Replacement Light Switch for Electric Trailer Jack with Footplate

Ask the Experts about this etrailer Accessories and Parts

• Does Replacement Light Switch # EJ-3520-LSW Come with Bezel
  The Replacement Light Switch # EJ-3520-LSW that you referenced does include the bezel piece you sent in a picture of that's broken on your jack. Whoever you bought this from should cover the replacement since it showed up like this. I checked our order notes though and didn't see you in our system.
  view full answer...
• Replacement Black Cover for RAM/etrailer Electric A-Frame Jack
  If you can reply to this email with the pictures I can help you out. Just be sure to let me know what the product is they are installed on!
  view full answer...
• Replacement Parts Available for the eTrailer Electric Jack with Footplate
  If you are referring to the Electric Jack w/ Footplate part # EJ-3520-BBX for black or part # EJ-3520-WBX for white then yes, we do have the correct replacement extend/retract switch and for this you will want to use the Replacement Power Switch for RAM Electric Trailer Jack part # EJ-3520-PSW. We also have several other replacement parts which I have attached for you below. Replacement Light Switch for Electric Trailer Jack with Footplate - part # EJ-3520-LSW Replacement Cap for Electric...
  view full answer...
• Replacement Light Switch for Lippert Power Tongue Jack
  If you have the Lippert Electric Trailer Jack part # LC285318 then the correct replacement light switch for this is the Replacement On/Off Switch Assembly for Lippert Components Power Tongue Jack part # LC226018. The Replacement Light Switch for Electric Trailer Jack part # EJ-3520-LSW will not work.
  view full answer...
• Recommended Switch for Off Road Light Bar # UCL22CB?
  The Optronics LED Off-Road Light Bar # UCL22CB comes with just basic wiring. The wire is 16 inches long and 16 gauge. The video simply shows us using alligator clips to a power source, but I recommend you use a switch like # EJ-3520-LSW or # PK34513.
  view full answer...
• Ram 3,500 Lb Power Tongue Jack Will Not Retract
  There could be a few different issues with your electric trailer jack. The most common issue we see is a bad ground so be sure to sand down the surface that the jack is grounded to and then use new hardware when reinstalling. If this does not work then you will want to lower the jack manually to make sure none of the internal components are damaged. If all is good with the ground and internal components then you will need to test power going to and from the extend/retract switch as well...
  view full answer...
• Replacement Switches that Fit Ram Powered A-Frame Jacks
  For the Ram brand jacks we have replacement switches with the part # EJ-3520-PSW for the power switch and the part # EJ-3520-LSW for the light switch. The Husky switch you mentioned only fits Husky jacks.
  view full answer...