1. Home
2. RV & Camper
3. Camper Jacks
4. Leveling Jacksx

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…

...where do I find the model for the leveling system I have?. I have a 2002 holiday ramble septer. 40ft. It has the power gear system. Rear left jack is leaking. thank you...

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…

The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…

Hey Ty, what size hitch do you have and how much of an extension do you need? The Curt extension part #C45048 that you referenced fits a 2-1/2 inch hitch and provides a 24 to 36 inch extension.

The replacement landing gear motor you referenced, Stromberg Carlson #LG-142178, is a widely compatible replacement motor that will work with most major brands of 5th wheel landing gear, including Stromberg Carlson, Lippert, Venture and Atwood. These…

...I have class a monaco knight 40pdq 2006 I need to replace the front leveler The old one is power gear 18,000 Pound I dont know the parts number Can you please tell me what the replacement I need...

You should not have a problem with the camper sliding out when you are using any of the Brophy Cable Camper Jacks. The jack is very stable because of the tripod base. That stability will make the jack very difficult to tip to the front or the back.…

...I need a replacement landing gear jack for the Ground Control® 3.0 Automatic 5th Wheel RV Leveling System. I have a 2021 GD Reflection 303RLS and I need to verify that I need the 30 jack, not the 32...

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…

...where do I find the model for the leveling system I have?. I have a 2002 holiday ramble septer. 40ft. It has the power gear system. Rear left jack is leaking. thank you...

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…

The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…

Hey Ty, what size hitch do you have and how much of an extension do you need? The Curt extension part #C45048 that you referenced fits a 2-1/2 inch hitch and provides a 24 to 36 inch extension.

The replacement landing gear motor you referenced, Stromberg Carlson #LG-142178, is a widely compatible replacement motor that will work with most major brands of 5th wheel landing gear, including Stromberg Carlson, Lippert, Venture and Atwood. These…

...I have class a monaco knight 40pdq 2006 I need to replace the front leveler The old one is power gear 18,000 Pound I dont know the parts number Can you please tell me what the replacement I need...

You should not have a problem with the camper sliding out when you are using any of the Brophy Cable Camper Jacks. The jack is very stable because of the tripod base. That stability will make the jack very difficult to tip to the front or the back.…

...I need a replacement landing gear jack for the Ground Control® 3.0 Automatic 5th Wheel RV Leveling System. I have a 2021 GD Reflection 303RLS and I need to verify that I need the 30 jack, not the 32...