Camper Jacks - etrailer

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

...to reference is the leg height. The etrailer landing gear has a retracted height of 32-3/4" and an extended height of 53-1/4". It is okay if the replacement landing gear is a little longer but you definitely...

The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…

The gearbox #RVLG-RDBOX for the Landing Gear Set w/ Handle #RVLG-8HDL can be mounted in the horizontal or vertical position. I went out to the warehouse and tested both the gearbox and lead leg together and the pins that hold the gearbox in place…

The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…

There are a couple of options to lift your 2024 Keystone Cougar 29rks depending on if your axle's sit above or below the leaf springs. If your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and…

Hey Stephen, on the front sticker of the jack leg there should be a part number listed on it as well as the brand name Power Gear. Other ways to identify it is using measurements from the jack. For example the part #LC82TF has a bore diameter of 3…

...For the etrailer covers for the travel trailers, can you please tell me how to measure for the right fit? Does the AC matter? Wanna be sure I get the correct cover. Thanks...

Hey Karl, for your 2023 Brinkley Z2900 I recommend going with the Adco Olefin HD RV Cover for 5th Wheel Toy Haulers up to 34' Long #AD49ZR. This cover will fit 5th wheels that are up to 34' long, 9' wide, and 10'6" tall so it…

Hey Mark, The 30 amp Portable Power Watchdog Surge Protector with Bluetooth, Wi-Fi, and Emergency Shut Down #HU42VR weighs 6 lbs and measures 19" including the cord, with the body measuring 12" tall; it is also 6.5" at its widest point…

The replacement landing gear motor you referenced, Stromberg Carlson #LG-142178, is a widely compatible replacement motor that will work with most major brands of 5th wheel landing gear, including Stromberg Carlson, Lippert, Venture and Atwood. These…

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

...to reference is the leg height. The etrailer landing gear has a retracted height of 32-3/4" and an extended height of 53-1/4". It is okay if the replacement landing gear is a little longer but you definitely...

The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…

The gearbox #RVLG-RDBOX for the Landing Gear Set w/ Handle #RVLG-8HDL can be mounted in the horizontal or vertical position. I went out to the warehouse and tested both the gearbox and lead leg together and the pins that hold the gearbox in place…

The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…

There are a couple of options to lift your 2024 Keystone Cougar 29rks depending on if your axle's sit above or below the leaf springs. If your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and…

Hey Stephen, on the front sticker of the jack leg there should be a part number listed on it as well as the brand name Power Gear. Other ways to identify it is using measurements from the jack. For example the part #LC82TF has a bore diameter of 3…

...For the etrailer covers for the travel trailers, can you please tell me how to measure for the right fit? Does the AC matter? Wanna be sure I get the correct cover. Thanks...

Hey Karl, for your 2023 Brinkley Z2900 I recommend going with the Adco Olefin HD RV Cover for 5th Wheel Toy Haulers up to 34' Long #AD49ZR. This cover will fit 5th wheels that are up to 34' long, 9' wide, and 10'6" tall so it…

Hey Mark, The 30 amp Portable Power Watchdog Surge Protector with Bluetooth, Wi-Fi, and Emergency Shut Down #HU42VR weighs 6 lbs and measures 19" including the cord, with the body measuring 12" tall; it is also 6.5" at its widest point…

The replacement landing gear motor you referenced, Stromberg Carlson #LG-142178, is a widely compatible replacement motor that will work with most major brands of 5th wheel landing gear, including Stromberg Carlson, Lippert, Venture and Atwood. These…