Stromberg Carlson Electric A-Frame Tongue Jack - 18" Lift - 2,500 lbs
(434 reviews)
Price: $232.95
In Stock
Stromberg Carlson Electric A-Frame Tongue Jack - 18" Lift - 2,500 lbs
Item # JET-2500
Retail:$268.00
Our Price: $232.95
You Save: $35.05
This item qualifies for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (434)
- Q & A (0)
- Photos
- Why etrailer?
Stromberg Carlson Camper Jacks - JET-2500
- A-Frame Jack
- 2001 - 3000 lbs
- Electric Jack
- 18 Inch Lift
- Bolt-On
- Stromberg Carlson
- 1 Jack
- 2 Inch
Take the effort out of lifting your trailer with this electric jack from Stromberg Carlson. The sleek black jack features an LED light for nighttime use, as well as water-resistant switches and a vacuum-formed cover for protection from the elements.
Features:
- Powered jack eliminates the need for hand cranking, making jacking up your trailer a sweat-free job
- Water-resistant switches provide easy operation
- LED illuminates the area for simple nighttime setup
- Built-in device lets you easily see if your trailer is level
- Break-through handle allows you to manually operate jack if needed
- Easily bolts onto your trailer's A-frame - hardware included
- Rust-resistant, powder coated steel parts are strong and durable
- Jack cover is made of vacuum-formed plastic for extra protection from severe weather
- Zinc-plated steel footplate included
Specs:
- Bracket height:
- 9" Retracted
- 27" Extended
- Lift: 18"
- Lift capacity: 2,500 lbs
- Outer tube diameter: 2"
- Inner tube diameter: 1-3/4"
- Footplate diameter: 4-1/2"
- Motor draws 24-25 amps under load
- Power wire: 10 gauge
- 2-Year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
JET-2500 Stromberg Carlson Electric Trailer Jack - 18" Lift - 2,500 lbs
Installation Details
California residents: click here
Customer Reviews
Stromberg Carlson Electric A-Frame Tongue Jack - 18" Lift - 2,500 lbs - JET-2500
Average Customer Rating: 4.8 out of 5 stars (434 Customer Reviews)
Take the effort out of lifting your trailer with this electric jack from Stromberg Carlson. The sleek black jack features an LED light for nighttime use, as well as water-resistant switches and a vacuum-formed cover for protection from the elements.
- JET-2500
by: Ron Williams05/23/2017
I just installed my new JET-2500 trailer tongue jack in less than 15 minutes. The light and extend/retract work great. I was not sure if an adjustable drop foot is available for more length but do not think it is needed. This is second purchase, first being Equalizer hitch system which is also even better with electric jack. Etrailer exceeds customer expectations by follow up email and definite concern to keep their customers satisfied. Great Company! Thank-You Ron Williams
- JET-2500
by: Brett B.09/06/2013
Mounted on a 2012 Crossroads Z-1 251BH. Wokrs great!! No more hand cranking.
Comments
thanks for the photo. i purchase a crossroads z-1 23 foot camper and im going to buy the same jack.
-- comment by: craig h - 02/17/2015
- JET-2500
by: Patricia Cook06/16/2016
Took only about 5 mins to hook up, husband loves it. No more hand cranking when the old one went out. Great product!!! Camper goes up and down easily by pushing a button!! Priced just right...
- JET-2500
by: stu08/01/2013
Installation of the the Jet-2500 trailer tongue jack went smoothly. Quality looks good and instructions very straightforward. I hooked up the trailer to my Ford F-150 to find out I can't open the tailgate while hooked up to the truck. I removed the three mounting bolts and tried to turn the jack 90 degrees but the bolt holes don't align now. So I put it back where it belongs and will just have to work around not being able to lower my tail gate while the trailer is hooked up.......
Comments
I have the same problem have you been able to resolve it? I cant believe they made a unit with such a large head and didnt make it so it could be rotated!
-- comment by: dlh - 08/08/2015
- JET-2500
Larry A - 04/26/2017
by: Larry04/26/2016
Overall, it is a great product. I really like not having to crank the trailer tongue up and down by hand and it works very well. One suggestion for Stromberg-Carlson: Turn the motor/gear assembly so it faces away from the front of the trailer, but leave the light to shine on the hitch assembly, etc. The tongue of my trailer is short enough that the hatch on my Traverse cannot be opened when the trailer is hitched. Might apply to a pick up tailgate, too.
Comments
Same comments as I made a year ago. Overall, it is a good product.
Larry A - 04/26/2017
- JET-2500
by: David08/25/2021
Quick Shipping Good Product
- JET-2500
Rusty C - 02/04/2015
by: Rusty C07/29/2013
I have a buddy that recommended an electric jack for my new trailer He was right, made the hookup so much easier. The price was half of the one from my dealer. And the response for my order was unbelievable, I ordered the jack on Wed evening about 6 o'clock and got it the next day before 4 PM.
Comments
Love the jack, hate to think what I would have to do without it. Im getting older and the thought of cranking the front of my trailer up or down makes me cringe. Thanks again Rusty
Rusty C - 02/04/2015
- JET-2500
Rob T - 07/29/2016
by: Rob T07/11/2015
I spent all of 7 minutes pulling off the old crank lift and bolting this baby onto our Jayco Heritage camping trailer . I already love pressing a button instead of my old beat-up crank. The LED throws off a lot of light - may come in real handy. Looking forward to using it in two weeks when we go camping.
Comments
Thanks for the follow up, I love this product more every time I get to use it. Just went camping this weekend and it is really nice to be able to press the button to lift or lower.T hanks again, you guys rock.!!
Rob T - 07/29/2016
- JET-2500
by: Gary06/03/2021
The electric jack was easy to install, and works perfectly. I would recommend this product to anyone wanting to replace their hand crank jack.
- JET-2500
by: Rick06/21/2021
Came complete with all necessary hardware and electrical wiring to connect to RV 12v battery. Easy to install and works well.
- JET-2500
by: Barry07/17/2019
This jack works fine with my Safari Condo Alto F1743 trailer, which only weighs 2,300 lbs loaded. An electric tongue jack is a wonderful convenience to have. And I really like the built-in bubble level, it’s very handy to have and is all I need to ensure that the trailer is level in both directions. I have had no problems with it except one odd thing: a few months ago as I was about to prepare to level the trailer at my campsite, I looked at the bubble level and...there was no bubble. I called my spouse over and she couldn’t see it either. The trailer was already fairly level; the bubble should be visible. I jiggled the head of the jack, but could not make it appear. I assumed that the fluid had leaked out of the level, so I went online and ordered a replacement level from e.trailer.com, $16, Item # 2500-3755E, “Replacement Manual Override Cover with Level ”. No big deal. I was back home in a day or two, parked my trailer in my driveway and forgot about it until the replacement part arrived several days later. I went out to the trailer and went to remove the “override cover” on my jack and...there was the bubble, plain as day. I called my spouse out to see it; we were both so surprised! There did not appear to be anything wrong with it. So I did not replace it. We still can’t figure out how/why the bubble disappeared and then came back. My spouse noted that the day it disappeared it was a “super hot day” but we can’t recall what the air temp was, and I don’t remember it being particularly hot. The trailer was in full sun, which it normally is at our house, near San Francisco, but we don’t now recall where we were camping in California. Regardless, I highly recommend this tongue jack if you have a small lightweight trailer. Of course Stromberg makes more powerful units for bigger trailers.
- JET-2500
by: Jerry04/11/2019
Jack works really well doesn’t have a huge amp draw so the battery doesn’t take a big hit if you have to move it up-and-down installation was easy the light for the hitch is nice but it just doesn’t put out much light at all that could use a little boost from a really good LED bulb I would buy it again if I needed it. The jack works really well doesn’t have a huge amp draw so the battery doesn’t take a big hit if you have to move it up-and-down installation was easy the light for the hitch is nice but it just doesn’t put out much light at all that could use a little boost from a really good LED bulb I would buy it again if I needed it
- JET-2500
by: Philip Hassrick11/30/2020
My Stromberg Carlson Tongue Jack was destroyed when the trailer became unhitched on the freeway. I contacted Etrailer who had it in stock and shipped the same day that I ordered. Throughout the shipping I was informed of it's progress and they delivered the day they said it would. Etrailer prices are excellent as is their handling.
- JET-2500
by: Daryl Stanberry05/31/2013
I purchased this product for a completely off the wall reason, i try to make or modify differant things to fit the need at the time. this jack was used as a lifting device, for a power chair carrier. This use may be a little unusual but my grandfather was a blacksmith,and he taught me to build things to work as needed not to spend a lot of money to get what everyone else says is best. I shopped around for a power lift, and did not care fot the materials or the designs on most,and did not like the price of the really well built models. Your jack is rated heavy enough and is working fine for this purpose, with minor mounting modifacations, as of this time I am trying to redesign a manual cherry-picker and could possibly use another one of your products on that project. Your web site made it easy to find what I needed and the quality seems to be very good,also thank you for the quick delivery time.
- JET-2500
by: Ed G05/24/2019
This jack has worked perfectly for the past year. It raises and lowers my RPOD effortlessly, especially useful since I have a weight distribution hitch that requires two cycles to hook everything up. I and my back would recommend this without reservations.
- JET-2500
by: David Stevens07/28/2017
I can sum this Jack up in two words.... SWEAT FREE!!!!!!!
- JET-2500
by: Bill B.03/04/2017
Great service. On time and quality product. I have used the company before and they always come through with quality and on time. Them electric tongue jack is a boon for people like me that have had rotator cuff problems. Helps greatly with hookup and leveling. I would recommend this product to anyone who wants a little help with trailering
- JET-2500
by: Peter05/22/2019
Fitted to my camper without an problems, see picture. Thie review also covers the two Jacks bought at the same time, also shown fitted to the front of my camper. Nice sturdy construction. For reference I have a Gulfstream Ameri-Lite 14RBC.
- JET-2500
by: Dave P08/25/2016
I love it. Good product and is what I wanted, The only thing I feel is wrong is I expected the on off switch to fully shut off the power to the jack functions and not just the lite.
- JET-2500
by: Al S.09/02/2013
This has been an overall great experience dealing with etrailer.com. The quality of this jack seems to be very good. It took me all of 15 minutes to install.(I was replacing another power tongue jack, so that may have sped up the process a bit) Very easy install, the jack was ready to install right out of the box. I installed this on my 10' utility trailer which gets quite a lot of use so the power jack is a life saver. I had purchased another power jack from a local discount tool store(a move I sorely regret) and had I seen this jack on etrailer's site then, I wouldn't have gone there. The price here is a few dollars more, but the quality of this product is far better hands down. I know I'll be much happier with this product than I was with the "deal" I got from the other store. My old jack struggled to lift my trailer from day 1 but this one travels up and down with ease. So far I'm very pleased with this jack.
- JET-2500
by: Wil C.06/14/2015
Not as good as I had hoped. Jack motor is very slow and seems weak. The twist off cap on the top loses it's o-ring each time I take the cap off to manually wind the jack.
- JET-2500
by: Joe08/10/2018
I'm amazed! I ordered a electric hitch jack on Tues. Aug. 7 and received jack on Thur. Aug.9th. Now thats what I call service!!! Thank you all so much! respectfully, Joe Mondry, Red Wing, Minn.
- JET-2500
by: Kelly07/30/2021
Fits perfect
- JET-2500
by: Mark G.03/31/2015
Now that it is installed and tested, I love this product. It was very easy to install and works as advertised. The only reason I don't give it an excellent rating is because several screws on the case were obviously (visually) not tight when I opened the box. Not sure if this is an anomaly but their quality control definitely should have caught it.
27
451
Show More Reviews
Ask the Experts about this Stromberg Carlson Camper Jacks
- Recommended Trailer Jack For Trailer With 800 Lbs. Of Tongue WeightIn order to choose the correct jack for your trailer, you must first determine what type of jack you will need. You can choose from either an a-frame jack or side mount jack. Once the correct type of jack is selected, you can then begin to narrow your search down based upon weight restrictions. The trailer jack needs to be capable of lifting the tongue weight of a trailer, rather than the total weight of the trailer. The tongue weight of a trailer is typically 10-15% of the total trailer...
view full answer... - Best Electric A-Frame Trailer Jack for a 2018 R-Pod 180 Travel TrailerThe best electric a-frame trailer jack we have for your 2018 R-Pod 180 travel trailer is the Stromberg Carlson Electric A-Frame Tongue Jack part # JET-2500. This jack offers up to 18" of lift and has a 2,500 lb capacity. The 2,500 lb capacity will be more than enough for your trailer. The jack comes with a manual crank handle in the event of power loss and it has built-in LED's for use at night. The a-frame coupler on your trailer now should have a 2-1/4" jack hole opening along with...
view full answer... - Recommended Electric Tongue Jack for a 6,000 Lb Travel TrailerA trailer jack only needs to be rated for the tongue weight of the trailer when used in this location (on the tongue). However, it is always a good idea to choose a jack that is overrated for your needs as this will create less stress on the jack which will in turn improve it's life. For your trailer with a hitch weight of 620 lbs, I recommend the Stromberg Carlson Electric A-Frame Tongue Jack part # JET-2500 which is rated for use on trailers with a tongue weight up to 2,500 lbs and will...
view full answer... - What are the Dimensions of the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500I have provided a picture that shows the jack dimensions. These measurements were taken here by another Expert recently. The outer tube is 2 inches in diameter and the inner tube is 1-3/4 inches in diameter. The bracket to mount the jack uses a standard A-frame pattern.
view full answer...
- Which Capacity of Powered Trailer Jack for Keystone Outback 277RLPowered jacks are rated by their lift capacity. According to the specs I found online, the 277RL has an unloaded tongue weight of around 870 lbs. For quickest and most reliable operation, you'll want to choose The powered jack with a larger available lift capacity. In this instance, overkill is a good thing. First, the Husky jacks are no longer available. I'd recommend the Stromberg Carlson # SC63VR. The jack has a 4500 lb lift capacity, but having a higher than needed capacity will...
view full answer... - Recommended Electric Tongue Jack For A 7,600 Pound CamperWhat you need to look for will be power and the amount of lift. With your trailer weighing 7,621 pounds, you are looking at a tongue weight of 762 pounds to 1,100 pounds. With that being said, the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 having a capacity of 2,500 pounds, it will definitely be a good option. However, this also will only have 18" of lift (or 27" from the bracket when fully extended), so you will need to make sure this will lift the coupler off the ball...
view full answer... - Comparing Operating Speed of Electric Tongue JacksPowered tongue jacks like the Stromberg Carlson # JET-2500 and the others shown on the linked page do not all carry jacking speed ratings. This is because there are a lot of variables that affect speed of operation. Generally speaking, there is no simple answer to your good question. Any given jack will operate more slowly if used near its maximum weight capacity. Higher capacity jacks may often run slower than lower capacity jacks since their internal mechanisms are beefier/heavier...
view full answer... - Can 7-Way Operate Powered Trailer Tongue Jack if Trailer Battery is DeadA powered trailer tongue jack like the Stromberg Carlson Camper Jack # JET-2500 is best wired to a dedicated battery on the trailer. If the battery is dead then the trailer's 7-way connector won't be able to deliver enough current to operate the jack. A 7-way 12V circuit is intended to deliver a small maintenance charge to a trailer battery that is in good shape or to pass enough juice for a camper dome light for example, but not to power a trailer jack. The vehicle's 12V feed on the 7-way...
view full answer... - Troubleshooting Powered Trailer Jack that Will Lower But Not RaiseLowering a powered jack is much easier on the jack motor than raising it. Since yours will lower but not raise that would typically indicate that the motor is trying to draw more amperage that it can get or the ground is bad. Either way the problem is in the wiring of the jack IF the jack acts like it wants to raise but then acts like it isn't strong enough. First thing you should do is check to make sure the ground of the jack is connected to a clean metal surface and the ground strap...
view full answer... - Does Weight Capacity on A-Frame Trailer Jack Refer to Tongue Weight or Trailer WeightThe 2500 lbs reference on the Stromberg-Carlson electric A-Frame Tongue Jack # JET-2500 is the tongue weight of your trailer. As long as your trailer's tongue weight is less than 2500 lbs, then this jack will work well. The 2500 figure is the maximum amount of weight the jack will lift. Since the jack is on the trailer tongue, the jack will not lift the entire weight of the trailer, just the tongue weight. Tongue weight is the downward pressure that the coupler places on the hitch...
view full answer...
- Amperage Draw of Motor and Power Wire Gauge of Stromberg Carlson # JET-2500 Electric Trailer JackThe Stromberg Carlson JET-2500 Electric Tongue Jack uses a 12-volt motor. Under load, the motor draws 24-25 amps and the motor is fed by a 12 gauge wire. The best practice is to power the jack via a trailer mounted battery. You can use the 12-volt accessory circuit from the 7-way to maintain the battery, but it cannot charge a depleted battery. Using the accessory pin on the 7-way to directly power the jack can be problematic because of the long run from the vehicle battery. Drawing...
view full answer... - Recommended Electric Trailer Jack for Coleman CamperFor your Coleman camper, I recommend the Stromberg Carlson Electric A-Frame Tongue Jack - 18" Lift - 2,500 lbs # JET-2500. This Jack will ground through the mounting plate and has a built in device to show you when your trailer is level. It will draw about 25 amps under load.
view full answer... - Is Fastway Power Trailer Jack Flip-Foot Compatible with Stromberg-Carlson Electric Jack # JET-2500Although the tube diameters of these two power jacks are similar, 2-1/4 and 2-3/16 inches, we do not recommend trying to adapt the flip-foot mechanism from the Fastway Power Trailer Jack to the Stromberg-Carlson # JET-2500. These parts are not intended for use with one another, so for safety considerations we cannot recommend that any of their components be mixed.
view full answer... - Electric A-Frame Trailer Jack to Replace a Manual Jack when Installing Weight DistributionThe electric A-Frame trailer jack # JET-2500 is rated for 2,500 pounds. The rear of your vehicle is compressing its own suspension some so really the jack would not be lifting the full weight of the rear of the vehicle so this jack would work. With that said the higher capacity jack you go with the easier it will be for the jack and the longer it will last. I recommend stepping up to the 3,500 pound model, # JET-3755. For better performance and longevity.
view full answer... - Replacement Fuse for the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500Yes, the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 does have a 30A fuse as you can see from the attached parts picture. If you need to replace this fuse then you can use part # UF17-101066 on our site. Another possibility is that the power wire to your battery is damaged or the battery itself is drained. Both of those options would be worth looking into as well. To raise the tongue of your trailer (lower the jack leg) you need to turn the handle clockwise. If you are...
view full answer... - Recommended Powered Tongue Jack for 3-Inch Mounting Holes on Trailer with 700-lbs Tongue WeightThe Stromberg Carlson Electric A-Frame Tongue Jack that you referenced, part # JET-2500, is a great choice for replacing your manual tongue jack. This jack features the 3-inch mounting bolt pattern you need. Although the # JET-2500 uses a 2-inch tube it will work fine for you. 2-1/4-inches is a standard jack tube size, very close to your meaurement. When it comes to landing gear, winches and jacks, we always suggest going for some capacity overkill. Having a higher-rated jack than you...
view full answer... - Installation of Stromberg Carlson Electric A-Frame Trailer Tongue Jack, Part # JET-2500Installation of the Stromberg Carlson Electric A-Frame Tongue Jack, Part # JET-2500, should be completed by following all of the manufacturer instructions. You should install the jack using all three supplied star washers, bolts and nuts. The washers should be placed on the bolts first; they will dig through the paint on the top surface of the jack mounting plate to provide the essential solid ground connection between the jack and trailer frame. The nuts should be installed on the...
view full answer...
- Troubleshooting a Stromberg Carlson 2500 Electric Jack not WorkingThe Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 that you referenced grounds through the mounting hardware. It sounds like you have the 12 volt power source connected correctly, but the jack is not grounding properly. You did not say anything about having your jack installed onto your trailer so if you have not yet and you are just trying to test it before you install the jack it will not work until you do so. I attached a link to the installation instructions for this...
view full answer... - Recommended Replacement Electric A-Frame JackSince your trailer battery and power line fuse are good I suspect that your jack's gearbox has been damaged from being over-extended. Better electric jacks can have built-in safeguards to prevent this kind of damage but value-priced products like the JackQuick 3500 may not always share this feature. We do not sell this brand so we do not have replacement parts for it the way we do for the brands we carry, like Stromberg Carlson, Ultra Fab and Husky. You can use the linked page to select...
view full answer... - Recommended Electric A-Frame Trailer Jack for a 2010 Keystone Hornet M-32 RLSS Travel TrailerThe electric a-frame trailer jack I recommend for your 2010 Keystone Hornet M-32 RLSS Travel Trailer is the Stromberg Carlson Electric A-Frame Tongue Jack part # JET-2500. According to my research, you trailer should have a tongue weigh between 800 - 1,200 lbs. The Stromberg Carlson jack has a capacity of 2,500 lb therefore would be more than capable of handling the weight of your trailer. It is also always a good idea to choose a jack that is rated for more weight than the trailer as this...
view full answer... - Does the Jack Motor of the Stromberg Carlson have to be Orientated ForwardTheres really no reason why you could not install the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 in any orientation on your trailer as you would need as long as it does not interfere with anything. You will want to have the jack itself as a whole orientated. I would not recommend you attempt to rotate the gearbox case as that would not be necessary.
view full answer... - Diameter of the Inner and Outer Jack Tubes on Stromberg Carlson A-Frame Trailer Jack # Jet-2500The description is talking about the 2 different tubes on the jack. The static outer tube has a 2 inch outer diameter. The inner tube that actually moves has an outer diameter of 1-3/4 inches. A foot with a 2 inch INNER diameter would fit around the bottom of the inner tube.
view full answer... - Will a Car or Lawn Mower Battery Work on the Stromberg Carlson Powered A-Frame JackIdeally you would wire the Stromberg Carlson powered trailer jack, part # JET-2500, to a separate battery. Normally trailers with powered jacks have an auxiliary battery that is used to power accessories. If there is not a separate battery on your trailer, you could power the jack from the 12 volt power source in your 7-pin trailer connector. Here is how you would wire it to your 7-pin connector: On the 7-pin connector that is on your tow vehicle there should be a red or black wire...
view full answer... - Will Trailer Battery Drain if Camper is Sitting for Long Period of TimeJust like a car a trailer's battery is going to drain and eventually go dead while it sits. Although, it'll take longer since there isn't as much power pulling from the battery on a trailer as there is a car. Trailers do still have things that are "running" even though they're turned off, especially campers because they often have carbon monoxide sensors or refrigerators that draw a small amount of power even when turned off. The best way to prolong the battery so it still has as much...
view full answer... - Grounding the Stromberg Carlson Trailer Jack on an Aluminum TrailerIn order to ground the Stromberg Carlson Trailer Jack, # JET-2500, I recommend doing just as you said. I would run a wire like # 10-1-1 from one of the mounting bolts to the negative terminal on the battery to ensure an adequate ground.
view full answer... - How To Power An Electric A-Frame Tongue JackThere are two ways to power an electric tongue jack such as the Stromberg Carlson Electric A-Frame Tongue Jackpart # JET-2500. The first method which is the preferred method would be to hook the power wire up to the positive battery terminal on the trailer battery if present. If a trailer battery is not present then you will need to use the tow vehicle's battery via a 7-way trailer plug. On the 7-way trailer plug there will be a terminal for 12 volt power which is fed directly from the...
view full answer...
- A Frame Jack Recommendation for 28 Ft Keystone SpringdaleThe Electric A-Frame Tongue Jack, # JET-2500, has a lift capacity of 2,500 pounds. This jack will be a great addition to your 28 foot Keystone Springdale as long as it's tongue weight does not exceed the 2,500 pound capacity. I spoke with my contact at Stromberg Carlson and confirmed that the mounting bolt holes on the jack are approximately 3 inches apart.
view full answer... - How to Install Replacement Extend/Retract Switch # 7145-226023 on JET-2500 Electric A-Frame JackMy manufacturer contact advised that the four screws you have removed are the only fasteners holding the outer jack cover in place. However, I completely understand your concern about applying too much force on the plastic cover. My contact suggested gently applying a flat blade screwdriver blade around the cover's edges to find the spot that most wants to "give" a little. This point would then be your best spot to carefully apply a bit more force to get the cover loose.
view full answer... - Recommended Power Jack for Travel Trailer With 500 lb Tongue WeightAlthough the jack you referenced would work well with the amount of weight you mentioned, when choosing a jack I always recommend overkill. Choosing the highest rated jack you can find will mean the jack will not need to work so hard. This means the jack will lift the trailer more quickly and will last longer. I would recommend the etrailer # EJ-3520-WBX powered jack rated for 3500 pounds of lift. Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height...
view full answer...
- Recommended Powered A-Frame Trailer Jack for a [email protected] 320 Teardrop CamperYes, the vast majority of a-frame trailer jacks use the same bolt pattern which is 3" apart on center. Therefore you should have no problems whatsoever using an electric a-frame trailer jack on your [email protected] 320 S teardrop camper. For this, I actually recommend the Stromberg Carlson Electric A-Frame Tongue Jack part # JET-2500 over the Stromberg Carlson Electric Trailer Jack part # JET-3755 because it weighs less, 23 lbs vs 26 lbs. The 2,500 lb weight capacity will be more than enough for your...
view full answer...
Do you have a question about this Camper Jack?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality camper jacks for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate camper jack information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Installed by:
Jeff D
Installed by:
Randy B
Updated by:
Adele M
Updated by:
Shelly K
Updated by:
Jenny M
Updated by:
Mike S
Updated by:
Noah M
Video by:
Sue W
Video Edited:
Chad S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.