Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased
(37 reviews)
Price: $62.64
Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased
Item # AKIHUB-655-6-EZ-K
Our Price: $62.64
In-stock alternatives that can ship today
- All Info
- Reviews (37)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-655-6-EZ-K
- 6 on 5-1/2 Inch
- For 6000 lbs Axles
- Hub
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Easy Grease
- EZ Lube
- Pre-Greased
- 1/2 Inch Stud
- 15123
- 25580
- etrailer
Hub is designed for use on trailer idler axles. Fits 6,000-lb Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.
Features:
- Trailer hub assembly fits idler axles
- Bearings, races, seal, grease cap, and lug nuts are included
- Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Zinc-enriched paint finish
- Pre-greased idler hub is easy to install - no need to pack bearings
- Lithium complex, multipurpose grease keeps bearings lubricated
- QAI and CSA certified
Specs:
- Application: 6,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Wheel size: 14-1/2" to 16-1/2"
- Bolt pattern: 6 on 5-1/2"
- Wheel stud dimensions: 1/2" diameter x 1-1/4" long
- Grease cap flange diameter: 2.45"
- Weight capacity: 3,000 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 15123 (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 15245
- Grease seal (included): GS2250DL
- Inner diameter: 2.25"
- Outer diameter: 3.376"
E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
KH-655-07-19 AxleTek Trailer Idler Hub Assembly for 6K Axle with Hardware - 6 on 5-1/2 - EZ Lube - Pre Greased
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- etrailer mistake
- Did not fit
Customer Reviews
Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased - AKIHUB-655-6-EZ-K
Average Customer Rating: 4.9 out of 5 stars (37 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 6,000-lb Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.by: Kevin 08/03/2023
Easy ordering and received quick. Already put on trailer and works great. Exact duplicate to what I had
by: Chris08/17/2022
Doesn’t fit inside the brake rotor on my dexter 6k hubs.
Comments
Hey Chris, it sounds like you have slip on disc brakes. Can you be more specific about why the idler hub does not fit inside? Is the bolt pattern different? This particular idler hub has a 6 on 5 and a half bolt pattern. If you let me know what you have on your trailer I can assist you further. A photo will help as well.
-- 
Heather A - 09/02/2022by: Thomas08/26/2022
I have an old homemade trailer I use for hauling my tractor. The seals and bearings seemed to be failing on the front axle so after watching your video I decided to replace the hubs. I did order the wrong hub,the bearings were slightly larger than the ones on the old hub but after trying it anyway it looks like they are going to work just fine! Fast delivery. Pre-Greased hubs work great!
by: Tim10/18/2022
These hubs arrived greased, assembled and ready for installation. Can't ask for more than that!
by: Thomas 12/16/2022
Fit right and the hud doesn't brake like other hubs .we used on are equipment.
by: James 10/08/2022
got them a head of time. shipping was fast. didn't have any problem installing them.
by: James 06/28/2022
"I will give your company the highest rating I can. Service was good ,no problems. Parts came in quick. I had no trouble installing them."
by: Dennis 12/12/2022
Very professional from beginning and hanging phone.up.
Definitely I will do business again. Have a Nice day and Merry Christmas!!!
by: Ray O.06/16/2016
I ordered hub kit to replace the house trailer hubs on my trailer. This was the right fit and a great price.. The kit came with all the bearings, seals, dust caps, lug studs, and lug nuts.. Great place to pick up all your trailer needs!
by: Joe R.02/09/2017
Greetings Nickey;
I received the 4 hubs Yesterday and am glad to say, they are very Heavy Duty. My plans are to replace the Mobile Home hubs on my 18' trailer to have a modern trailer with heavy Duty hubs that use the more easily available 6 bolt wheels. The old style Mobile Home wheels W/ tires are no longer available in this area, and very expensive when you do locate any.
Many thanks for your follow-up, as this shows your concern for your products and most importantly,,,your customers.
by: Ross 12/29/2020
Excellent customer service which I find to be a dieing art, quick turnaround and I received exactly what they advertised. Quality parts and attention to detail. I’ll be ordering again and again.
by: Garrett 01/24/2020
Shipping was extremely fast and great prices. The hubs arrived and were a perfect fit. Will definitely shop here again for any trailer needs! The wife's reaction when she grabbed the box from the UPS driver was priceless, she had no idea that 4 hubs would way so much lol.
by: Jonathan 03/21/2021
Worked well for the many miles we’ve put on them! Etrailer also has the best customer service! I had to call and ask a few questions before placing an order and they answered everything without hesitation.
by: LRK07/01/2022
Hubs worked great on my old axle. Went right on and axle appears and works like new. Cost effective fix.
by: Jeff02/07/2022
Lightning fast shipping, great product!
by: Randy09/12/2018
The only place for all your trailer needs, they have it all! Fast shipping too.
by: Bruce Hart06/12/2017
Great product and price.
Comments
The parts worked out great. You are a great source for trailer parts and you are well regarded.
Bruce H - 06/12/2018by: Marty02/14/2017
Everything I have purchased from you has been good quality and shipping is fast !! I would definitely recommend you to anyone. Thanks
by: Rod W08/17/2020
Fits the axle it said it would... working great one year later.
by: Guy 05/25/2023
by: Mike07/30/2019
service could not have been any better product was received quicker than expected Thank you very much .
by: Grant 12/17/2020
Perfect fit ! Great service from Odelia! Package arrived 2 days early. Put the hubs on today, no problems! Will come back again as needed. Thanks
by: Richard 07/19/2023
by: Neil 08/03/2023
Nice
by: Jamyn08/01/2023
25
37
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Can Dexter 6 Lug Hub/Drum be Replaced with Standard HubYes, there are hubs that can replace your Dexter hub/drums that you have currently. If the axle is rated for 6,000 or 5,200 lb you would want the hub part # AKIHUB-655-6-EZ-K or if it's rated for 3,500 lb you'd want the # AKIHUB-655-35-EZ-K.
view full answer... - Will 15 Inch Trailer Wheels Fit etrailer Idler Hub AKIHUB-655-6-EZ-KA 15 inch wheel may not fit idler hub # AKIHUB-655-6-EZ-K. It was designed for the larger pilot holes on 16 to 18-1/2 inch wheels. But both 15 and 16 inch wheels have a 4.25 inch diameter pilot hole so provided the wheels you have now have a pilot hole that is 4.25 inches or larger it will fit the hub.
view full answer... - Locating Replacement Hubs for 2004 Four Winns TrailerIn order to determine the correct replacement hubs for your 2004 Four Winns Trailer you will need to pull one of the assemblies. Once you have the hub removed take out the inner and outer bearings and look for a number that should be stamped right inside of each of them. If you can't read the numbers you can also take a few measurements along the spindle with a digital caliper. I have attached an image to assist. If you can tell me the numbers you found, or the measurements you took,...
view full answer... - Solution for Trailer Hub Replacement for Dexter 8-233aI have an alternative solution for you to consider but based on the info you listed we don't have a standard trailer hub that will fit in place of what you have now. This is not uncommon as mobile home axles are generally considered to be one-time-use. Most likely you'll need new axles. We do have axles available if you need a replacement. Using the capacity, overall length, and spring center length you can find the right axle for your needs. I attached a page that has all of the trailer...
view full answer... - Replacement 6-on-5-1/2 Idler Hub Kit to Replace Hub 82655You can use 6-on-5-1/2 idler hub assembly # AKIHUB-655-6-EZ-K for your application. This hub kit includes bearings 25580 and 15123 along with races and a grease seal.
view full answer... - Replacement Hub for #42 Spindle on Homemade TrailerAlthough we do have hubs that will fit your #42 spindle, nobody makes one with a 5 on 4-1/2 or 4 on 4 bolt pattern. The only option would be to use something like the Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K. This hub and drum assembly has a 6 on 5-1/2 bolt pattern and is designed for 5,200 lb and 6,000 lb axles. If you need brakes as well then you could use the # AKEBRK-6 along with the # BRKH12 mounting hardware. If you only need an idler hub the # AKIHUB-655-6-EZ-K...
view full answer... - Replacement Boat Trailer Hubs for #82655If you are looking for replacement hubs for your boat trailer, we offer lots of great solutions. The Trailer Idler Hub Assembly # AKIHUB-655-6-EZ-K is a great kit that includes everything you need to replace your 82655 hub. The bearings ( # 25580 for the inner bearing, # 15123 for the outer bearing), races, and grease seal included in this kit can also be purchased separately if needed. Check out the video linked below for details on assembly and installation.
view full answer... - Trailer Lights Do Not Work and Brakes Lock Up in ReverseIf none of the lights on your boat trailer are working then it most likely the fuse on the tow vehicle. I know you said you have checked them but it is imperative to look in your owner's manual to be sure you have the correct locations for each circuit. Once you do find the correct circuits you will need to remove each fuse and inspect the element to make sure there is not a break. The break can be faint so be sure to pay special attention. If you are absolutely certain the fuses are good...
view full answer... - Replacement Trailer Hub Assembly That Uses Bearing Sizes 15123, and 25580The CE Smith Trailer Idler Hub Assembly # CE13611 will not fit your trailer with the hub bearings 15123 and 25580. Your hub bearings are most commonly found in 6,000lb axles and will require one of the following hubs. etrailer Trailer Idler Hub Assembly # AKIHUB-655-6-EZ-K for an EZ Lube axle etrailer Trailer Idler Hub Assembly # AKIHUB-655-6-K for a standard spindle Both of these hub assembly's will include new inner and outer bearings and races, lug nuts, grease caps, and a 2.25"...
view full answer... - Solution for 5,200 Lb Replacement Axle With 73" Hub Face MeasurementI do have a solution, but we do not have a replacement axle that matches that capacity and hub face measurement. What I can offer instead is the universal Timbren Axle-Less Trailer Suspension # ASR5200S01. This system fits any trailer width so you don't have to worry about matching the length. It will also replace/upgrade your suspension using AEON rubber springs that work independently. Removing the axle beam will give you additional clearance as well. If you also need hubs you can...
view full answer... - How to Determine the Replacement Hubs for a 2002 Magic Tilt TrailerTo determine what the correct replacement hubs are for your Magic Tilt trailer there is a little bit of information that we will need. We will need to find out inner diameter of both the Inner and Outer Bearings as well as the inner diameter of the Grease Seal. To ensure that your current wheels are compatible with the hub that you get you will need to make sure that you also have the appropriate bolt pattern on your hub. If you remove one of your current hubs you should be able to see...
view full answer...
- Replacement for 826555 Idler Hub on Boat TrailerIt sounds like you have 6K axle, if that's the case we do offer a hub that should work for you. Part # AKIHUB-655-6-EZ-K is an idler hub assembly for a 6K axle with a 6 on 5-1/2 inch bolt pattern. The hub uses a 25580 inner and 15123 outer bearing along with a GS2250DL grease seal. To confirm that this is correct, please check the reference numbers on your inner and outer wheel bearings, or you can use a digital caliper like # PTW80157 to measure the surface of the spindle where the inner...
view full answer... - Replacement Trailer Hub for a 2004 Four Winns Boat Trailer with 6 on 5-1/2 Wheel Bolt PatternThe replacement hub that you will want for your 2004 Four Winns boat trailer is part # AKIHUB-655-6-EZ-K. This is a 6,000-lb hub with the same bearings, grease seal and 6 on 5-1/2 inch bolt pattern as your current hubs. This hub comes with everything you need to install the hub except the bearing grease. If you would like to pick up extra bearing grease, I recommend our marine grease, # L54FR. These are 3 cartridges 3 ounces each, which you can use with or without a mini grease gun....
view full answer...
- Replacement Spindles, Hubs and Brake Assemblies For Custom Trailer Using Shortened Mobile Home AxlesBased on the image you sent of the spindle it looks like you will be best off replacing the spindles with the more common #42 Spindle # TRU37FR. The spindles are severely rusted and the grease seal would not hold seal properly allowing water to get in and damage any hubs you install. It would be best to install this on all the ends of your axles so you will have the common sizes when you need to replace parts as the mobile home axles do not use common parts since they are designed to be...
view full answer...
- Will 16 Inch Tires Fit Timbren Axle-Less Suspension System # ASR35HDS05As long as there is a hub that fits the spindle and has the bolt pattern needed for the wheels then yes the Timbren Axle-less system # ASR35HDS05 will work with 7.50-16 tires. For example hub # AKIHUB-655-6-EZ-K will accept 16 inch tires as long as the wheel has a 6 on 5-1/2 bolt pattern. I have linked a help article on determining wheel bolt patterns for you.
view full answer... - Do We Have Grease Used With Easy Grease Trailer Idler Hub AKIHUB-655-6-EZ-KWe have the same grease used in the Easy Grease Trailer Idler Hub Assembly for 6K Axles # AKIHUB-655-6-EZ-K, just with a different color. The hub comes pre-greased with a lithium complex grease, and you can get exactly that - as well as the needed grease gun - with the following: - LubriMatic LMX Industrial Strength Grease # L11390 - LubriMatic Standard-Duty, Lever Action Grease Gun # L30200 The # L11390 is a red grease but is otherwise the same and will be exactly what is needed for...
view full answer... - Recommended Hub for 15 Inch Wheel On 3,500 Lb Timbren Heavy-Duty Axle-Less SuspensionThe Trailer Hub and Drum Assembly part # AKHD-655-6-EZ-K (2) along with the Electric Trailer Brake Kit part # AKEBRK-7-SA or the Trailer Idler Hub Assembly part # AKIHUB-655-6-EZ-K (2) will work with the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS02 and it will allow you to use a 15" wheel with 6 on 5-1/2" bolt pattern.
view full answer... - Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment TrailerThanks for the information on your trailer. For your axle with brakes I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 # AKHD-655-6-EZ-K if you have the spindles with the integrated grease zerk. If you have standard spindles, I recommend # AKHD-655-6-K which have the standard grease cap instead. These assemblies will fit perfectly with your axles based on the bearing and seal information you gave as well as 14.5 inch wheels. Then...
view full answer... - Looking For Replacement Trailer Axles With 70 Inch Spring Center and 85 Inch Hub Face SpacingWe carry a Dexter 6K axle that comes very close to the measurements you specified. The # 8327826-EB has an 86-1/2 inch hub face to hub face dimension, which means it would only be 3/4 of an inch longer on each side which should still work well for you. The spring seats are 71-1/2 inches apart, but they could easily be removed and new ones could be tacked in place using part # TRSS300 which are sold individually. The # 8327826-EB comes complete with electric brake assemblies and a hub/drum...
view full answer... - Hubs and Wheels to Fit 3,500 Pound Heavy Duty Timbren Axle-less SystemThe # TASR35HDS07 Timbren system is a heavy-duty system so it actually fits higher rated hubs than its 3,500 pound capacity. I recommend going with # AKIHUB-655-6-EZ-K which fit the Timbrens and are for the EZ Lube spindles.ve The hubs have a 6 on 5-1/2 bolt pattern so the tire and wheel combo I recommend is part # AM32575. These are 225/75-15 radials on black steel wheels. If you prefer a different style I've linked our entire selection of of combos on 15 inch wheels for you.
view full answer... - 16" Wheels for an Off Road Camper with 6 on 5-1/2" Hubs and Tires Needing 7" - 8" Wide RimsIt looks like you're looking for 16" wheels for your Idler Hub Assembly, part # AKIHUB-655-6-EZ-K, with tires that need a 7" - 8" wide wheel. Since this hub has a 6 on 5-1/2" bolt pattern, we can narrow all of this down to the only wheel we offer that meets all of these specifications. That wheel is the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel w/-8mm Offset, part # AM22657. It has a width of 7" and a weight capacity of 3200 pounds, so they also match your hubs' specs. As for the...
view full answer... - Do Different Timbren Axle-Less Suspension Systems Have the Same Camber and Ride HeightThe caster and camber could be the same on the # TASR35HDS03 and # ASR2KHDS05. The system has a slight manufacture camber. However, it is up to you on how much camber you have based on the installation. This can be changed using the included shims. As far as the ride height is concerned, these do not have the same dimensions. This will result in a different height between the systems when installed. The # TASR35HDS03 will also stick out farther. Since there is no real advantage to using...
view full answer... - Which Hubs Fit the Timbren Heavy-Duty Axle-Less Trailer Suspension # TASR35HDS06 with 2" LiftThe hubs that fit the Timbren Heavy-Duty Axle-Less Trailer Suspension # TASR35HDS06 use inner bearing # 25580, outer bearing # 15123, and a grease seal with a 2-1/4" inner diameter. For regular hub use part # AKIHUB-655-6-EZ-K but if you are wanting to incorporate brakes then you want hub and drum part # AKHD-655-6-EZ-K with the brakes # AKEBRK-7-SA for electric or # AKFBBRK-7 for hydraulic. I have attached some installation videos that you can reference as well.
view full answer... - Hubs to Use With Kodiak Disc Brake Kit K2R526DKGSince the Kodiak Disc Brake Kit part # K2R526DKG is a slip on disc brake kit you would need an idler hub like the part # AKIHUB-655-6-EZ-K which is a 6k hub and has the correct 6 on 5-1/2 inch bolt pattern. We don't have a Dexter hub in this configuration but the etrailer hub I mentioned would work really well and is also pre-greased with LMX red grease too for an easier and cleaner install.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
David F
Video Edited:
Jacob T
Video by:
Dustin K
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Mike S
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.