Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs
(68 reviews)
Price: $281.49
In Stock
Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs
Item # LC89VR
Our Price: $281.49
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (68)
- Q & A (0)
- Photos
Lippert Camper Jacks - LC89VR
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 3001 - 4000 lbs
- 1 Jack
- Lippert
- Bolt-On
- Steel
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord allows you to power the jack directly from the 7-way on your tow vehicle. Extends 6" in 47.2 seconds with 1,000 lbs of tongue weight.
Features:
- Electric jack lets you raise and lower your A-frame trailer quickly and easily
- Power Swap auxiliary cord allows you to power the jack directly from the 7-way on your tow vehicle
- Cord can be stored under jack cover when not in use
- Integrated storage ring keeps safety chains off the ground when not in use
- 3 LEDs illuminate the area for simple nighttime setup
- Helical-cut gears with angled teeth gradually mesh for quiet, efficient operation
- Crank-thru socket allows you to manually operate jack if needed
- Easy bolt-on installation - hardware included
- Heavy-gauge steel construction ensures durability and strength
- Black powder coat finish resists rust and corrosion
- Durable, textured housing prevents chips and cracks
Specs:
- Bracket height:
- 10-3/4" Retracted
- 28-3/4" Extended
- Lift: 18"
- Travel speed (w/ 1,000-lb tongue weight):
- Extends 6" in 47.2 seconds
- Retracts 6" in 43.5 seconds
- Footplate diameter: 5-1/2"
- Power consumption: 30 amps
- Lift capacity: 3,500 lbs
- 1-Year limited warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
813748 Lippert Power Stance Tongue Jack - 18" Lift - 3,500 lbs
813749 Auxiliary Power Cord for Lippert Power Stance Tongue Jack
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Arrived Damaged
- etrailer mistake
- Wrong item was ordered
Customer Reviews
Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs - LC89VR
Average Customer Rating: 4.7 out of 5 stars (68 Customer Reviews)
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord allows you to power the jack directly from the 7-way on your tow vehicle. Extends 6" in 47.2 seconds with 1,000 lbs of tongue weight.by: Mark09/09/2022
Awesome product. My back thanks you. Very easy to install. Only thing I would change is the speed of the motor. A bit slow but still better than hand cranking.
by: Kenneth05/29/2021
I was amazed at how quickly my replacement from etrailer arrived. I was a bit worried that the installation of my new jack would be more difficult that I expected. The reverse proved to be the case, it was very simple to place the trailer tongue on jack stands, remove the old jack and install the new one. As the old saying goes "even a cave man could do it."
by: #74 Jerry04/12/2023
It works great for pre loading equalizer hitch on the heavy race trailer.
by: Cody03/15/2023
Terrible, product doesn't work, etrailer refuses to allow will call for local customers
by: Georgem10/21/2021
Installation was very easy. Works fine when using battery power. I have never gotten the jack to work using the accessory power cable hooked to the back of my truck. Not sure if it's a problem with the cable, jack or whatever.
Also, the jack seems to move more slowly than the last one I had, which was also lippert.
Sierra K.
10/22/2021
Thank you for your review. I would test the 1 oclock position of your 7-way on the vehicle with a circuit tester, like item # 40376, which is the 12v power circuit. It should show active all of the time. If it is not active then the jack will not be powered by the 7-way plug, so we would need to figure out why, which is more than likely a blown fuse.
Helpful Links
by: John 06/26/2023
I’ve only used it a few times,it looks hardy and operates well. It was definitely worth the money.
by: Chris09/22/2022
I have used the unit 5 times - the power for the 7 prong no longer works and I have hardwired it into my battery.
If you have a hatchback (Toyota Sequoia), the unit protrudes too far and you will not be able to open your trunk door unless you disconnect your trailer first.
by: Kenneth 04/11/2023
Jack was easy to install and works as expected. Much easier than cranking by hand. I would recommend.
by: David01/20/2023
Jack never worked. Didn't install for a few months so I didn't try to return. Pig tail appeared to be wired wrong, black wire was hot, black on my truck is ground.
by: Chris 04/12/2023
Works great on my 34ft Avion. I would recomend anytime
by: Jeff 04/12/2023
Best thing I have bought for my boat
by: Robert08/18/2022
I didn't install the Jack but the guy who did liked it. I won't use it till we go camping.
by: Walter06/16/2022
It was a breeze to attach it to my travel trailer and worked flawlessly. Makes my job of setting up stress free.
by: Gary 01/29/2023
works great
by: John04/08/2022
Nice addition to my RPod 180, install was fast and easy, the up and down are a little slower than I hoped for but still moves faster than you can crank with the OEM jack. Very pleased with form/fit/quality, communication from etrailer was stellar.
by: Ed06/25/2021
Easy to install and came in 2 days ahead of original delivery date. I have only used it once and I am happy with it. It is slow but not noisy and sure beats cranking my old manual one.
Ed
6/26/2022
Very well
by: Donn 10/30/2022
Always the most attentive during the order and delivery process. Thank you all so much throughout my many orders
by: Chris07/24/2021
Very happy with purchase. When jack arrived the rubber plug on top was missing in the package, I sent a quick email and had the parts within 2 days! Great service Thank you!
by: Larry 06/02/2021
It bolted right into the previous bracket. The bolt pattern is a triangle. The install took an hour. It works great so far, very quiet.
by: Thomas 09/12/2022
Easy install, a little slower than I thought it would be. All GOOD
by: Peabs01/27/2022
Jack was easy to install, fit perfectly. Like others who have commented, it’s a bit slow, but in no way does it take away from the product. It’s faster than me straining my arm and shoulder doing it. It looks and feels like a very good jack. All parts were included and are also of good quality. As every order I have made, service was excellent and better than other companies, no matter the industry. Good price as well. Thanks!
by: John 12/29/2021
Sorry, sold trailer/w jack
by: Richard 08/20/2022
My back thanks you
by: Jose10/21/2021
The power plug is very flimzy the prongs are made with very soft metal and bend very easly.
by: Donald 10/08/2021
Jack came in earlier than expected and worked great on our trailer, all you have to do is hit the button!!
25
68
Show More Reviews
See what our Experts say about this Lippert Camper Jacks
- What is the Weight of the Lippert Power Stance Jack # LC89VR?The total weight of the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR is 29 pounds. I went ahead and attached an installation walkthrough video for your convenience.
view full answer... - Fit of Lippert LC89VR Power Stance Powered Trailer Jack on Utility Trailer A-FrameAs long as the tow vehicle has a 7-way trailer connector with a functional 12-v power supply circuit on the pin in the 1:00 position, the Lippert # LC89VR Power Stance powered trailer jack will plug in and operate. The jack has a 3500 lb lift capacity, and fits the industry standard 3 inch center to center 3-bolt pattern on a trailer A-frame. I've linked to an installation/demonstration video that you might find helpful.
view full answer... - Are Bracket Heights The Distance From Mounting Plate to Foot on Lippert Power Stance Trailer JackThat's a good question and yes, the bracket heights referenced does mean the distance from the mounting plate to the foot when retracted and extended for the jack you referenced, which is the following part: - Lippert Power Stance Electric Trailer Jack # LC89VR So when this jack is fully retracted, the distance from the bracket to the foot is 10-3/4 inches, and when the foot is all the way extended, the distance is 28-3/4 inches. The Power Stance is a really nice choice for an A-frame...
view full answer... - Troubleshooting Lippert Power Stance Electric Trailer Jack LC89VR No Longer WorkingI would be happy to help! Now the cause for the power not getting to your Lippert Power Stance Electric Trailer Jack # LC89VR will be dependent on if you are using the 7-way adapter to draw power from your vehicles 7-way connector, or if you hard wired the jack to the battery on your trailer. Starting with the 7-way connector option I recommend using a circuit tester like # 40376 to verify that the 12v power pin of your 7-way connector is working correctly. This is the 1 o'clock pin as...
view full answer...
- Can The Head On The Lippert Jack LC89VR Be Rotated For Tail Gate ClearanceThough the head on the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR is fixed and cannot be rotated, there is another way to get the clearance needed. The standard 3 bolt pattern this installs in is an equilateral triangle, so you technically can turn the jack and mount it not facing forward. It will work exactly the same, but the LED lights will no longer face the coupler.
view full answer... - Will the Lippert Power Stance Electric Trailer Jack Work with 4" Mounting PatternThe industry standard a-frame trailer tongue jack mounting pattern is 3" on center. The jacks we offer for this standard like the Lippert Power Stance Electric Trailer Jack part # LC89VR have slotted mounting holes so they will work even if the dimensions are slightly askew but you may have to enlarge the holes slightly if they don't quite match up. This would be the case for nearly all jacks since they use the same industry standard mounting pattern.
view full answer... - How Do LED Lights On Lippert Power Stance Electric Trailer Jack LC89VR Turn On?The 3 LED lights on the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR you were looking at will turn on when the extend and retract switch is pressed, and will stay on for 5 minutes. After 5 minutes it will automatically turn off to keep from draining your trailers battery. I included a video of the # LC89VR for you to take a look at.
view full answer... - Do You Need To Grease The Lippert Power Stance Tongue Jack? The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug # LC89VR does not require to be greased by the operator. The owners manual and installation instructions give no reference to greasing the jack. I would not recommend putting grease on the jack as the grease will capture dirt that will cause the jack to run slower and have issues.
view full answer... - Dimensions of Lippert Power Stance Electric Trailer Jack LC89VRI contacted the manufacturer for you and was able to get the dimensions of the Lippert jack: - Lippert Power Stance Electric Trailer Jack with 7-Way Plug # LC89VR. Overall it measures approximately 32-1/4 inches, with a 5-1/2 inch diameter footplate, and is 21-1/2 inches from the top of the bracket to the top of the jack.
view full answer...
- Weight of Lippert Power Stance Electric Trailer Jack The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR is 45 lbs at shipping. The packaging will likely be a couple lbs so you will want to consider that. The Power Stance without the plug # LC69VR has a shipping weight of 40 lbs.
view full answer... - Why Would The Lippert Power Stance Work Off The Auxiliary Cord And Not The Coach Battery? It sounds like you have one of two possible issues with the Lippert Power Stance Electric Trailer Jack # LC89VR. First there is a fuse on the power wire that is not present on the Auxiliary Power Cord # LC79VR. Be sure to check the fuse. The second issue to check is your ground connection. Since your trailer frame is painted as well as the jack the mounting brackets do not always make the best contact. The jack uses the frame as the ground circuit so you may need to grind off some of...
view full answer... - Recommended Electric Ground Control For A Jayco Eagle Travel TrailerYes, The Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000 pounds # LC672136 will work for you. This system will automatically level and stabilize your Jayco Eagle Travel trailer. It has 5 precise, motorized jacks that can be operated by the included control panel or via your smart device only if your RV has WI-FI and a factory-installed OneControl system. The system has a sturdy steel construction and has a corrosion-resistant black powder coat finish....
view full answer... - Is It Possible To Power The Lippert Electric Trailer Jack Off Of A 7-Way ConnectionThe Lippert Electric Trailer Jack with Footplate # LC285318 doesn't come with 7-way plug to power the jack but you can just wire it to the 12v hot lead of your trailer's 7-way cable to power the jack off of the 7-way instead of the trailer battery. If you follow the 7-way cable on the trailer it will lead to the junction box where you can test for the 12v hot lead of the 7-way. Lippert also offers the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug # LC89VR, which comes with...
view full answer... - Will Lippert Smart Jack Electric Trailer Jack Work with 24V SystemThe Lippert Smart Jack Electric Trailer Jack # LC643589 is designed for a 12V system so if this is the jack for you then you'll need to convert your 24V system to a 12V system. An alternative option is to use the Lippert Power Stance Electric Trailer Jack # LC89VR instead. This doesn't have the smart features of the jack you're looking at but it does come with a detachable 7-way plug you can connect to the back of your truck so you won't have to mess with any kind of converter. Attached...
view full answer... - Does Lippert Power Stance Electric Camper Jack Come with 7-Way Plug?The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR comes with the auxiliary power wire for trailer 7-way power connection. However, the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR comes with the power wire for the trailer battery connection only. The Auxiliary Power Cord for Lippert Power Stance Electric Trailer Jack # LC79VR is sold separately and is 6 feet long.
view full answer... - Troubleshooting 3500lb Electric A-Frame Jack on 2020 Ford F350 It sounds like your 2020 Ford F350 may either be missing or have a blown fuse or relay. Some newer trucks will even not have the relay installed on the charge line portion of the 7-way plug. I would consult your owners manual to see if the correct fuses and relays are in place or if they are damaged. It looks like it should be fuse # 26 (30 amp) of the under hood fuse box.
view full answer... - Replacement Switch For The Lippert Power Stance Electric Trailer Jack The replacement switches for the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug # LC89VR have been discontinued but you could use a universal switch like the JR Products RV Landing Gear Switch # 37213635 in their place. This switch may require a bit of altering to the motor's housing to fit.
view full answer... - Does the Lippert Power Stance Electric Trailer Jack # LC89VR Include a Manual Crank Handle? Yes, the Lippert Power Stance Electric Trailer Jack # LC89VR does come with a 19mm crank handle. As an alternative you can use a 19mm socket and ratchet to operate the jack as well. This is also a common size used on a Lug Wrench # PT88VR if you are in a jam.
view full answer... - Lippert Power Jack Won't Retract.Since it won't retract you'll need to replace the switch with Replacement Extend/Retract Switch for Lippert Electric Trailer Jack # LC49MD.
view full answer... - Using Vehicle Battery To Power Trailer Tongue Jack.Great question. You technically could connect the Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 21-3/4" Lift - 3,500 lbs - White # BD500188 to your vehicle lights, but we do not have the connector you would need to just plug into your tail light plug. I have a solution for this though. You can get the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR. This unit comes with a 7 way connection, allowing you to plug in and draw...
view full answer... - Jack Cover for Lippert Smart Jack LC89VRFor a cover for the Lippert Smart Jack # LC89VR you'd want the part # UF38-944020.
view full answer... - Does The Lippert Power Stance Electric Trailer Jack Have A Drop Leg For Quick Operation?The Lippert Power Stance Electric Trailer Jack # LC89VR does not have a drop leg. The pin you see by the footplate is only for the footplate to remove and install it. The retraction and extension of the leg is electronically controlled. If you're looking for the fastest jack, I HIGHLY suggest getting the Trailer Valet JXC # TV54FR. I know it's not an electric jack, BUT you can use an electric drill to control the extension and retraction of the leg. I've found that electric jacks are not...
view full answer... - How to Power Electric Trailer Jack When Vehicle With 7-Way Isnt AvailableTo run the jack using 110V shore power, you'll need a bench-top type 12-volt power supply which you can easily find online. You'd also need a 7-way socket and pigtail like # 20024. If you choose a power supply with screw terminals on the front of it, the black pigtail wire would connect to the positive terminal and the white pigtail wire to the negative terminal on the power supply. You'll want to use a power supply capable of putting out at least 30A. To run the jack off the trailer...
view full answer... - Amps required for Power Stance Tongue Jack with Power Swap CordThe Lippert Power Stance Electric Trailer Jack # LC89VR draws 30 amps so you'd need to upgrade the wiring of your 12 volt accessory circuit to 10 gauge like with # 10-1-1 which we sell by the foot.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Andrew K
Installed by:
Kathleen M
Edited by:
Lindsey S
Video Edited:
Joshua S
Written by:
Kristina F
Updated by:
Mike S
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
3/17/2023
But we do have Will Call available for local customers. It all depends on what you are looking for. Are you wanting to come in purchase something and pick it up? Then no, that service is not available due to our new additional warehouses that we have now. There is no guarantee that the part you are needing is in our Will Call location. So, we do not offer local pick up anymore. However, you are definitely free to come into our Vehicle Consultation Center for some assistance in getting the parts that you are needing ordered.