventory. Excellent follow up with the customer.
by: Edward 12/06/2020
Just like the one that came with the RV.
Great quality and Price
by: Margaret 03/28/2020
Arrived quickly and is the correct part. Very satsified
by: Marion 08/28/2022
by: Chad 10/09/2022
by: Daniel 08/24/2022
by: Ronald 02/09/2023
Works
25
39
Show More Reviews
See what our Experts say about this etrailer Accessories and Parts
- What Is The Size Of The Socket Of The Replacement Manual Jack Handle For Electric A-Frame JackThe Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack # EJ-3520-HD is a 10mm socket. As far as your jack making a clicking noise, it could be a few things. First check the ground connection on the motor and ensure it is grounded correctly. This is a fairly common issue across the board as far as things not functioning properly. The next thing you can check for is your battery's voltage to make sure it is not weak and operating at the correct voltage. A minimum of...
view full answer... - Replacement Manual Jack Handle For 2004 Lance Truck Camper Model 820To find you the correct replacement jack handle for your Lance truck camper, I would need to know which jack that you currently have to be able to find the correct replacement jack handle you would need. The Replacement Manual Jack Handle # EJ-3520-HD is for our etrailer jacks and RAM electric A-Frame jacks. This jack handle will not work with a drill. If you could send me a picture of your current jack I will be able to look more into it and see if I can find you the correct part. I...
view full answer... - Manual Override Crank Handle for Ram Brand Electric Trailer JackSince you have a Ram brand electric trailer jack the correct replacement manual override crank is the part # EJ-3520-HD that you referenced which is the correct size of 10 mm.
view full answer... - Replacement Manual Crank and Cover for etrailer Powered A-Frame JackSince you have a Ram 3500 trailer jack the correct replacement you need is the Manual Jack Handle # EJ-3520-HD that you referenced. Then for the replacement cover for the manual override you'd want the part # EJ-3520-BCP.
view full answer... - Replacement Manual Jack Handle for RAM Electric A-Frame JackThe correct replacement manual crank handle for the RAM Electric 3,500 Lb Jack part # EJ-3520-BBX is the Replacement Manual Jack Handle for RAM Electric A-Frame Jacks part # EJ-3520-HD.
view full answer... - Replacement Crank for etrailer Powered A-Frame Jack EJ-3520-WBXWe do sell a replacement manual crank for the etrailer jack # EJ-3520-WBX with the part # EJ-3520-HD.
view full answer... - Replacement Manual Override Handle for A-Frame Trailer Ram JackIf the jack you have on your 2014 Coleman 262BH is a Ram jack like the part # EJ-3520-WBX you referenced the correct replacement manual handle would be the part # EJ-3520-HD.
view full answer... - How To Raise and Lower Electric Trailer Jack When Switch Is BrokenI have another option for you, but I do not recommend manually touching the wires to raise and lower your jack, as if you accidently touch the 12v power wire to the incorrect jack wire you could damage the jack. Instead I recommend using the manual override on the top of the jack with a handle like the # EJ-3520-HD as long as you have a RAM or etrailer brand trailer jack. In addition I would go ahead and replace the jack when you get a chance due to the factory wiring being cut. I recommend...
view full answer...
- Replacement Manual Jack Handle For A RAM Electric A-Frame Jack To manually operate a RAM jack like the Electric Jack w/ Footplate # EJ-3520-WBX you would simply need the Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack # EJ-3520-HD.
view full answer... - Replacement Manual Jack Handle for RAM Electric A-Frame JackThe 3.5K Rated A-Frame Electric Jack w/ Footplate, # EJ-3520-BBX has an emergency crank included. The replacement part is, Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack, # EJ-3520-HD.
view full answer... - Solution for Manual Crank of etrailer Jack that Can't Complete Rotaions Due to Propane TanksTo use the manual jack crank part # EJ-3520-HD on your etrailer powered jack part # EJ-3520-BBX if the jack is close to the propane tanks you'd need to make half turns with the crank to get around the interference. So turn the crank till it would hit the tanks and then pull it out and install it 180 degrees so that you can make the turns needed. Aside from that there really isn't a way to get a taller crank.
view full answer... - Replacement Manual Crank For A 3,500lb Ram Electric Trailer JackYou can get a replacement manual crank for your 3,500lb Ram electric trailer jack with part # EJ-3520-HD, which has a 10mm socket.
view full answer... - Replacement Manual Crank Handle for RAM etrailer.com Powered A-Frame JackThe correct replacement manual crank handle you need for your RAM Jack is the part # EJ-3520-HD.
view full answer...
- Options For Replacement Crank For Electric A-Frame JackWe have two options for a replacement crank for an electric A-frame jack, but no way of knowing what jack you have on your trailer, so you'll need to know that to get the right replacement. We have the Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack # EJ-3520-HD and the Replacement Manual Crank Handle for Stromberg Carlson Electric Trailer Jacks # SC94VR.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Kathleen M
Installed by:
David F
Installed by:
Bradley B
Video Edited:
Chris R
Updated by:
Wilson B
Written by:
Mike S
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Joe
10/14/2022
It works great! In January I was leaving for Florida. It was 3 degrees Fahrenheit, and my camper battery was dead. Luckily I had this tool to raise and lower the hitch manually, so my trip was not delayed at all.