Trailer ID Light Bar with 14-1/2" Hole Centers
Updated 09/17/2026 | Published 09/12/2026
Products Featured in This Question
Question:
Can you help advised which product will fit my need. I have a trailer that needs an identification bar but the hole to hole size needs to be 14 1/2 inches. I tried to look it up on the website but no sizes are shown. Please let me know which id trailer bar will fit my trailer...thanks
asked by: Stephen L
Expert Reply:
Thanks for letting us help Stephen. The TecNiq ID Light Bar # TN25TR has mounting holes spaced 8-1/2" apart on center, so unfortunately, it won't work for the mounting dimensions you provided.
I looked through the ID light bars we carry and found several options with 14-1/2-inch mounting hole spacing that should be a much better match:
Red Identification Light Bar with White LED Utility Light # OPT88FR
TecNiq Low Profile Over 80" ID Bar # TN62TR
TecNiq Low Profile ID Bar Light # TN94TR
What type of trailer are you installing the ID light bar on?
Product Page this Question was Asked From
TecNiq Tri Bar Heavy Duty ID Bar - 14.5" - Red Lens
- Trailer Lights
- Clearance Lights
- Marker
- Light Bar
- Surface Mount
- LED Light
- 14-1/2L x 1-1/2W Inch
- Red
- TecNiq
more information >
Continue Researching
- Article: Trailer Lighting Requirements
- Q&A: Replacement For Dexstar 15 Inch Wheels 017-232
- Q&A: How to Measure a Trailer Wheel Pilot Hole to Choose a Replacement Center Cap
- Article: Trailer Wiring Diagrams
- Q&A: Replacement for TDE LP85 Surge Brake Actuator
- Q&A: Longer Hitch Pin Recommendation for Toyota Sequoia Trailer Hitch
- Q&A: How to Properly Ground Trailer Marker and Taillights
- Q&A: What Size Hole to Mount Optronics 6-1/2 Inch Oval Taillight # STL22CCRB
- Q&A: If Trailer Manufacturer Recommends Load Range C Tires Can Load Range E Tires Be Added to Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller Installation: Starting from Scratch
Stephen L.
9/16/2026
I am replacing one on my steel mesh utility trailer. I have a simple one like Part Number: 428000 with the white but im looking for one that will be able to fit my screw holes already in the steel plate at 14 1/2 inches apart. Do you guys have something like that close to the screw hole length?