1. Camper Jacks
  2. Ultra-Fab Products
  3. A-Frame Jack
  4. 3001 - 4000 lbs
  5. Electric Jack
  6. 18 Inch Lift
Ultra-Fab Electric A-Frame Jack - 18" Lift - 3,500 lbs

Ultra-Fab Electric A-Frame Jack - 18" Lift - 3,500 lbs

Item # UF38-944017
lowest price pledge
Retail:$284.99
Our Price: $205.50
You Save: $79.49
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Easy-to-use jack has fast 12V motor for quick, simple lifting. Corrosion-resistant, die-cast aluminum cap and hardened steel gears make for a long-lasting jack. Extends 6" in 25.3 seconds with 1,000 lbs of tongue weight. Call 800-298-1624 to order Ultra-Fab Products camper jacks part number UF38-944017 or order online at etrailer.com. Free expert support on all Ultra-Fab Products products. Guaranteed Lowest Price and Fastest Shipping for Ultra-Fab Electric A-Frame Jack - 18" Lift - 3,500 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (229)
  • Q & A (101)
  • Photos
  • Why etrailer?

Ultra-Fab Products Camper Jacks - UF38-944017

  • A-Frame Jack
  • 3001 - 4000 lbs
  • Electric Jack
  • 18 Inch Lift
  • Bolt-On
  • Weld-On
  • Ultra-Fab Products
  • 1 Jack
  • 2 Inch

Easy-to-use jack has fast 12V motor for quick, simple lifting. Corrosion-resistant, die-cast aluminum cap and hardened steel gears make for a long-lasting jack. Extends 6" in 25.3 seconds with 1,000 lbs of tongue weight.


Features:

  • Tongue jack positions quickly and easily
  • 12V Motor powers jack, eliminating need for hand cranking
    • Built-in, water-resistant toggle switch for easy operation
    • Integrated circuit breaker prevents motor damage
    • All-steel gears are strong and durable
  • Dual side lights make it simple to set up your camper at night
  • Emergency, ratchet-style crank socket
    • 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend
  • Zerk fitting on the lower stem assembly allows access to grease the threaded rod which leads to a longer jack life
  • Easy bolt-on or weld-on installation for A-frame trailers
    • Hardware not included
    • Mounting holes fit 2" or 2-1/4" spacing
  • Round, removable footplate included
  • Die-cast aluminum cap resists corrosion
  • Sturdy steel construction with black powder coat finish


Specs:

  • Bracket height:
    • 9-1/4" Retracted
    • 27-1/4" Extended
  • Lift: 18"
  • Travel speed (w/ 1,000-lb tongue weight):
    • Extends 6" in 25.3 seconds
    • Retracts 6" in 23.7 seconds
  • Lift capacity: 3,500 lbs
  • Outer tube diameter: 2"
  • Inner tube diameter: 1-3/4"
  • Footplate diameter: 6"
  • Distance between mounting holes center to center: 3"
  • 5-Year warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



38-944017 UltraFab Tongue Jack - Model 3502 - 18" Lift - 3,500 lbs

Installation Details UF38-944017 Installation instructions




Customer Reviews

Ultra-Fab Electric A-Frame Jack - 18" Lift - 3,500 lbs - UF38-944017

Average Customer Rating:  4.7 out of 5 stars   (229 Customer Reviews)

Easy-to-use jack has fast 12V motor for quick, simple lifting. Corrosion-resistant, die-cast aluminum cap and hardened steel gears make for a long-lasting jack. Extends 6" in 25.3 seconds with 1,000 lbs of tongue weight.

- UF38-944017
by:

Easy to install. I also replaced bolts with grade 8 bolts. Ultra fab is a good product.



- UF38-944017
by:

The fit was flawless and it handles my Flagstaff Mac with ease. It is a pop-up and not a huge load, but it saves a 70 yr. old a lot of cranking. Install was a breeze. Love it when items are as described. 6 day delivery over a holiday long week-end. Thanks for the great service.



- UF38-944017
by:

The jack worked for two weeks, now it only goes down.


Comments
Thank you for the review! Our customer service team should be reaching out to you in the near future.
-- Etrailer Expert Brooke M - 09/23/2021


- UF38-944017
by:

Easy install in 5 minutes, works great, excellent customer service, fast service and shipping. No more hand cranking for me.


Comments
Works great, fast and easy, my friend bought one from you after he saw mine
Doug W - 08/03/2018



- UF38-944017
by:

etrailer had the best price. Shipped to me in a few days. Took about 1 hour to convert from the 4th bad liepert smart jack. Works fast and easy. As I read on other reviews it is "wobbly" side to side compared to the old jack but rating are equal. Put on my enclosed ATC car trailer. Have not yet loaded the car - I think that should only be done when "hooked up". Check with me in a few months after I have used it a bunch.


Comments
doing fine
David - 02/19/2020



- UF38-944017
by:

Installs easily, works great. Be careful to shut off the up/down switch as soon as the jack reaches the end of its travel, otherwise you will blow a fuse.


Comments
Wonderful. Easy for the grandson to blow the fuse, but that is why the fuse is there.
Dick W - 07/26/2020


- UF38-944017
by:

Nice jack. Easy to install.



- UF38-944017
by:

Well I guess its been a year since purchasing the Ultra-Fab Electric A-Frame Jack as per the email I received from etrailer. I have been very happy with the purchase, this is so much better than cranking a handle!! Installation was very easy too. I liked this one since it has a zerk fitting for lubing the jack where others didn't seem to have that. All in all, I would purchase this jack again and through etrailer.com too.



- UF38-944017
by:

This unit was purchased to replace an UltraFab that I bought in 2007; that would mean my first unit lasted over 12 years. The old unit was still running, but the motor had a couple of dead spots and I got tired of bumping it to get it moving. I consider anything electrical that sits outside for this long, and still technically works, pretty decent quality. The new unit looks very similar to the old one, except the lights are now LED and there is a grease hole on the shaft. The addition of a grease point is great because my old unit could not be easily greased (thus, never was). This should extend the life of the new unit. Installation was easy, except the unit would not power up reliably. The issue appears to be the fuse holder supplied with the kit. The fuse was too loose in the holder and the power connection was weak. To solve the problem (I hope) I took the fuse holder apart and stretched the internal spring. This seemed to fix the problem. I hope this unit gives me the service my last one did. I bet it will.



- UF38-944017
by:

Great jack - haven't hooked up the electronics, but it's been great. The little rubber cover over the manual jack nut drive cracked, but I assume that is because I keep using it repeatedly (more than it was designed for). I wish it had a zerk fitting or two on the jack tube, just to keep it from seizing up in the future.



- UF38-944017
by:

We are very pleased with the lift we purchased. The first one we bought didn't fit our camper, we didn't realize that the trailer hitch has 2 different sizes for the lift shank to go thru. Etrailer was very helpful in reordering the correct lift and the return of the first one.



- UF38-944017
by:

Great product, was easy to install and wire up. Very durable, grease tip location on the tube very convenient. Cons ( would like to see a foot extension for the tube and a more durable cover for the grease tip, other than that its a thumps up for this product.



- UF38-944017
by:

Extremely easy to install. Heavier material and better made than the tongue jack that came on my trailer. So far very happy with the product and think it will be easy to operate when traveling. Shipping was to be in 5 days and received product in two days. Great! Cover for the jack seems to be well constructed with a draw string closure. Will buy from this company again in the future and will recommend them to my camping friends and family. Great customer service and friendly person on the phone.



- UF38-944017
by:

Mechanical installation was very easy. Removed the three 9/16 bolts from the existing crank and installed the new one. The hardest part was the electrical connection. The new jack had 10 gauge wire and the trailers wiring was 16 gauge at best. Very happy with this purchase and would recommend it to others!



- UF38-944017
by:

Low price but high quality. Works faster than most Jack's out there. My only concern is the length of the shaft. I need to use a 6 inch block under it. Works great. I now have 2 of them. One on my enclosed cargo trailer and one on my 26 ft travel trailer. Highly recommend. It



- UF38-944017
by:

I have ordered items from etrailer before and have never had a problem with this company. They follow up on your orders and answer any questions you have. I just purchased this tongue jack and got it in three days. This is a well built jack and works fine,although it is a little noisy it performs well. It is weather proof and has lights on both sides. I have had one just like this for years and worked fine. Just did not do maintenance on it like I should have, but will do it now. I would recommend this to anyone.



- UF38-944017
by:

The service from etrailer was beyond excellent. They didn't have the jack I ordered in stock but made every effort to find one. When that wasn't possible they were on the phone with me that evening setting up a replacement. I received the jack a full day before they said I would. Installation was easy and went well. I did add a ground wire from the base of the jack to the trailer ground for insurance purposes.



- UF38-944017
by:

I purchased the Ultra Fab because the original Ultra Fab Jack on my travel trailer is 12 yrs old. I got free shipping from etrailer with standard shipping. I received my tongue Jack in 3 days.You'd think I got expedited fast shipping.! I am very pleased with my purchase and will continue to be a e trailer customer.!



- UF38-944017
by:

I received your product in tack. Installed the tongue jack and it worked fine as it was claimed it would . Have not taken it out on a run yet. I'm going to Red River, NM. this week 5-21-2018. Will be out having fun in the out doors. If the jack preforms well you will see a five star rating. Thanks for the videos that made the change from my tongue jack to yours. Helpful.



- UF38-944017
by:

Electric lift for tongue of my travel trailer is working beautifully . No more cranking. No more sweat. Love the product and the great customer service. Bob B in California



- UF38-944017
by:

Received as stated, very easy hook up, works great, hope the longevity is as good, did not need the fuse connection as camper already has 30AMP FUSE.


Comments
Works really good, One problem if you lower all the way a fuse will blow, I can live with that.
Lawrence - 03/30/2019



- UF38-944017
by:

This product I have mounted on the front of a 24' race car trailer. I has a lot of tongue weight and works great.



- UF38-944017
by:

The Ultra-Fab power jack is great so far. This was a direct replacement for the stock original jack. Easy to install. This one has a fuse in-line as the original jack did not. I like that feature.


Comments
AOK
Johnny C - 03/31/2016



- UF38-944017
by:

Great service--Received within 2 days of ordering. Installed easily and wired all within an hour. So far works great! Will follow-up next year after a season of use!


Comments
Made it thru the winter and hooked batteries up this spring and worked perfect! No more stuggling with the hand crank Excellent product!
Mike - 06/22/2020


- UF38-944017
by:

This electric jack works spuractically. Not very happy with it. Also the round base where it mounts to the trailer is not made very well. Not heavy enough steel.


25
230
Show More Reviews

Ask the Experts about this Ultra-Fab Products Camper Jacks

  • Troubleshooting Ultra-Fab Electric Jack Model 3502
    There are a few things that could be the issue with your Ultra-Fab electric tongue jack 3502 # UF38-944017. The switch, the motor, the threaded rod or the gears could have gone bad. There is also an auto-reset circuit breaker and a 30-amp slow blow fuse. To determine the issue, I first recommend manually trying to operate it using the 9/16 inch socket. If you can raise and lower the jack, we know the mechanical components of threaded rod and gears work. If not, then it is time...
    view full answer...
  • Replacement Slow Blow Fuse for Ultra-Fab Electric A-Frame Jack 3502 Model
    The correct replacement slow blow fuse for the Ultra-Fab Electric A-Frame Jack (3502 Model) part # UF38-944017 is the Replacement 30-Amp Slow Blow Fuse part # UF38-751034. Some other parts you may want to keep on hand are the Replacement 20-Amp Auto-Reset Circuit Breaker part # UF38-101238 and the Replacement Toggle Motor Switch part # UF38-75-1037.
    view full answer...
  • Is There a Replacement Circuit Breaker Available for the Ultra-Fab UF38-944017 Jack?
    We do indeed have replacement 20-Amp circuit breakers, like the Pollak Circuit Breaker - Cycling/Automatic Reset - 20 Amp - Straight Mount Bracket # PK54520, but the Auto-Reset Circuit Breaker for Ultra-Fab 3,500-lb Electric A-Frame Jack UF38-101238 is no longer available, unfortunately. Though this will not be a direct replacement available from Ultra-Fab, it will definitely work with your # UF38-944017.
    view full answer...
  • Recommended Power A-Frame Jack For Travel Trailer With 770lb Tongue Weight Rating
    For your travel trailer with 770lbs tongue weight and a weight distribution hitch being towed by your 2007 Dodge Ram I recommend the Electric Jack w/ Footplate - A-Frame - 25-1/2" Lift - 3.5K - Black # e49ZR. This jack fits the industry standard A-Frame jack mounting point and its 3500lb capacity will be plenty for the tongue weight of your trailer, and will be able to jack up the trailer once connected to the weight distribution shank of your system to allow you to more easily install...
    view full answer...
  • Recommended Electric Tongue Jack for Forest River V-Cross Travel Trailer
    I recommend looking at the Ultra-Fab Electric A-Frame Jack # UF38-944017, which has an 18 inch lift and is rated for tongue weights up to 3,500 lbs, more than enough for your Forest River's 900 lb tongue weight. This jack features a 12V motor with a toggle switch as well as an integrated circuit breaker. The Ultra-Fab's mounting holes will fit 2 inch or 2-1/4 inch spacing and it even has dual side lights for nighttime use. I have included a link to a video review of this jack for you...
    view full answer...
  • Recommended Electric Trailer Jack for 20 Foot 5,000lb V-Nose Trailer
    Even though I can't tell you the weight limit on your current jack, for your combined total weight of your trailer's contents I recommend the 3,500lbs Ultra-Fab, part # UF38-944017. I have linked a video of the jack for your convenience.
    view full answer...
  • Replacement Powered Jack Recommendation for Keystone Springdale with Broken Jack
    Since nearly all A-frame trailer jacks don't have replacement motors your best option will be to replace the entire jack. The LIppert # LC643589 Smart Jack is a good choice. It has all the features of other powered tongue jacks but also can be set to remember the uncoupled height and hitched height. No more cranking and waiting for the jack to get to the right height. I have included some demo links.
    view full answer...
  • Troubleshooting Ultra-Fab Electric A-Frame Jack
    The Ultra-Fab Electric A-Frame Jack # UF38-944017 shouldn't blow a fuse from retracting too far. The fact that you can't use the manual crank to free up the jack shows that something internally has been damaged. This should fall under your warranty because this came with a 2 year manufacturer warranty that 6 time use should fall well within.
    view full answer...
  • How to Determine Weight Capacity of Electric Trailer Tongue Jack for Camper
    You'll need to chose a jack whose capacity is greater than the fully loaded and ready to tow tongue weight of the camper. Going with a powered jack whose capacity is much greater than the tongue weight of the camper is recommended because the jack won't need to work so hard and will therefore last longer. Also, if you're using a weight distribution system on the camper, sometimes you'll want to use the trailer jack to also pick up the rear of the vehicle to put slack into the system so...
    view full answer...
  • Troubleshooting a Ultra Fab Jack part # UF38-944017 that Stopped Working
    It sounds like the motor of the Ultra Fab Jack part # UF38-944017 has gone out, which is unfortunate since the motor is not replaceable. There is a chance that the problem is the switch though. Which the replacement switch is part # UF38-75-1037 which would be an easy thing to try before having to replace the entire jack.
    view full answer...
  • Manual Crank Option for Ultra Fab Electric A-Frame Jack on Airstream Bambi
    The Ultra-Fab Electric A-Frame Jack - 18" Lift - 3,500 lbs # UF38-944017 simply uses a 9/16" deep well socket to operate. They don't offer a manual hand crank for this, so you will need to supply your own tools. Rotate clockwise to retract and counter-clockwise to extend the jack.
    view full answer...
  • Replacement Shear Pin for Ultra-Fab Ultra 3502 Powered Tongue Jack
    Powered trailer jacks allow use of a manual crank for emergency purposes (like a power loss) and some can be used with a drill attachment and a cordless drill. But an impact wrench puts too much stress into the mechanism and this type of tool should not be used on a jack. We do offer a replacement shear pin # UF38-751025 that fit jack model Ultra 3502 for serial numbers up to 010150 (which were made before 2010). My tech contact at Ultra-Fab thinks the self re-setting circuit breaker...
    view full answer...
  • Where Does the In Line Fuse Holder Get Installed on Ultra-Fab Electric A-Frame Trailer Jack
    On the Ultra-Fab trailer jack # UF38-944017 the in line fuse holder will be cut in half and spliced in along the power wire. Ultra-Fab makes the following statement: The Fuse Holder can be installed by means of either crimping or soldering the connections. For convenience the Fuse Holder should be installed near the power source. Cut red wire in half, connect one end to the end of the black wire from the jack and connect the other end of the red wire to the positive post of the battery.
    view full answer...
    Image 1 for
  • Barker Manufacturing VIP 3000 Jack Will Retract but Not Extend
    The most likely cause of the issues you are having with your Barker Manufacturing VIP 3000 Jack is going to be either a poor power source or bad ground. I recommend you check to make sure you have a full 12 volts going into the jack. If so then I would reground the jack after sanding down the surface or reattaching the ground wire. If you don't have 12 volts on the power wire then make sure the battery is fully charged and there are no breaks in the wire. The jack would still retract but...
    view full answer...
  • Replacement Motor for Ultra-Fab Electric A-Frame Jack 38-751040
    I spoke with Ultra-Fab and they said if the jack was made before 2015 then there are no replacement motors available. The serial number on your jack starts with 12 which means it was made in 2012 therefore, your only option is to replace the entire jack. The upgraded model is the Ultra-Fab Electric A-Frame Jack part # UF38-944017 which has brighter LED lights, an external ground wire for more dependability, and a more secure cover for better protection from the elements.
    view full answer...
    Image 1 for
  • Does the 20 Amp Circuit Breaker for Ultra-Fab Powered Trailer Jacks Reset Itself
    Once an overload condition has ceased then the circuit breaker should reset itself. It is mounted on the outside of jack # UF38-944017 but should not need any persuasion to reset. If the jack is not powering on it could be that an overload or short still exists or something else in the electrical system from the power source to the jack is not working properly. You will also need to check the in line fuse. If it is blown the jack will not operate. If all the wiring is done correctly...
    view full answer...
  • Repair Parts for Over-Extended Ultra-Fab # UF38-944017 Powered Tongue Jack That Won't Retract
    If your Ultra-Fab # UF38-944017 Powered Trailer Tongue Jack's motor still operates but the jack leg does not retract then odds are that one or more gear components in the jack are damaged. The motor itself is probably okay. We do offer a range of repair/replacement parts for this jack. I have linked a diagram showing an exploded view along with a parts listing. In some cases the jack may not be repairable, depending on the exact damage to it. You can inspect the gearing components in...
    view full answer...
    Image 1 for
  • Can a Caster Wheel be Used on Ultra-Fab Electric A-Frame Trailer Jack
    While you could put a wheel on an electric jack such as # UF38-944017 the problem is that the wheels are rated much lower than the jacks so the jack would be limited to the capacity of the wheel. What I recommend is to use a trailer dolly such as # MT70225. We use these around here sometimes to move trailers around. The 1-7/8 inch ball ensures that any coupler size will fit (doesn't have to be exact because the trailer isn't being towed). Another option is a jack and trailer mover in...
    view full answer...
  • Connecting a Power Lead From an Electric A-Frame Jack to Trailer Accessory Battery
    If you are using an internally grounded electric jack like the Ultra-Fab Electric A-Frame Jack, part # UF38-944017, you simply run the power lead to the accessory battery on the trailer and connect it to the positive terminal using something like a ring terminal, like part # DW05705-1. You will also want to make sure the negative post of the battery is grounded to the trailer frame so the circuit is complete. This type of jack will only require the power lead wire to be connected as...
    view full answer...
  • Does Ultra-Fab Powered A-Frame Trailer Jack have a Manual Crank
    There isn't a hand crank for Ultra-Fab trailer jack # UF38-944017 but instead it uses a 9/16 inch deep well socket that you could use with a ratchet to manually crank the jack should you need to. I have included a link to a video review of this jack for you.
    view full answer...
  • Electric Tongue Jack Recommendation for A-Frame Trailer with 2-1/4 Inch Mounting Hole
    To answer your question, no, you do not have to use a jack with an outer tube dimension of 2-1/4 inches. An electric jack like the Ultra-Fab Electric A-Frame Jack, # UF38-944017, with a 2 inch outer tube diameter can be mounted on your travel trailer even though the jack mounting hole is 2-1/4 inches in diameter. When it comes to installing the jack, the mounting flange was designed with slotted bolt holes to allow for installation on an a-frame trailer with a 2 inch or 2-1/4 inch opening....
    view full answer...
  • Power Source Options For Electric Trailer Jack # UF38-944017
    The Ultra-Fab Electric A-Frame Jack, part # UF38-944017, requires a 12V power source. You have a couple of options for getting power to the power jack. You can use a quick connect like part # DL24086, and run a wire from the towing vehicle battery, which would enable you to unplug the connector when you are not towing the trailer. The other option for wiring is to attach the power jack wiring to the trailer mounted battery. The power trailer jack has an internal ground, so you will...
    view full answer...
  • Recommended Replacement Trailer Battery for Powering Ultra-Fab Electric Tongue Jack UF38-944017
    To power an electric trailer jack (or a winch for that matter) generally the higher the amperage rating of the battery the better. Jacks, like winches, use more power to operate as the load increases. The Ultra-Fab Electric A-Frame Jack # UF38-944017 can be powered by any full-size 12V battery (but not a smaller one such as that on a lawn mower). My contact at Ultra-Fab recommended you ask for a Series 31 type battery at your local store. These are a hybrid type that are not rated...
    view full answer...
  • Availability of Spare Parts for Ultra-Fab # UF38-944017 Powered Trailer Tongue Jack
    If you look at the provided photo, you can see an exploded diagram of the Ultra-Fab # UF38-944017 powered jack you mentioned. If you would reply with the number of the part you need, I would be happy to check availability for you.
    view full answer...
    Image 1 for
  • How to Grease the Ultra-Fab Electric A-Frame Jack # UF38-944017
    Base on the installation instructions, to grease the jackscrew on the Ultra-Fab Electric A-Frame Jack, # UF38-944017, extend the jack until the grease fitting is aligned with the hole in the outer tube. You can apply enough grease with two pumps from a standard grease gun. To grease the gears, you will need to first remove the fuse from the fuse holder. Next, remove the gear cover via 4 phillips screws to expose the gears. Then, grease the gears using chassis lube and reinstall the...
    view full answer...
  • Troubleshooting Powered Trailer Jack that Doesn't Always Power Up and Down
    Make sure the main ground wire on your trailer harness is connected to a clean metal surface of your trailer frame. It sounds like your jack has a weak ground and because of that it doesn't want to operate consistently. By improving the ground of your trailer harness the jack should start to function normally again.
    view full answer...
  • Replacement Light And Toggle Switch For Ultra-Fab Electric Jack.
    If your jack is an Ultra-Fab 3500 Series jack, then unfortunately the jack light is not a replacement part available. However, the replacement Toggle ON/OFF Motor Switch, part # UF38-75-1037 is designed for Ultra-Fab # UF38-944014, # UF38-944016, and # UF38-944017 jacks.
    view full answer...
  • Powered A-Frame Jack Recommendation for Starcraft Autumn Ridge Outfitter 2018 Model 19BH
    I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of tongue weight. This is 1000 pounds more than other models, and even though you may not need this much capacity, you will find that the jack motor runs quick and effortlessly. This will add years to its life. This jack also has a unique clutch that prevents damage from over extending or retracting the jack foot - the most common reason for jack failure. I also like that...
    view full answer...
  • Ultra-Fab Electric A-Frame Jack Wont Extend But Retracts
    It sounds like the issue is in the switch or the wiring of your Ultra-Fab Electric A-Frame Jack - 18" Lift - 3,500 lbs # UF38-944017. Since it retracts, we know the motor is working in one direction. These motors have a polarity so power on one wire runs the motor in one direction and power in on the other wire runs the motor in the other direction. I suggest removing the switch and connecting the wires manually to power individually. It it extends, the switch is bad. If not, the wiring...
    view full answer...
  • Electric Jack Recommendation For 30 ft 2013 Forest River Trailer
    The Ultra-Fab Electric A-Frame Jack, part # UF38-944017 you referenced would certainly work for your trailer based on the tongue weight you furnished. This jack does have a weight capacity of 3500 lbs, and has an 18 inch lift. it can be bolted on or welded to the trailer, and hardware is not included. Another option I recommend is the Stromberg Carlson Electric A-Frame Tongue Jack, part # JET-2500. It has a weight capacity of 2500 lbs, which is still well within the range you need for...
    view full answer...

Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Shane T
Installed by:
Shane T
Employee Randy B
Installed by:
Randy B
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Halie H
Updated by:
Halie H
Employee Mike S
Updated by:
Mike S
Employee Matthew E
Updated by:
Matthew E
Employee Noah M
Updated by:
Noah M
Employee Eric H
Updated by:
Eric H
Employee Sue W
Video by:
Sue W
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.