Dodge Gooseneck Hitch

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Justin, so I checked with B and W and they only have fits that run up to 2024 BUT since we know they 2024 and 2025 trucks are unchanged in terms of gooseneck hitches we know the Turnoverball part #BWGNRK1020 is a fit and will work great.

Hello Nick, The Hitch ball for the Curt #C60642 will sit above or slightly forward of the rear truck axle. I attached 2 pictures of the underbody of the 2022 GMC Sierra, as you can see that the Curt #C60642 sits in the same spot as the B&W…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

Yes, we do. What you are describing sounds like the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch item #RP27FR. I have attached a picture below. These come welded to the frame exactly where you…

To add a gooseneck hitch to your 2024 GMC Sierra 2500 with a 6-3/4' bed, I recommend the B&W Custom Underbed Installation Kit item #BWGNRK1020. It has a massive 30,000 lbs capacity and fits both the 6-3/4' and 8' bed lengths. The…

To add a gooseneck hitch to your 2024 Ford F-350, I recommend the B&W Turnoverball Underbed Gooseneck Hitch item #BW73FR. This hitch is custom fit and includes all hardware necessary to complete installation on your truck. It has a massive 30,000…

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

Good morning, Ron! The Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AN67VR is compatible with your factory gooseneck hitch ball just as it is. The Adapter #AN27VR you're looking at just gives you a better connection than the…