Replacement Spindle Washer For 3,500 Lb EZ Lube Spindle
Updated 09/22/2014 | Published 09/20/2014
Products Featured in This Question
Question:
I ordered replacement electric brakes and brake drum assemblies. Set had everything I needed except for that retainer thingies with tangs in it that you bend a tang up to retain the bearing castle nut. I wound up reusing the old retainers but wonder if you sell replacements? This is for the Dexter 10inch electric brakes with axles that have zerk fittings in them.
asked by: Rick K
Expert Reply:
For a 3,500 lb EZ Lube axle, the replacement spindle washer you will need is part # 5-101. This washer has an inside diameter of 1 inch, so you may want to measure the spindle diameter to be certain.
We do offer other replacement spindle washers, like part # 5-71 for 1-1/2 inch spindles, and part # 5-59, which is for spindles that measure 1-2/4 inches.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: 40" Vinyl Coated Safety Cables with Clevis Hook (Qty. 2) by Dutton-Lainson, 6,500 lbs.
- Shop: CE Smith Safety Cables with S-Hooks - 36" Long - 5000 lbs - Qty 2
- Search Results: safety cables
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Search Results: 6~84
- Shop: Tang Replacement Spindle Washer
- Q&A: Is a Spindle Washer Needed Between the Spindle Nut and Outer Bearing on Dexter 5 on 4-1/2 Hubs
- Search Results: grease seal
- Search Results: 23003
- Search Results: porch light
- Search Results: load light
- Search Results: clevis hook
- Shop: CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles - 7" Long U-Bolts - Zinc
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Does Trailer with 1-1/16 inch Spindle Need 1-1/16 inch Diameter Washer
- Q&A: What Size Rim is Needed for 205/75R14 Trailer Tire
- Video: Detailed Breakdown of the Easy Grease Trailer Hub and Drum Assembly
- Q&A: Replacement Dexter 8-247 Wheel Hub
- Q&A: How to Bleed Air from the Titan T43397007K Zinc-Plated Brake Actuator
- Q&A: Replacing/Upgrading The Suspension On A 2007 Colorado Tandem Axle 5th Wheel With LRE Suspension
- Q&A: Nut Size Used on Dexter 3500 lb Hub and Drum Assembly
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes