Refresh your side markers with amber rectangle trailer lights that suit front and side clearance positions and make matching common cutouts straightforward. Choose LED styles for bright output and low current draw, and pick one-wire lights that ground through the mount or two-wire versions with a dedicated ground. Measure your housing and mounting-hole spacing to confirm a clean swap.
Yes, LED amber rectangle lights are described as very bright and straightforward to install. Check if yours has a dedicated ground wire or grounds through the mounting hardware to match your wiring. Plan your connections—some lights have short leads, so having extra wire and good connectors helps.
Yes, there are submersible amber rectangle options. Look for lights labeled submersible and sealed to handle immersion. Verify the bracket or grommet style you need and match the wiring to your trailer. If upgrading from non-submersible lights, confirm the new light's size and mounting pattern before drilling.
Some can, but not all. Many amber rectangle lights are clearance/side marker only with two wires for power and ground. Look for a multifunction light that blinks for turns and be ready for minor rewiring if your original markers didn't flash. If you only see two wires and no signal lead, it won't indicate turns.
Match the light's overall size and mounting hole spacing to your trailer's existing holes. Confirm if your current light is fender-mount or side marker and choose the same style. If your old light shows SAE codes, use them only as a guide and verify the dimensions instead.
It can, if the one-wire light is designed to ground through the mounting hardware. If you want to use your existing ground wire, choose a two-wire version with a dedicated ground. In salty or wet environments, a dedicated ground wire inside the trailer can help minimize corrosion issues.
Clearance Lights
Reflectors
Tail Lights
Trailer Lights Parts or Accessories
Filters
