This rectangular LED clearance or side marker light gives you strong visibility without draining your system. The 2 amber LEDs shine through a clear lens, giving a clean, bright look that stands out day or night. With just 0.05 to 0.07 amps of draw at 12.8V, it’s efficient and reliable for any setup that needs consistent lighting without overloading the circuit.
Moisture is no match for this light. The housing and lens are sonically sealed into one solid unit, keeping water out even when submerged. Whether you’re driving through rain or backing into the ramp, the sealed design protects the LEDs and circuitry from corrosion or shorting, so your light stays clear and dependable.
Mounting this light is straightforward thanks to its surface-mount design and 3" center-to-center hole spacing. It’s compact at just 3-11/16" long, 13/16" wide, and 3/4" thick, so it fits neatly without sticking out or snagging on anything. The 9" self-grounding pigtail connector makes wiring easy with no extra ground wire needed.
Designed for flexible use, this light meets DOT standards and can be P2 rated or PC rated depending on how it’s mounted. Mounted vertically, it delivers a focused 90° beam for clearance or side marking. Mounted horizontally, it spreads light across 180°, doubling as both a side marker and clearance light for better all-around visibility.
Built with durable polycarbonate housing and lens, this LED light is made to last about 50 times longer than incandescent bulbs. No filaments to break, no bulbs to replace—just steady output every time you switch it on. And with a lifetime warranty on the LEDs, it’s a reliable lighting solution that keeps working season after season.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors, Steven here with etrailer.com. Today we're lookin' at our LED trailer clearance or side marker light. It's submersible with two amber diodes and a clear lens housing. So folks, again, this is a nice rectangular LED mini trailer light that functions as both a clearance or side marker light when properly mounted. It's been sonically sealed, so it's gonna be waterproof and submersible. You can see this side here has the grounding plate already installed on it as well.
So when you put your screw through, or bolt, to install this in the trailer, it's going to get it to ground that way. And then the nine-inch lead here in yellow, you'll mount to or connect to the positive connector. It is DOT compliant, it's P-2 rated when it's mounted vertically, and PC rated when it's mounted horizontally. I'll throw some dimensions up on it while I'm gettin' my wiring. Now what we're gonna do is we're gonna light this up for you, that way you can see it in action.
And again, it's usin' 12-volt system. All right, so we're gonna go ahead and light this up for you. So there we've got Amber in the daytime, and let's turn off the overhead lights. And here we are in the dark. And I'll flash it a little bit here just by unpluggin' and pluggin' in my thing, just so you kinda get an idea of your eye relief and whatnot.
So very nice little light here. LEDs, as you know, are very bright, they're longer-lasting like I mentioned, They're just gonna give you an overall better performance, in my opinion, for the longevity of your trailer, and thus meaning less maintenance for you to have to worry about. The lenses is a durable polycarbonate housing and lens, so it's not gonna bust too easily on ya as far as bumpin' into things or whatnot. There's a lifetime warranty on the LEDs from the manufacturer, and it's two diodes, and at 12-volts it has a power draw of 0.5, or, I'm sorry, 0.05 to 0.07 amps. Well, that's gonna wrap it up for our quick look today, folks.
I'm Steven, thanks for watchin'.
Ratings & Reviews
Great deal with fast shipping
Fit and finish was great, these replaced some running lights on a cargo trailer. Fast shipping as usual from etrailer.
What was needed
The lights were easy to order and arrived on time. I have already installed them and they look great.
The lights where a perfect replacement! !!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.