Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, seal, grease cap, wheel bolts, and lug nuts included. Galvanized finish is great for marine use.
Features:
Specs:
This trailer hub assembly has a zinc coating that resists corrosion, making it ideal for use on your boat or snowmobile trailer. All GAL-DEX hubs undergo a test in which they are sprayed with a 5-percent salt solution to determine corrosion resistance over time. These products are able to withstand 500 hours of constant exposure to the saltwater mist. This 500-hour salt spray rating indicates that a product is not only durable enough to last in freshwater environments, but it can also be used on trailers that come into contact with saltwater
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.9 out of 5 stars (25 Customer Reviews)
This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, seal, grease cap, wheel bolts, and lug nuts included. Galvanized finish is great for marine use.Purchased 4 brake kits and hub/drum assemblies for a 12 yr old tandem axle aluminum car carrier. Great product, quality, and delivery. Installed new bearings, brakes and drums, looks great and and rides line new...!!!
My salesman Troy provided me superb assistance and customer service. Kudos to etrailer and Troy..!!
Had to wait a few days for etrailer to get these plated hubs back in stock, but when they arrived installation was what you'd expect. Quality seems very good, and made in USA (bonus). These are Dexter brand hub/drums. Time will tell if the plating will make any difference on my boat trailer application. Originals were not plated and were ugly/rusty, but also 30 years + old so I opted to replace vs have them turned / wire-brush and paint. Glad I waited.
Fit perfectly, easy install
These drums are nice made in the USA parts with every thing you need to install them for half the money you would pay at a trailer shop.
Shipped to my door and package so they weren't all beat to crap when I received them.
Nice job etrailer.
Great quality. Seem very sturdy. Holding up so far after one seasons worth of use on my boat trailer.
Timely delivery,all parts were a perfect fit brake drums bearings and seals with instructions! No issues. Very reputable! Thanks again!! Satisfied customer
All parts were received and in new condition. The packaging was perfect. I will not install the brakes for another few days so rating performance is out for now.
etrailer was prompt in shipping and answered my questions by email and phone.
Hub looks great but I will replace the no-name bearings with Timkens.
Excellent product availability. Website is very easy to navigate, descriptions are spot on. Shipping is very fast and usually have my products in 3 days or less! Not to mention excellent and competitively priced. Very happy with all orders!
No problems ,Good product, pic is what I received. Very Happy
On time and great quality product.
Had them for about a year. Work great. They have been holding up to the saltwater. Don't see a spot of rust. And I never wash them off after pulling my boat out.
As always the shipping was fast, and this product is preforming fine.
Product as described. Bought two sets. One for immediate use and the other for back up for those long hauls that you never know what you may encounter.
Justin
11/13/2021
Works great
no problems everything fit and works we ll
great products, great price and even better customer service and shipping!
Extremely satisfied
Great quality product.
Thanks. Great service and prices.
Quick and accurate.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Roger
1/29/2018
Everything is good . No problems ! Roger