Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
(143 reviews)
Price: $272.24
In Stock
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
Item # 8-201-9UC3-EZ
Our Price: $272.24
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (143)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-201-9UC3-EZ
- 6 on 5-1/2 Inch
- For 5200 lbs Axles
- For 6000 lbs Axles
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Hub with Integrated Drum
- Pre-Greased
- Dexter
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Pre-greased hub is easy to install - no need to pack bearings
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 5,200-lb and 6,000-lb E-Z Lube trailer axles with #42 spindles
- Drum dimensions: 12" diameter x 2" wide
- Bolt pattern: 6 on 5-1/2"
- Grease cap flange diameter: 2.44"
- Wheel bolt diameter: 1/2"
- Weight capacity: 3,000 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 15123 (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 15245
- Grease seal (included): GS-2125DL
- Inner diameter: 2.125"
- Outer diameter: 3.376"
E-Z Lube-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-201-95 Dexter Pre Greased12" Hub and Drum Assembly for 5.2K and 6K Axles with Hardware - 6 on 5-1/2 - EZ Lube
Replaces 8-201-9UC3-EZ
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Defective
- Arrived Damaged
Customer Reviews
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased - 8-201-9UC3-EZ
Average Customer Rating: 4.8 out of 5 stars (143 Customer Reviews)
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and nuts included.by: James04/20/2022
What a difference, night and day! Worth every penny. My trailer rides like a dream now, the independent suspension made such a difference, no more bouncing on the roads especially when it gets rough. Customer service was excellent and they answered all my questions and made sure I had all the right equipment I needed. Would definitely do this again if I built another trailer.
by: Robert 02/15/2024
Everything arrived on time and as described. Will continue to order from E-Trailer. Great customer service and assistance in verifying the needed parts.
by: Jeff03/05/2023
Perfect fit for my united covered trailer. Very easy install. Also made in the USA!
by: Brilan05/29/2016
Would like to thank Etrailer.com For The Great Products and service! These Drum Assembly's worked amazing with the electric Brake assembly's I ordered with them. Products came in within 3-4 days! Can't beat that. Thanks ETrailer, got my trailer stopping again and didn't break the bank!
by: Richard09/13/2018
Fast Free shipping. Needed to replace all four hubs. Some had bad magnet wear. Two had loose races. Had great assistance selecting measuring original bearings to make sure I got the right parts. Heave shipping boxes. They did a good job stapling smaller boxes to the bigger box which helped boxes stay together.
by: Tyler 08/16/2023
Very easy to convert from old mobile home hubs. Braking power is incredible.
by: Jessie F03/28/2017
Comes with everything you need for fresh hub & bearings. Shipped fast! Great fit.
by: Roger06/07/2018
Fast Shipping!! Hub fit exactly as it should.I really had nothing to go by to find this hub.Went to etrailer and started searching questions submitted by others.In a very short while was able to find my axle number and there it was. I would highly recommend and will use for future purchases.
by: Bryan 07/26/2023
Great, always great support from the eTrailer team and arrived on time for trip. Thank you
by: Alan12/02/2016
Item: 8-201-9UC3-EZ; This item Is a replacement for my 5th wheel camper. Do to the fact while traveling the outer bearing failed on interstate I-40 late in the evening. The cost of replacing brakes, drum, bearing, seals, grease, plus service cost is Very Expensive after hours. Having these items on hand can save a lot of time and money.
Etrailer parts are top quality and best online price.
Thanks
Alan
12/6/2017
Great! I have recommended this item any times. Thanks, etrailer.com
by: Robert N.05/05/2017
Excellent service from etrailer staff. Super fast delivery. I wasn't expecting the drums to come with the spindle nuts and retainer clips. Pleased to see them in the boxes. They weren't listed with what is included on the site. Parts seem to be of good quality. I wish installing them was as easy as ordering them.
Robert N.
5/5/2018
No longer have these. I went to bigger axles. However, they worked great. When I need replacements on new axles, I will be purchasing from etrailer
by: Thomas05/18/2022
has performed as expected would buy aga in
Thomas
5/19/2023
part is working as expected would buy again
by: John a05/10/2018
received on time as promised. good replacement part but make sure you measure the axle grease seal. they come with 2 1/8 inch seals and my application required 2 1/4 inch. fortunately for me I had the spare seals on hand from previous order.
John A.
5/10/2019
brakes are working perfectly.
by: Jessie01/28/2018
Was easy to install. No issues in the first year. Still looked brand new when we repacked
by: Nice to have good details when puchasing a product08/14/2017
Nice to have good details when puchasing a product over the web. Fit as described. Great personal support when calling in as well. Purchased to convert stock humvee trailer 8 lug to 6 lug. Fit as described and quality was great.
Robert V.
9/5/2018
All the product I purchased has been working great.
by: Les A08/13/2016
Perfect way to buy brake drums. Everything you need and everything fit right. Good price and prompt delivery. Job went smooth.
Les A.
8/14/2017
Over 4000 miles, working great! Nice setup
by: Chester L.04/11/2017
I am writing this very favorable review of my online shopping experience with etrailer. Recently I had to replace the brakes, hubs, wheels and tires on my travel trailer. Please keep in mind that I am a 65 year old man without a lot of experience with online shopping. Never-the-less, I decided to give it a try in hopes of saving some money. To my surprise, etrailer made the experience very easy and painless. Before I placed my order on line, I had a question about one of the items on my shopping list, so I placed a call to them. I spoke with a very lovely and patient Customer Service Representative by the name of Michelle S. She was very helpful in answering my questions and encouraged me to call her back directly when I was ready to place my order; and so I did. During the shipping process, she kept me informed through emails the status of my order and everything arrived on time and in great shape. I truly appreciate the personalized services I received doing business with etrailer. They truly removed all of the uncertainty and nervousness of shopping online.
by: Robert07/30/2022
Exactly the right part, with all the required pieces. Really helpful that the bearing races were already pressed, made it a very simple job!
by: Wayne S03/31/2015
I bought the whole package, the brake assembly and hubs. It even came with bearings, rear seal and lug nuts. The shoes are
already on the backing plates. All you need to do is bolt the backing plate to the axle which is five bolts and splice the electric brake wire to your trailer wire. I thought the price was very reasonable and I got free shipping which would have been $126.
Very happy with this company and will do business with them again in the future.
by: Justin Paris04/06/2016
I ordered four Dexter drums and brake kits. Shipping was FAST, my order was placed about 3:45 one afternoon and at 12:15 the next day UPS was unloading it.
The quality of the Dexter parts was what I expected and the reason I paid extra. What I didn't like china made bearings, races and seals, so I spent another $180 with another supplier for U.S.A. made Timken bearings and races.
by: Glenn08/06/2018
The 8-201-9uc-ez trailer hub assy i ordered was great quality and exact fit. The customer service second to none. etrailer is a top notch company and will be my GO TO provider for my trailer needs from now on. Only improvement id like to see is the option to get Timken bearings in the wheel kits as they only provide the chinese junk as do most other companies. Great shopping experience. Thank you Gwendolyn for all your help!
by: The Donald10/07/2022
I bought these in 2014 for $79 each, now they are $247 each. Lets go Brandon.
by: David06/30/2020
The product was exactly what I was looking for at a fair price and using their price match program even go a better price. Staff was extremely helpful and responsive to my needs. Will definitely purchase again from trailer.
David A.
9/25/2021
we have several thousand miles on the drums and they are preforming perfectly
by: Mark09/23/2022
Sheryl was very helpful and knowledgeable in getting the right product to fit my Timbren suspensions. They were out of one of the Brake packages but she kindly split the order for us and got us what we needed asap while the other item is being restocked. Sheryl gets 5 stars from me!
by: Roger06/29/2015
This was a great purchase and a fair price. saved me a lot of time putting the brakes back together. I purchased new back plates with the pads and all parts pre-assembled and ready to bolt on the axles. slide on the new drums and bearing and i was done. quick easy and not expensive.
Would highly recommend buying from etrailer.
25
144
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Hub, Drum, And Brake Assembly For The Timbren Axle-Less 4 Lift SpindleTo get the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02 set up properly you need the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 and the Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ. Which is compatible with the Taskmaster ST235/75R15 Radial Off-Road Tire w/ 15" Vesper White Spoke Wheel # TA52RR. The Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2 Item #...
view full answer... - Timbren Axle Less System Recommendation that Can Fit 6 Lug Trailer HubsSounds like you have hubs like either the # 8-201-9UC3-EZ which is a hub/drum or the # AKIHUB-655-6-K which is an idler hub. Both hubs use the # 25580 inner and # 15123 outer bearing, which is compatible with the spindle used by the Timbren # ASR35HDS02 axle-less suspension that would give you an independent suspension setup.
view full answer... - Brake And Hub/Drum Assemblies For The Timbren Axle-less Trailer Suspension # TASR35HDS06The Dexter Electric Trailer Brake Kit w/ Parking Brakes # 23-112-113 would be a fit for the 5-bolt pattern of the Timbren Axle-Less Trailer Suspension # TASR35HDS06 . Both the Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ and etrailer Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K use the same bearing and sizes but only the etrailer # AKHD-655-6-EZ-K has the correct size grease seal. For parking brakes we really don't have much of a selection besides the Dexter Breakaway...
view full answer... - Replacement Hub/Drum that Could Fit Henschen Duraflex 5,000 lb AxleHenschen has been out of business for about 12 years, so I wasn't able to find much information about your axles online. From what I was able to find they seem to use standard trailer bearings and hubs. So the part # 8-201-9UC3-EZ should work but you might still verify the bearing diameters on the spindle as 1.25 and 1.75 inch.
view full answer... - Upgrading Suspension Components on 2005 Forest River 37SP Toyhauler with 5200-lb AxlesSometimes a trailer with 5200-lb-rated axles will actually use 6000-lb-rated axles with other components that are not rated as highly. You will need to contact AL-KO to find out whether your current axle actually has the 6000-lbs capacity to allow you to usefully upgrade the other components such as the hubs. You can change out your hub/drum assemblies as long as you can match the bearing numbers, but note that the hub/drum assemblies we offer can be used with several axle ratings. For...
view full answer...
- Can 3500lb Axles On Heartland Pioneer RL 250 Be Replaced With 6000lb Axles?You can replace the 3500lb axles on your Heartland Pioneer RL 250 with 6000lb axles, but you will first need to measure your current axle from hub face to hub face, and spring center to spring center. Once you have that measurement you will need to find an axle with the same measurements. For example the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs # 7461121 has a hub face to hub face measurement of 95", and a spring center to spring center measurement of 80"...
view full answer...
- Hub/Drum and Brake Assembly for Timbren Axle Less Kit ASR35HDS02 The hub and drum you mentioned almost would fit the Timbren Axle Less kit # ASR35HDS02 but it comes with the wrong size seal so instead you'd need the # 8-201-9UC3-EZ which is basically the same hub but with the correct seal. This will work with the brake kit you mentioned # AKEBRK-6.
view full answer... - Replacement Sealed Bearings and Complete Assembly for 2010 Forest River Wildcat 31TSSince you have the sealed bearing, it is the Nev-R-Lube. The Bearing, 42MM Nev-R-Lube 42MM x 76MM x 39MM # 31-73-3 will also use the Outer Snap Ring for Nev-R-Lube Bearing Kit 31-71-3 # 69-96. The Trailer Hub & Drum Assembly - 6,000 lbs Axles - 6 on 5-1/2 - Nev-R-Lube # 8-388-80UC3 is the replacement assembly.
view full answer... - Trailer Axle Replacement for 2015 KZ RV Spree Escape 200 with 65-1/2 Inch Spring CentersIt does sound like you either have a bent axle since your wheels are pointing inward at the top. It sounds like an overloading issue caused this because with water you stated your weight is well above the max capacity of 3,500 lbs. The axle and springs would be rated for the same capacities so springs and axle need replaced. You can increase the axle capacity, but that doesn't account for the other components like the frame, the coupler, springs, etc. that may also be rated for that...
view full answer... - Recommended Axles For Travel Trailer With 68-1/4 Inch Spring Center To Spring Center MeasurementYou do have some odd measurements. You can absolutely use the parts that you mentioned and drastically change all of your trailer connection points (Plan A), however, I recommend doing something much easier and cleaner. It won't require finding new connection points for your springs, building outer wells, or adding different springs. So consider this Plan B. We have the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02. This...
view full answer... - Recommended Drums For Hayes Axle On 1983 Carriage Conestoga Fifth Wheel TrailerThere are a couple things going on you can check. First, your shoes may be adjusted out too far and that is what is causing the fit issue with the drum. You will want to adjust the brakes so that they are not expanded as much and see if that helps. If you are going to replace the drums you will need to know the bearing and seal sizes that fit your spindles. I have attached a photo that shows where the numbers can be found on your old bearing and seal and make sure they are a match with...
view full answer...
- Timbren Axle Less Kit with Off Road Wheels and Tires for 2019 Lance TT Model 1985I'd go with the 4 inch lift and off-road tire version of the Timbren Heavy Duty Axle Less Kit part # ASR35HDS02 for what you are looking for. This would accommodate off-road tires like you are wanting and will give you much better ground clearance. For hub/drums you'd then want the part # 8-201-9UC3-EZ and for brake assemblies part # 23-105-106. Then for an off-road wheel and tire that is 15 inch diameter and correct bolt pattern we have the Westlake ST235/75R15 Offroad Wheel and Tire...
view full answer... - Hub Bolt Pattern and Bearing Compatibility with 5K Trailer AxlesYour existing 3500-lb hubs could be used on a 5K axle if the spindles on both axles used the same inner and outer bearings. But usually these two different axle capacities mean different bearings with very different dimensions. That means 3500-lb hubs will not fit. Also 5K hubs use the 6-on-5-1/2 wheel bolt pattern. The most common bearings for a 3500-lb axle are # L68149 (inner) and # L44649 (outer) while a 5200-lb axle typically uses bearings # 25580 (inner) and # LM67048 (outer). If...
view full answer... - Are Dexter Hubs for Timbren ASR35HDS02 Sold in Quantities of 1 or as a PairIf the Toyota 4Runner has a 6 on 5-1/2" bolt pattern (which I do believe it does), then the Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 # 8-201-9UC3-EZ would match that bolt pattern; these hubs are compatible with the Timbren # ASR35HDS02 as well, so that would give you a matching set of parts. The Dexter trailer hubs are sold as single hubs, so you would need to purchase 2 of them.
view full answer... - Timbren Axle-Less Trailer Suspension System For 33 Off Road TiresI do have an option for you but the Timbren Axle-Less Trailer Suspension System - Spindle w/Brake Flange part # ASR2000S02 are not made for that large of a tire. A 33" tire has a section width of 10.04" with a 33" diameter so there will not be enough clearance to use this Timbren system. I recommend to use the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS02 which is designed for off road tires. It has a 4" lift spindle for clearance. The spindle accepts bearings part...
view full answer... - Recommended Hub/Drum and Idler Hub for Timbren Axle-Less Suspension # ASR35HDS02For a brake drum hub, Timbren recommends the # 8-201-9UC3-EZ from Dexter Axle, which features a 6 on 5-1/2 bolt circle. For an idler hub, go with the # AKIHUB-655-6-EZ-K. Both hubs use the # 25580 inner and # 15123 outer bearing, which is compatible with the spindle used by the Timbren # ASR35HDS02 axle-less suspension you referred to. If you go with the hub/drum, you'll also need a brake assembly. I recommend going with a Nev-R-Adjust assembly, like # 23-459 for the right side and #...
view full answer... - What is Difference Between Dexter Hubs # # 8-201-9UC3-EZ and # 8-201-5UC3-EZThe only differences between the two hubs you mentioned # 8-201-9UC3-EZ and # 8-201-5UC3-EZ are that the 8-201-5UC3-EZ is not pre-greased and the other is and they have different bearing between the two. But the bearings both have the same inner diameter so it really doesn't matter much. So if I were you Robert I would go with the pre-greased part # 8-201-9UC3-EZ. The bearings that come with both are from China.
view full answer... - Will the Dexstar Conventional Steel Wheel # AM20514 fit a Dexter 8-201 Trailer HubActually I went out and test fit a Dexstar Conventional Steel Wheel # AM20514 on a Dexter Hub part # 8-201-9UC3-EZ like what you have and found that the two are compatible with each other. I attached a couple pictures that I took that shows the two working together.
view full answer...
- Replacement Hub And Bearing Kit For An AL-KO 8460 HubPast customers have told us the AL-KO 8460 uses inner bearing 25580 and outer bearing 15123, which would make the Timken Bearing Kit # TMK82VR the correct replacement bearing kit for that hub. If you are looking to replace the hub entirely the correct hub will be the following: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased # 8-201-9UC3-EZ
view full answer... - Easy Maintenance Electric Trailer Brakes Recommendation For Timbren Axle-Less Suspension #ASR35HDS02To go with your Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS02 I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459. This brake kit is self adjusting so that you will not have to adjust the brakes after the first 200 miles or every 3,000 miles after that. It has the same 5 bolt mounting pattern and includes a brake for the left and right side. The Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ contains 1 complete hub assembly with the correct...
view full answer... - Trailer Capacity for Axles with 5 LugsTechnically, a trailer rated for 10,000 lbs can have 5 lug hubs. They are most common on 3,500 lb axles but can be used on the rare 4,000 lb axles as well. You could have a gooseneck or 5th wheel trailer with the 10,000 lb capacity and tandem axle 5 lug axles because the tongue weight can carry the rest. If you have a triple axle trailer, it is far more likely to have that capacity. Most trailers rated for that capacity will have larger tandem axles and require a 6 on 5-1/2 inch bolt...
view full answer... - Hub Recommendation for the Timbren Axle Less System part # ASR35HDS02For a hub drum that would fit the Timbren Axle Less System part # ASR35HDS02 you would want the # 8-201-9UC3-EZ. For an idler hub you would want the # AKIHUB-655-6-K.
view full answer... - How to Pick Out Replacement Hubs for a TrailerIn order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub...
view full answer...
- Axle Recommendation for Building Off Road Trailer with Hubs with 6 on 5-1/2 inch Bolt PatternSince the plan is for the trailer to be an off-road trailer I would recommend a Timbren system that has a built in lift and is set up for wider tires. For that the # ASR35HDS02 would be perfect as it fits that criteria. Also, since these don't have an axle that runs through them that helps significantly with ground clearance. For a brake hub that would fit the spindle you would want the part # 8-201-9UC3-EZ as it also has the correct bolt pattern. For just an idler hub you would want the...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Patrick B
Video Edited:
Joshua S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Roger
6/7/2019
Great, no issues.