Replacement For 11033L Idler Hub and Spindle Ranger Boat Trailer

Published 09/16/2021

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized

(47)

$250.33

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized

(569)

$57.17

Question:

Hi. I have a 2007 ranger boat trailer with cool bath hubs. The trailer is a tandem axle. I need the front spindle and hub without the brake calipers. Could you give me the part number for a hub and spindle? It doesn’t matter to me if they are grease or oil hubs. Thank you.

asked by: Brandon

Helpful Expert Reply:

The 11033L hub shown in your photo was manufactured by Tie Down Engineering, or TDE. What you have there is a hub for a standard 3500 lb axle which has a 5 on 4-1/2 inch bolt pattern. For an idler hub, I'd recommend the galvanized # AKIHUB-545-35-G-K. The hub includes the bearings, races, grease seal, dust cover and lug nuts. These are grease hubs.

The spindle you need will depend on the diameter of the axle tube, which I have no way of looking up, but if you use the provided link, you can see the spindles we offer that would be compatible with the # AKIHUB-545-35-G-K idler hub.

expert reply by: Mike L