Power Stabilizer Jacks are an affordable way to upgrade to power stabilizing and easily bolt-on to your existing frame. New motor is 2-times faster than previous versions. Durable steel construction with a powder coat finish to resist corrosion.
Features:
Specs:
Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack.
Average Customer Rating: 4.7 out of 5 stars (275 Customer Reviews)
Power Stabilizer Jacks are an affordable way to upgrade to power stabilizing and easily bolt-on to your existing frame. New motor is 2-times faster than previous versions. Durable steel construction with a powder coat finish to resist corrosion.Product was just exactly as described.
To replace the stabilizer that I damaged by not raising it prior to raising the tongue of the RV. Item ordered was the one with the switch included even though I didn't need the switch. It was on sale and less expensive than the switch-less model.
Four bolts and nuts removed from each side and disconnect two wires to remove the damage stabilizer and just reverse the procedure to install the new one. I utilized blocks to raise the new stabilizer in place and the bolt holes matched up to the original mounting bracket.
A very expensive mistake but changing out the stabilizer was easy.
Mark S - 04/11/2021I can’t say enough good things about etrailer! Although my order didn’t go off without issues, the staff at etrailer provided excellent communications about the status of my order, and after the product finally arrived with some shipping issues, they were awesome responding to my concerns, and went above and beyond to make things right.
Thanks to Carol C, George J, Becky B, Derek S, and others that provided great follow up, communication, and resolution with my order! I appreciate it! You all made the difference!
And finally, after the logistical issues, I got the product installed without issues, and it works as intended. I’m pleased with this outcome!
Robert - 12/14/2021Quick delivery. Works as expected. In process of mounting to trailer. We'll see how well it stabilizes.
Russell - 08/23/2022
I replaced all 4 scissor jacks on my travel trailer with a pair of of these Lippert stabilizers. They work great and I'm really pleased with them.
Because of a propane gas line, I had to space the front unit down one inch, which wasn't really a problem. The work was done in my cousins farm shop which is very well equipped to fabricate things.
Richard V - 12/18/2020Good thing stabilizer was easy to install because there were no directions included. Item was delivered quickly. I received item within a week.
The installation of these stabilizers went about as I expected. It took several hours for the wiring and all but no real problems. They do a least as good a job of stabilizing as the old scissor jacks. Probably better but it is hard to make a comparison. They are really so much easier to use and save a lot of stooping and time. We recently went on a 5 week 5000 mile trip with 18 stops. It was really nice having these stabilizers over the old jacks. I installed them on my 30 foot Flagstaff.
Delivered in damaged boxes, product was all scratched up and 1 of the jacks was bowed in the middle. I was able to straighten it out. The jack fre frames need to be atleast half in longer to properly fit my trailer frame. It took about 6 hours to install by my self. Received no paper work with it and wiring diagram would of been nice. The jacks do work as they should.
As always etrailer was fast and efficient. The jack was a total piece of crap. It fell apart first use. Had same brand before that lasted a decade of heavy use with two motor replacements until the jack itself just wore out. This one must have been put together by a drunk - missing parts and bolts. Also the metal quality is lower.
Brooke M - 05/30/2022Easy install, on my 2012 Cyclone model 3012 By Heartland. Unit is a great design even came with 4 bolts/nuts .(I added 4 more like my original unit had)
Love that this unit has a faster motor drive!! The yellow supports are a great visual reminder the unit is down!
Would of liked it to come with a manual wrench for emergencies.
Lloyd - 09/28/2019Just received in two days, but not installed yet. A bit heavy at 70 lbs. Very well constructed of heavy gauge steel and power-coating. Only problem is no instructions, which you really don't need them, nor a wiring diagram. Four wires out of switch, two from the motor. I found the attached wiring diagram in the Q&A on the product. Hoping it takes some movement out of the back end of our Bullet Premier 31BLRP. If it does, buying one for the front.
It is always a pleasant experience dealing with etrailer.com
The order was shipped incomplete, it was not boxed there was no installation kit or instruction on how to assemble. I don’t know if this was the fault of the shipping company or your companies shipping department. But it creates problems for me.
Brooke M - 05/26/2022These jacks are cheep slow and week they wont even pick up my small A frame camper I am not impressed
Jenny N - 09/26/2022Very happy with the stabilizer Jack. Easy to install. Easy to order and arrived remarkably quick and intact. No worries
Once installed with the help of a buddy of mine, the Stabilizer is worth every penny. I did have to do a little costume work on the mount due to the Gas line under trailer. But it works well and is very easy to operate and maintain.
We have had this jack for a year on our travel trailer. It’s a 2012 Denali 311bh. It was a pretty easy install. When our trailer was built the factory drilled the holes in a funny spot so we had to make our own holes in the jack. Wired up the same. The amazing part is it’s super quiet compared to the factory one which was the older model of this unit. And this one is at least twice as fast. I would love to replace the other factory one on our trailer just for those two reasons alone. Our trailer loaded is around 12.5k lbs and this jack has no issues what so ever keeping it in place. You can identify this product by the yellow bars on it. Another product that you should check out is JT Strong arm support bars. I recommend both these products to everyone!!!!!
This jack system was very easy to install. Mounted and fit perfect, existing wholes lined up perfect.
Stabilizer bolted up easily and wiring was well presented. They seam to be very stable and prevent a lot of trailer rocking. Have used it for a season now and all is well.
Edwin - 11/14/2021Both worked great for the first 7 months or so, but now The front motor is malfunctioning. It doesn't want to extend
Brooke M - 04/28/2022This was the best thing that I have done no more impac gun or hand crank just a push of a button mounting was a little rough where my trailer was not level but bolted onto frame wish i did it sooner cant do a pic under about 12ins of snow
This product was very easy to install and it performs great. I have not had any issues with this stabilizer since I installed it.
Although fitment was a challenge, I am pleased with the units function.
My Lippert power stabilizer jack was a replacement,for one that I had damaged. My delivery was fast and installation was easy. I would highly recommend this product.
I have had 2 of these, front and back for a year now and they have worked as intended. I took off the 4 manual scissor jacks, one each corner and put these on. I had to order the extensions for the frame as I had gas pipes in the way on both ends. It took me about 4 hours to get the old scissor jacks off. Mounting the new electric ones took about the same, 4 hours and then a couple hours to wire them and put in the switches. It was bit time consuming but not hard and works and looks great. A good buy!
THE PRODUCT AS IS 2/3 OF OUR ORDERS WAS DAMAGED NO PACKING MATERIAL AT ALL!
SINCE WE DON'T HAVE THE TIME IT TAKES FOR RETURNS AND ORDERING ANOTHER WOULD END IN THE SAME RESULT EITHER WE TRY AND SALVAGE THIS OR PURCHASE ANOTHER ONE SOMEWHERE ELSE.
Sierra K - 08/25/2021Ordered two electric stabilizers to replace manual stabilizer jacks. They arrived in less than a week and took less than an hour to install. Running wiring and installing switches took a while. Downloaded wiring diagram. Anyone with basic skills should have no trouble with complete installation. Just got back from nine day trip. Stabilizers worked great
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.