AL-KO 7230 Hub and Brakes Replacement Parts

Updated 10/02/2020 | Published 10/01/2020

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized

(44)

$240.67

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles

(2644)

$9.18

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2

(1077)

$138.26

Replacement Trailer Brake Magnet Kit for Dexter and Hayes / AL-KO 10" Trailer Brakes

(101)

$43.73

Replacement 10" x 2-1/4" Electric Brake Shoes - 1 Brake Assembly

(70)

$57.55

10" x 2-1/4" Electric Brake Shoe/Lining (One Wheel) - Hayes

(5)

$156.37

Replacement Trailer Hub Bearing - L44649

(2099)

$20.76

Replacement Trailer Hub Bearing - L68149

(2099)

$11.61

Question:

It is for a 2001 R-Vision Trail Lite Bantam 19 hybrid trailer. It has a dual axle made by AL-KO acquired by Dexter?. The axle tag says TYPE J195 24C919, Axle capacity 1134kg Static load radius is 316mm. Id like to repack the bearings and perhaps service the electric brakes. What parts would you recommend? The drum is marked AL-KO 7230, maximum dia 10.090. I measured the thickness = approx 3. I am not sure if this unit is just a hub or a hub/drum combo as I have not completely taken it apart as yet. I tried contacting AL-KO via email but I kept getting error messages that the email is undeliverable. I managed to call them, but the parts department did not return my second call. Im hoping you could help me find the replacement parts for my next project. You guys have been so helpful in the past! Thanks.

asked by: Carlos V

Helpful Expert Reply:

Dexter did acquire AL-KO axles and the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 is the full assembly replacement. If you just wan to replace the bearings and seal then you will want # L44649, # L68149, and # 58846.

For your brake assemblies, you will use the Replacement Trailer Brake Magnet Kit for Dexter and Hayes / AL-KO 10" Trailer Brakes # BP01-110. Then for the brake shoes you either use the 10" x 2-1/4" Electric Brake Shoe/Lining (One Wheel) # BP04-095 or the 10" x 2-1/4" Electric Brake Shoe/Lining (One Wheel) - Hayes # BP04-100 as AL-KO partnered with Hayes for many assemblies.