bing tracking image
  1. Trailer Lights
  2. Peterson
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Amber
  7. Red
LED Trailer Fender Light - 2 Diodes - Amber and Red Lens

LED Trailer Fender Light - 2 Diodes - Amber and Red Lens

Item # PE89BR
Our Price: $11.90
You Save: 56%
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.06 lbs
In Stock
Peterson Tail Lights - PE89BR
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
3-7/8" x 1-1/4" Rectangle. Trailer fender light functions as both amber front clearance and red rear clearance light. Hard-wired terminals are potted with polyurethane. Surface mounts with bracket (sold separately). Accepts 2-prong plug. Great Prices for the best trailer lights from Peterson. LED Trailer Fender Light - 2 Diodes - Amber and Red Lens part number PE89BR can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (38)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Peterson Trailer Lights - PE89BR

  • Tail Lights
  • Rectangle
  • LED Light
  • Amber
  • Red
  • 3-7/8L x 1-1/4W Inch
  • Surface Mount
  • Rear Clearance
  • Side Marker
  • Non-Submersible Lights
  • Peterson

3-7/8" x 1-1/4" Rectangle. Trailer fender light functions as both amber front clearance and red rear clearance light. Hard-wired terminals are potted with polyurethane. Surface mounts with bracket (sold separately). Accepts 2-prong plug.


  • Dual-face LED trailer light functions as both amber front clearance and red rear clearance light
    • Great for boat, cargo, and horse trailers
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable polycarbonate base with acrylic lens
  • Amber and red lenses with amber and red LEDs
  • Compatible with 12V DC systems
  • Mounts on surface of trailer fender with bracket (sold separately) - hardware not included
    • Designed for top or side placement at widest point of trailer
  • Accepts industry standard 2-prong plug
  • P2 rated light produces a 90-degree beam pattern
  • DOT compliant


  • Overall dimensions: 3-7/8" long x 1-1/4" tall x 7/8" deep
  • Bolt hole radius: 3-1/16"
  • Diodes: 2
  • Power draw at 12V: 0.08 amps
  • Limited lifetime warranty

Peterson 161A-R LED Combination Marker Light Dimensions

P2-Rated Lights

A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.

Surface-Mount Light

Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.

M161A-R Peterson LED Fender Light for Trailers - 2 Diodes - Amber and Red

Video of LED Trailer Fender Light - 2 Diodes - Amber and Red Lens

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Review of Peterson Trailer Lights - Red Amber Fender LED Light - PE89BR

Ellen: Hey everyone. I'm Ellen here at and we're going to be taking a look at the LED Trailer End Marker Light. This is going to be for your fender to show both the end of your trailer with the red light and also a side marker light. So it kind of does two in one with the two different colors. It has two little prongs to the back that are going to be our positive and negative connections. So it makes it pretty easy to wire this up.

The thing that I like about it is that it is an LED light. Typically they're going to last a lot longer, have a very lessen power draw than your typical incandescent, and there's no bulbs to replace, ever. So pretty much maintenance-free. As long as the housing doesn't get damaged should never have to do anything with this light. It should last a really long time.This does have, again, that dual face will have red on one side, amber on the other.

Again, we'll have our two little prongs at the back to mount that up. A wiring option that you can get as a base that looks something like this. This one is part number A65PB, you can find that here at There are a couple others that are also listed on the product page here. And basically these two prongs fit into the two holes there and then it mounts up to this.

So it provides a base, has one wire for this particular one coming off. This is going to be our power wire, and then it's grounded through the mounting holes. So you put your hardware through here and that'll ground it to the frame. Doesn't come with any hardware, but that is how it works. So I'm going to plug this in and you can also notice there's two little notches on either side that are going to snap in place with this style base.It's easier to just kind of do one at a time, sort of get your little prongs started there, and then it snaps in and voila.

And then we can connect our wires. So again, ground goes to the inside of the mounting hole, that little metal ring in there. And I put my little alligator clamp on one side, and then this little bullet style connector is our power connection. So once I have those two in place, lights on. You can see both sides they're illuminated, turning our light off in the studio. You can get a better idea of how bright it is. This is a P2 rated light so it's going to be for your side marker light. It can only be seen from a 90 degree angle, so you can really just be seen about like there. And then once we get flat, you can't really tell what's going on with that light any more. So that's why it gets that P2, it is DOT compliant.See it's pretty bright for just being those little lights there. My wire came off because I was trying to mess with it, but still pretty bright light for being such a little guy. So now let's talk about measurements. Disconnect my wires, set those aside and we can take this off the base so we can look at how big it is. The base does add a little bit of length, obviously for this one, it's about four inches long. That's pretty typical for these lights and the bases that go with them. To remove it, helps to have a little screwdriver to kind of pry out on the one side. So you can pop that out. Same thing over here, pry out on that and since those prongs are in there as well, also need to remove those. So the light itself without the base in place is about three and seven eighths inches long, just shy of four inches. The width is about an inch and a quarter. Height about seven eighths of an inch without including those prongs.We have two diodes. It is covered by a limited lifetime warranty and it is DOT compliant. Should be a pretty easy to use little light and that's about all there is to it. It does work with 12 volt DC systems so that's going to be pretty much standard for any trailer out there. All in all, I think it's going to be a nice little addition to your trailer to have that lighting function that you need. Hope this video has been helpful in deciding if this is the right light for you. If not, we do have other options available here at So check them out if you're interested. Thanks for watching.

Customer Satisfaction Score:

Customer Reviews

LED Trailer Fender Light - 2 Diodes - Amber and Red Lens - PE89BR

Average Customer Rating:  4.8 out of 5 stars   (38 Customer Reviews)

3-7/8" x 1-1/4" Rectangle. Trailer fender light functions as both amber front clearance and red rear clearance light. Hard-wired terminals are potted with polyurethane. Surface mounts with bracket (sold separately). Accepts 2-prong plug.


Plugged into existing mounts. Much brighter and updates look. Very happy with these components.


Beyond impressive experience factory replacement lights for my snowmobile trailer


Very easy installation.


A great LED, direct replacement for my old marker light. Highly recommended!


Fast shipping!


Definitely bring


Part arrived quick and on time.


Great service and product!!


Awesome service, Shannon was wonderful to work with me and straighten out my error! So glad to have found the needed lights for my cargo trailer at a decent price.


As advertised and received quickly as always with any orders from E-trailer.


Everything is always just what it says. Always but with confidence


Perfect fit easy replacement


This was a perfect replacement for my 2015 Bri-mar dump trailer. Very pleased! Snapped right into the original brackets!


On time and right every time!


As alway etrailer our go to supplier


Quick delivery, snapped right in and got me going again!


No complaint. Very satisfied. Will order in future.
William - 04/01/2022


Great company!


Lights worked great. Replaced my old ones and they were an exact fit for the ones on top of my fenders.







Show More Reviews

See what our Experts say about this Peterson Trailer Lights

  • Rumber Horse Trailer Saddle Rack Installation
    The Rumber Horse Trailer Saddle Rack # 9901-0 just sits on a swinging saddle arm and you can screw through it to bolt it to your saddle arm. We have multiple sizes of trailer fender lights so if you can shoot me a pic and give me the dimensions I can find a suitable replacement for you. One option we carry is the LED Trailer Fender Light Amber and Red Lens # PE89BR.
    view full answer...
    Image 1 for
  • Is There a Red and Amber 2-Wire LED Trailer Light With Mounting Bracket
    We do have exactly what you are looking for, which is a red and amber LED 2-wire trailer light that has a bracket. What you need is the LED Trailer Fender Light with Mounting Bracket # OPT49FR. This is a surface-mounted light that comes with its own bracket and has two wires, one for power and one for ground so you don't need to rely on the chassis ground.
    view full answer...
  • Bracket with Wiring Recommendation for Use with LED Trailer Fender Light # PE89BR
    You'd want the bracket part # A65PB with the clearance light part # PE89BR and would not need the additional harness since the bracket has the wiring built into it.
    view full answer...
  • Replacement Lights For A 2009 Transport DLX
    The Optronics Fleet LED Trailer Tail Lights w/ Grommets # TLL12RK are sonically sealed, and have a waterproof housing and lens that make the lights submersible. The LED lights will last 50 times longer than incandescent lights, and are more efficient by providing a brighter light with less power input. The lights have a polycarbonate lens and housing and are a recessed mount light. The LED Trailer Fender Light # PE89BR is a dual-face LED light that functions as both amber front clearance...
    view full answer...

Do you have a question about this Trailer Light?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Kathleen M
Installed by:
Kathleen M
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924