bing tracking image
  1. Camper Jacks
  2. Ultra-Fab Products
  3. A-Frame Jack
  4. 3001 - 4000 lbs
  5. Electric Jack
  6. 18 Inch Lift
Ultra-Fab Electric A-Frame Jack w/ 7-Way Plug - 18" Lift - 3,500 lbs

Ultra-Fab Electric A-Frame Jack w/ 7-Way Plug - 18" Lift - 3,500 lbs

Item # UF38-944037
lowest price pledge
Retail:$316.23
Our Price: $205.59
You Save: $110.64
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Plug this fast 12V jack into your 7-way trailer connector for power and get quick, simple lifting. Rust-resistant, die-cast aluminum cap and steel gears make for a long-lasting jack. Extends 6" in 25.3 seconds with 1,000 lbs of tongue weight. Call 800-298-1624 to order Ultra-Fab Products camper jacks part number UF38-944037 or order online at etrailer.com. Free expert support on all Ultra-Fab Products products. Guaranteed Lowest Price and Fastest Shipping for Ultra-Fab Electric A-Frame Jack w/ 7-Way Plug - 18" Lift - 3,500 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (233)
  • Q & A (0)
  • Photos
  • Why etrailer?

Ultra-Fab Products Camper Jacks - UF38-944037

  • A-Frame Jack
  • 3001 - 4000 lbs
  • Electric Jack
  • 18 Inch Lift
  • Bolt-On
  • Weld-On
  • Ultra-Fab Products
  • 1 Jack
  • 2 Inch

Plug this fast 12V jack into your 7-way trailer connector for power and get quick, simple lifting. Rust-resistant, die-cast aluminum cap and steel gears make for a long-lasting jack. Extends 6" in 25.3 seconds with 1,000 lbs of tongue weight.


Features:

  • Tongue jack positions quickly and easily
  • 12V Motor powers jack, eliminating need for hand cranking
    • Built-in, water-resistant toggle switch for easy operation
    • Integrated circuit breaker prevents motor damage
    • All-steel gears are strong and durable
  • 7-Way RV-style plug pulls power from your vehicle's trailer connector
    • Great for trailers without batteries
    • No need to manually wire for power
  • Dual side lights make it simple to set up your camper at night
  • Emergency, ratchet-style crank socket included
    • 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend
  • Zerk fitting on the lower stem assembly allows access to grease the threaded rod, which leads to a longer jack life
  • Easy bolt-on or weld-on installation for A-frame trailers
    • Hardware not included
    • Mounting holes fit 2" or 2-1/4" spacing
  • Round, removable footplate included
  • Die-cast aluminum cap resists corrosion
  • Sturdy steel construction with black powder coat finish


Specs:

  • Bracket height:
    • 9-1/2" Retracted
    • 27-1/2" Extended
  • Lift: 18"
  • Travel speed (w/ 1,000-lb tongue weight):
    • Extends 6" in 25.3 seconds
    • Retracts 6" in 23.7 seconds
  • Lift capacity: 3,500 lbs
  • Outer tube diameter: 2"
  • Inner tube diameter: 1-3/4"
  • Footplate diameter: 6"
  • 2-Year warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



3502-7 UltraFab Tongue Jack with 7-Way Blade-Style Plug - 3,500 lbs






Customer Reviews

Ultra-Fab Electric A-Frame Jack w/ 7-Way Plug - 18" Lift - 3,500 lbs - UF38-944037

Average Customer Rating:  4.7 out of 5 stars   (233 Customer Reviews)

Plug this fast 12V jack into your 7-way trailer connector for power and get quick, simple lifting. Rust-resistant, die-cast aluminum cap and steel gears make for a long-lasting jack. Extends 6" in 25.3 seconds with 1,000 lbs of tongue weight.

- UF38-944037
by:

I've had this power jack for about a year and it works flawlessly, it beats hand cranking. And not to mention the great service from etrailer their the best in the business.


Comments
Absolutely perfect in fact I used my trailer today, I had a little trouble with my first electric jack , You couldn’t ask for a better company they sent me another jack under warranty I returned the old one in the same box, took it to UPS done. It’s very satisfying to deal with an American company that really stands behind their product. Thank You
Randy - 01/26/2018



- UF38-944037
by:

Bought Pro Series Weight Dist Hitch, Jameson C was very helpful picking the right one out , ordered it on Friday and it arrived on Wednesday a day earlier than expected. Placed a second order for an electric jack and misc. parts. Extremely happy with their service. I don't review stuff but these guys deserve one.



- UF38-944037
by:

The electric A FRAME jack with the 7 -Way Plug is the second one that I ordered.The unit is most helpful as it has the electric hook up to the plug in and do not require an extra battery. Very quick to install.I would recommended that you include with the star locking washers 3 new mounting bolts. When removing one of the original mounting bolts it broke.


Comments
I liked the first one so much that I purchase another one for my other trailer
George - 06/13/2019



- UF38-944037
by:

I think it is a great product that works like it’s supposed to.



- UF38-944037
by:

The Jack works great. However there is no documentation as to how much current draw it uses and I was frequently blowing fuses. I finally replaced and in-line fuse with a self setting circuit breaker and I never had a problem after that. Also after just a short time the lights on exterior stopped working.


Comments
Perfectly!
Johanne K - 07/25/2018



- UF38-944037
by:

Great product. The only problem I've had is, if you raise the jack, say after hitching up, and then hit raise instead of lower, the fuse in my vehicle blows. If the jack is already topped or bottomed out and you try to go in the wrong direction the fuse for the trailer lights blows. So I just make sure I leave some room in either direction. Jack was very easy to install, and combined with the eTrailer hitch camera life is much easier.



- UF38-944037
by:

Great product, and great value. I do not expect to have any trouble with this electric jack. By having a jack that runs off the trailer plug on my truck, I will never have the chance of damaging the jack motor due to powering a jack off a battery with less than 12 volts. I installed this on a 26ft camp trailer that was difficult to manually raise or lower due to a back injury....now I can enjoy camping again.



- UF38-944037
by:

This powered jack works great on my 6x12 enclosed trailer. i have the trailer loaded down with tools and this jack handles the load well. In the past year I have used the jack multiple time a week and never have had an issue. This is a great product for a fair price compared to others.



- UF38-944037
by:

What I appreciate most about this purchase is the helpful and complete website @ etrailer.com that let me compare various makes and models and learn just which unit to buy. I'm no idiot, but at the same time I didn't exit the womb with complete knowledge of which electric jack to buy. Because I use a load-leveling hitch, I need to take the weight off the trailer tongue and lift the weight off my truck's frame. For this reason, I bought the highest-rated (in pounds) lift that would fit my 2" mounting hole. The "Ultra-Fab Electric A-Frame Jack w/ 7-Way Plug - 18" Lift - 3,500 lbs" installed in about 20 minutes and lifts my 20' camper tongue beautifully. Since it's October in VT and the leaves are already turning, I won't have much time to test it before winter, but the early results are simply perfect. Finally, the price was competitive, the shipping was free, and the shipping was fast. I have come to appreciate etrailer.com as a vendor.



- UF38-944037
by:

I am 80 years old and it was hard to manually crank the camper up, The Ultra - Fab UF38-944037 jack was a life saver for me works great.


Comments
I have sold the camper, the last I knew it was working great
Perry W - 03/09/2018



- UF38-944037
by:

Replaced a Canadian made clone that failed after 11 uses. Sounds completely different when using. 2 year warranty, available 5 year seems too good to be true. No idea what the difference is between this one and the 158 one. Nice thick 12 gauge power wires look and work as expected. Not that big of a deal, but wish the 7 way had a 4 way piggy back plug. 9.5 out of 10. Used on my 6x12 utility trailer, probably has 1500 lbs lift, so practically nothing to the motor. Used 2 times a week during mowing season.


Comments
Simply works
Jason C - 06/26/2016



- UF38-944037
by:

The jack works really well! There was an issue with the first one I received being damaged in shipping but etrailer spoke directly with the manufacturer where it was drop shipped from and they immediately sent a new jack. Wonderful customer service from etrailer and Ultra-fab.



- UF38-944037
by:

The Ultra Fab 3502-7 went on my 6x12 enclosed trailer with ease and the bolt pattern matched perfectly. The speed seems to be fine and the footpad is bigger than the one on my old jack. The price was way cheaper than anything else comparable that I found on the market.


Comments
My jack is still working perfectly. Cant imagine not having this great product.
John B - 06/23/2016



- UF38-944037
by:

We had problems getting the electrical plug to work with our truck. Used the manual crank on the top to raise and lower it. We worn that part out so had to order another jack. Wired it to the trailer battery directly with an in-line fuse and it has worked perfectly since.



- UF38-944037
by:

Works great. Put it a Jayco and when I traded it in kept it and put on my new Summerland. It does all that I hoped and has made hooking up and unhooking a breeze. It has made my setup quicker and easier. I am glad I purchased it. Also, your price is so much lower than anyone else for the same jack. I love that is power by my tow vechile and I can still use it if my battery on my trailer dies or is discharged. I would highly recommend it to others to purchase. David.



- UF38-944037
by:

I received the Ultra -Fab Electric this morning.It took me 20 minutes to remove my present trailer Jack and install my new Electric jack.I tested it's performance and I'm really impressed how easy it was to install and how great it works.No more manual cranking .When we get to the Race Track now I will be the envy of my fellow racers.



- UF38-944037
by:

We loved the jacks ease of use. But I over extended the jack unknowingly and stripped the PLASTIC GEARS. I just contacted the company (Ultra fab ) and they said it should not have happened and immediately they shipped me new gears ( STEEL) . We will be putting them in this week. If the gears had held up I would have given this 5 stars. Hopefully this won’t happen again with the steel gears.



- UF38-944037
by:

Very easy install and functions as advertised, a lot easier than the old hand crank I had before. Thanks for a great product at a great price!


Comments
Products are performing as advertised! fully satisfied.
Brian J - 10/23/2017



- UF38-944037
by:

Only drawback is that the plate that mounts to the frame is circular. I had to move the battery holding tray on my '08 Jayco in order to mount it.



- UF38-944037
by:

Great value for the price. Jack should have a warning device built in to alert (stupid people like me) when you are approaching the end of travel either up or down, so that your not blowing fuses all the time. My personal thanks to you for doing a follow up after a person has had time to actually USE the product.



- UF38-944037
by:

i don't normally write reviews but this product does the job for me. i have bought items from this vendor before with no problems and for my trailer each item has made loading and unloading a breeze and hooking the trailer up easy with no more cranking.



- UF38-944037
by:

I have very bad shoulders and this is a life saver. Easy to install and only took a few minutes. It took longer to block my trailer than to put it on. Great price for the quality.



- UF38-944037
by:

This makes me feel I have been in the dark ages too long. Time after time, I have bent over (with plates and screws in my back) and jack my trailer up and even turning forever to get the leg down. Now, I press button and it is done for me. I have spent more money on a lousy family dinner at a restaurant than this cost. So I ask myself, "What were you thinking?" I have needed this for a very long time. This even has a 7/way plug! No external battery required...duh.



- UF38-944037
by:

I'AM VERY SATISFIED EASY TO INSTALL WORKED GREAT RIGHT OUT OF THE BOX DELIVERY WAS VERY TIMELY THANK YOU EVERY THING I HAVE PURCASED AT E TRAILER HAS BEEN GREAT



- UF38-944037
by:

Glad to have it. EASY installation. Going camping this weekend to try it out, on my 18 foot camper trailer. Nice to not have to do all the hand cranking. Suggested the package include new bolts, rather then requiring use of old bolts. Awesome to just plug it into my vehicle and raise and lower. Nice feature having lights. I recommend it at this time.


26
234
Show More Reviews

Ask the Experts about this Ultra-Fab Products Camper Jacks



  • Trailer Jack for 2019 Forest River Micro Lite
    The electric jack I strongly recommend for your 2019 Forest River Micro Lite 21FBRS is the Phoenix Electric Trailer Jack # UF38-944040 because of its unparalleled performance in regards to speed. This jack will give you 10" of travel in just 18 seconds, making it the sports car equivalent of electric trailer jacks; it has 22-1/2" of total travel and a 4,000 lb lift capacity, which is more than enough for your Forest River. This jack does get wired to a 12 volt power source, as you can see...
    view full answer...
    Image 1 for
  • Recommended A-Frame Power Jack for a Wells Cargo Enclosed Trailer
    I really like the Trailer Valet JXC Trailer Jack rated for 5,000 lbs # TV94FR. This is a newer type of jack that is actually operated by a power drill and I've seen it in action and it moves a lot faster than pretty much any other jack on the market, plus it comes in at a fraction of the cost. The power drill isn't included but since Wells Cargo trailers are typically used for job sites I would imagine you're already carrying one anyways. When you don't have access to the drill or perhaps...
    view full answer...
  • Recommended Maintenance on Ultra-Fab Electric A-Frame Jack Part # UF38-944037
    I spoke with my contact at Ultra-Fab regarding your Electric A-Frame Jack # UF38-944037. There is no specifically recommended grease to use but something like the LubriMatic LMX Industrial Strength Grease # L11390 should work great. There is not a specific grease fitting that is needed. The best way to access the moving parts is usually to spray the grease up the inner leg with the jack upside down. Greasing the power head for the gears every other year, depending on usage, is a good...
    view full answer...
  • Troubleshooting Trailer Life 4500 lb. Electric Tongue Jack with Flashing LED and Beeping
    Your Trailer Life powered jack is made by Ultra-Fab and similar to our Phoenix Electric Trailer Jack # UF38-944040. I reached out to my contact at Ultra-Fab who confirmed that if the red LED flashes for 3 seconds, a high amp situation exists and the jack will automatically turn off after that. The jack will then wait 5 seconds and then reset. This process is repeated if it continues to sense a high amp draw. Assuming your batteries are good, the most likely cause is a bad connection....
    view full answer...
    Image 1 for
  • Troubleshooting Ultra-Fab Electric Trailer Jack UF38-944037
    Thank you for your purchase of the Ultra-Fab electric trailer jack # UF38-944037. This tongue jack includes a wired 7-way style plug for power, and it does indeed have a 2-year warranty. Since you purchased yours only a couple of months ago I suggest that before you uninstall it that you check your Silverado's power distribution box for a blown fuse. This is the most likely reason it has stopped working. According to the online owner's manual for your truck (page 391) the trailer battery...
    view full answer...
    Image 1 for
  • How Do Powered Trailer Jacks Draw Power, From Battery or 7-Way
    The Ultra-Fab Electric A-Frame Jack # UF38-944037 that you referenced would simply plug into the 7-way at the rear of your tow vehicle and would draw the power needed for the jack to work from the vehicle battery. Most all other tongue jacks are hard wired to the trailer battery directly. A good example is the Lippert # LC285318 tongue jack rated for 3500 pounds.
    view full answer...
  • Attaching Ultra-Fab Electric A-Frame Jack Directly To Trailer Battery
    To wire the Ultra-Fab Electric A-Frame Jack, part # UF38-944037 to your trailer, all you have to do is cut the plug off, separate the red from the black wire and connect the red to the positive post on the battery and the black wire to the negative post on the battery. My contact at Ultra-Fab also told me they recommend using an inline 40 amp fuse for the positive cable.
    view full answer...
  • External Dimensions of Ultra-Fab 3.5K A-Frame Electric Trailer Jack
    On the Ultra-Fab A-frame trailer jack # UF38-944037 from the top of the mounting plate to the bottom of the gear box it is 14-7/8 inches. I have included a picture showing several external measurements for this jack.
    view full answer...
    Image 1 for
  • How Does the Stromberg Carlson Electric Trailer Jack # JET-3000NG Get Power
    Stromberg Carlson Electric Trailer Jack # JET-3000NG gets its power from a trailer mounted battery. If you do not have a battery and don't want to add one there is a jack that plugs into a 7-Way connector to receive power. It is Ultra-Fab Electric A-Frame Jack # UF38-944037. I have included links to videos on both jacks for you.
    view full answer...
  • Troubleshooting Ultra Fab Powered Jack that Stopped Working After Winter Storage
    The Ultra-Fab Electric A-Frame Jack # UF38-944037 that you have gets power by plugging into a trailer connector 7-way on a vehicle. Typically what you described is corrosion on the connector from driving through the winter. Try cleaning of all of the pins on the 7-ways of both the vehicle and the jack and try again. If still nothing you will want to verify that the 7-way on your vehicle does have power on the 12 volt circuit. This is the 1:00 pin of the 7-way on your vehicle.
    view full answer...
  • Connecting the Ultra-Fab Electric A-Frame Jack with 7-Way Plug to Power
    The Ultra-Fab Electric A-Frame Jack # UF38-944037 that you referenced is designed to get power from the tow vehicle by connecting to the vehicle's 7-Way trailer connector. The connector on the jack will plug into the vehicle's 7-Way socket in place of the trailer's connector. The jack has a 7-Way RV-style plug that uses the ground and 12V power wire connections at the rear of your tow vehicle in order to power the jack. The # UF38-944037 is a great jack option for trailers that do not...
    view full answer...
    Image 1 for
  • Can I Wire and Electric Trailer Jack Directly to the Truck Battery
    You could technically wire an electric trailer jack directly to your truck's battery, but that isn't really the most practical setup. I've seen one guy pull out his jumper cables every time he wanted to use the jack in this fashion, but I can't say the safety factor didn't worry me. Another thing to consider is that the wire gauge used on electric trailer jacks isn't the most ideal for running up to the front of a truck due to the wire length required and the amp draw of the jack motor....
    view full answer...
  • Troubleshooting Ultra-Fab 4500 Electric Tongue Jack That Blinks and Does Not Operate
    The most probable cause for the lights on your Ultra-Fab electric tongue jack to blink, and for the jack not to operate, is a weak battery and/or grounding problem. This jack grounds through its round mounting flange which contacts the trailer frame. These two mating surfaces must be clean bare metal, free of paint, rust, grease and dirt. Often the fix is simply to unbolt the jack and sand the bottom of the flange and the top of the mounting point on the trailer to expose bare metal. An...
    view full answer...
  • Powered A-Frame Jack Recommendation that Uses 7-Way Plug to Draw Power
    We have a powered A-frame jack that uses a 7-way to power the jack like you are interested in. For that you would want the Ultra Fab part # UF38-944037. This jack has a 3,500 lb lifting capacity. I attached an install video for more info for you to check out as well.
    view full answer...
  • Manual Crank Option for Ultra Fab Powered A-Frame Jack
    For the Ultra-Fab powered A-frame jacks there isn't a manual crank handle available since the manual crank is a 14 mm bolt head. This was designed so that you wouldn't have to remember to keep a crank handle with you and could just use a wrench and/or socket. The only option we have is the part # UF48-979005 which can fit a power drill and allow you to quickly operate the manual crank.
    view full answer...
  • Options for A-Frame Trailer Jack on Trailer Without Battery
    There is a jack that plugs directly into a 7-way but the Stromberg Carlson Electric Trailer Jack # JET-5000NG will need a separate 12 volt battery for power as it does not come with a 7-way. The issue is that the your vehicle wiring may not be rated high enough to wire it to a 7-way and you risk overloading your truck's wiring. If you want to use the Stromberg Carlson Electric Trailer Jack # JET-5000NG I strongly recommend adding a separate 12 volt battery and housing it in a solar-powered...
    view full answer...
  • What Size Battery Should be Used to Power Bulldog Electric A-Frame Trailer Jacks
    A standard car battery will work to power Bulldog trailer jack # BD500199. The battery will need to have an amp hour rating greater than 30 amps which is the max current draw of most electric A-frame jacks. Other option is to use jack # 3370093500 or # UF38-944037 provided your tow vehicle has a 7-Way trailer connector with functioning 12 volt circuit. Both of these jacks are powered through the 7-Way so no battery is required on the trailer to run the jack. I have linked videos for all...
    view full answer...
  • Are Fuses Needed on the Wiring for the Bulldog Powered Drive Trailer Jack BD500200
    The Bulldog Powered Drive a-frame trailer jack # BD500200 is circuit protected internally so additional fuses or breakers are not required. The jack should be ran off of a trailer mounted battery and not off of the 12 volt circuit through the trailer connector. Tow package wiring is not heavy enough for the full amperage draw of the jack and it could result in melted tow package wiring and/or a drained vehicle battery. For a jack that was designed to plug into a 7-Way trailer connector...
    view full answer...
  • Troubleshooting Blinking Light and Nothing Working on TL4500 Electric Camper Jack
    We do not currently carry the TL4500 model jack you mentioned but if the ground is good and your battery is fully charged then there is likely a short somewhere on the wiring that is causing the issue you're having. I recommend simply inspecting the jack's wiring for any damaged, pinched, or exposed sections that need to be replaced. You can also remove the housing to inspect the switch wiring or to see if any water might have found its way inside that could be causing the short. If everything...
    view full answer...
  • Power Wire Gauge on Ultra Fab Powered Trailer Tongue Jack # UF38-944037 and # UF38-944017
    I checked with my Ultra-Fab representative, and found that the power wire on the # UF38-944037 is the same as that of the # UF38-944017. Both are 10 gauge. Powering a jack off of a trailer mounted battery will work better than using the accessory circuit off the 7-way. The closer a powered accessory (like a tongue jack) is to it's power source, the better it'll operate, due to the fact that the longer the wire run is, the more power you'll lose along the way.
    view full answer...
  • What Size Battery Should be Used to Power an Ultra-Fab Electric A-Frame Trailer Jack
    The 3500 pound Ultra-Fab A-frame jacks such as # UF38-944037 have a 25 amp circuit breaker to handle the draw of the motor so the battery will need to be rated at least that high which usually isn't a problem for 12 volt car batteries. The slow blow fuse is actually a 30 amp. A breakaway battery will not be sufficient since the amp hour rating is too low. You really need an actual car battery.
    view full answer...
  • Powered A-Frame Trailer Jack Recommendation for a 6,500 lb Trailer
    Typically a trailer's tongue weight will be between 10 and 15 percent of the total weight of the trailer. Since your total trailer weight is 6,500 lbs your tongue weight would be between 650 and 975 lbs. The Ultra-Fab Electric A-Frame Jack # UF38-944037 has a 3,500 lb capacity so it would work well on your trailer and would have more than enough capacity.
    view full answer...
  • Can a Manual A-Frame Trailer Jack be Raised and Lowered Using a Power Drill
    Like you said there are some stabilizer jacks and even some winches that will allow you to attach a drill to raise/lower or reel in legs or line much faster. But there are no A-frame jacks, or any regular trailer tongue jacks, that I have seen that have this type of feature. If manually cranking the handle starts to be a chore the best option is to go with an electric jack. The most cost effective one is Ultra-Fab jack # UF38-944037 rated for 3,500 pounds.
    view full answer...
  • Installing the Ultra-Fab Electric A-Frame Trailer Jack # 38-944017
    The Ultra-Fab Electric A-Frame Jack - 18" Lift - 3,500 lbs # UF38-944017 can be wired for both the power and a ground to go to the battery, you would just need to add the jumper wire for the ground connection as it is designed to be grounded to the trailer through the mounting flange. The # UF38-944037 has a 7-way plug to power the unit so no other power is needed if you prefer.
    view full answer...


< Previous



Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R
Employee Wilson B
Updated by:
Wilson B
Employee Halie H
Updated by:
Halie H
Employee Mike S
Updated by:
Mike S
Employee Matthew E
Updated by:
Matthew E
Employee Eric H
Updated by:
Eric H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.