Customers compare RP39FR to these similar products
Products Featured in this Video
Hi there, Ford owners. Today on your 2019 Ford F350 Super Duty, we're gonna be taking a look at and showing you how to install Reese's underbed factory style puck system. And this is what our underbed factory style puck system hitch from Reese looks like when it's installed. You can see here that you get your center hole for your gooseneck ball, as well as your four exterior holes for dropping in… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Videos
Help Articles
Expert Answers
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...I believe you're talking about what Reese refers to as inner brackets because they mount to the inner surface of the truck frame. They offer the inner brackets as #RP27FR, as shown in the provided photo.
view full answer...Yes, we do. What you are describing sounds like the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch item #RP27FR. I have attached a picture below. These come welded to the frame exactly where you…
view full answer...If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck hitch.…
view full answer...When installing the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1116 on a 2019 Ford F-250, you will need to drill the hitch ball hole 45-1/2" back from the edge of the bed. This may or may not line up perfectly with the…
view full answer...On the Curt Q25 5th Wheel Trailer Hitch, #C16265 and previous question that references O-ring size. The needed diameter is 31.5 mm, for thickness, an O-ring of about 2 or 3mm is sufficient. Its exact thickness is not crucial as it is not required for…
view full answer...While the best and most certain way to tell if your 2018 Ford F-250 has the puck system is to call your local Ford dealer with your VIN, it should be pretty easy to tell otherwise. If your bed looks like the accompanying photo - with four accessible…
view full answer...The two parts you mentioned (#RP87FR and #RP39FR) that fit your 2021 Ford F-350 Super Duty will both allow the ability to pull a gooseneck trailer with a gooseneck ball or use a 5th wheel hitch in the puck system. The only difference between them is…
view full answer...The OEM "prep" package just refers to already having 4 puck style mounting points and a gooseneck hitch already installed in your truck, so if you don't already have one then you will want to select the choice for a 2017 Ford F-350…
view full answer...Great question! Although a 5th wheel hitch rated for 20K can tow up to 20K we highly recommend using a 5th wheel hitch that is rated about 1K - 2K over the GVWR of your 5th wheel trailer. This gives you a safety margin and will help keep your hitch…
view full answer...The two parts you mentioned are both the same Reese Elite Series Under-Bed Rail and Installation Kit that fit your 2021 Ford F-350 Super Duty, giving you the ability to pull a gooseneck trailer with a gooseneck ball or use a 5th wheel hitch in the…
view full answer...The Reese Elite Under-Bed 5th Wheel Rail and Install Kit #RP87FR and #RP39FR you were looking at for your 2021 Ford F-350 are actually both the exact same kit. The reason for two different kits is one is listed under the 5th wheel hitch section of…
view full answer...