Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
(287 reviews)
Price: $58.56
In Stock
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
Item # AKIHUB-545-35-G-EZ-K
Our Price: $58.56
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (287)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-545-35-G-EZ-K
- 5 on 4-1/2 Inch
- For 3500 lbs Axles
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Hub
- 1/2 Inch Stud
- Easy Grease
- EZ Lube
- etrailer
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.
Features:
- Marine-grade trailer hub assembly fits idler axles
- Bearings, races, seal, grease cap, and lug nuts are included
- Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Galvanized finish offers excellent corrosion resistance
- Ideal for use on a boat or snowmobile trailer
- QAI and CSA certified
Specs:
- Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Wheel size: 13" to 15"
- Bolt pattern: 5 on 4-1/2"
- Wheel stud dimensions: 1/2" diameter x 1-5/16" long
- Grease cap flange diameter: 1.99"
- Weight capacity: 1,750 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
H-545-97 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - Galvanized - EZ Lube
Compare to Dexter 8-248-50UC1-EZ
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized - AKIHUB-545-35-G-EZ-K
Average Customer Rating: 4.7 out of 5 stars (287 Customer Reviews)
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.by: Glenn04/07/2024
The grease caps that came with the set does not fit the hub. It is bigger.
by: George 02/20/2024
I placed my order for hubs and bearing w Bay in customer service as I had a couple questions which she answered well. The package was shipped quickly. It arrived with one problem. I called Customer service and spoke with Kate who was very helpful and provided a solution and to replace a item. I was called later by Patrick the shipping lead who assured me the replacement was shipped and apologized for the error. Always excellent service at Etrailer. The only place i will shop for trailer parts.
by: Casey 03/11/2024
The team at etrailer helped me find the right parts for my trailer. They provided excellent customer service.
by: Paul 12/29/2023
I've had the hubs on for one year of use and they have performed perfectly. The price was good and delivery was timely. I'm very satisfied.
by: Joe05/11/2024
etrailer was very helpful. The hub that was sent turned out to be the wrong one for my trailer. A refund was promptly issued. The customer service was kind and helpful. I will definitely do business with etrailer again.
by: Michael 05/23/2024
Perfect replacement 1377
by: Lynes Special Delivery 09/20/2017
Couldn't be more satisfied! I change from 5 on 5 to 5 on 4.5. I've been rolling on these hubs about 2500 miles. Every time I jack up the trailer I spin the tire, smooth as ever. Thankx LSD
Lynes D.
9/20/2018
1 year - 35k miles Im still very happy with the set of idler and brake hubs, bearings are still rolling smooth. I only use 1 type of grease Lucas RedNTacky2, about every 1k miles pull the rubber plug, 1/2 pump of grease not too much or youll blow the seal! Most common problem people have! Ill be buying another set for the trailer Im building. Keep making people happy, Thankx LSD
by: Andrew 08/30/2023
I ordered on a Sunday to replace old 5x4.75 (uncommon size) hubs after discovering the new wheels and tires I ordered were 5x4.5 (common size) no I did not measure my old wheels. My old bearings were superseded by these bearings included in this kit. Assembly was a breeze. These were marked as shipped on SUNDAY! Thanks, you have my business.
by: Donald04/19/2020
Parts fit well and assembled easy, price was very fair. This is the 3rd time I've bought products from etrailer and have been pleased every time.
Thanks
Donald
4/22/2021
Good
by: James B04/05/2018
Thank you for your assistance with my purchase of new hubs for my boat trailer. They are exactly as described and they fit perfectly on my trailer. I am attaching a few photo's of the hubs installed. I would recommend your company to everyone who needs hubs........EXCELLENT SERVICE.
by: Kevin04/12/2019
Ordered the hub and recipe it very quickly. They provided a video for reference on installation. It was very well made and easy to install. Very pleased with it, but the best part was the customer service. The old hub and bearings were so destroyed that I couldn’t get any numbers off of it. The lady from etrailer stayed on the phone and helped me research it until we found the right hub and bearings!!! In the end it was exactly what I needed and as happy as I am with the product, I’m more happy about the friendly and knowledgeable customer service they provided!!! Highly recommend the company and the products they sell!!!!
by: Nick 05/24/2024
Everything showed up perfectly
by: Check Bearing Sizes08/13/2023
The , order window for this product did not show the bearing sizes, and they shipped me the hub with wrong bearings, so I had to return it. Looking over the item description a 2nd time, It was difficult to locate the bearing sizes. That feature should be very visible for customers to find, so that they don't order the wrong size bearings.
by: Robert 11/21/2023
Great product, arrived a day earlier than expected with the free shipping option. Will buy again from etrailer when it’s time to do it again.
by: Bill07/05/2023
The hub assemblies I bought worked fine for my trailer, thank you Martha O. I was a little disappointed that I didn't get American made products but overall the Chinese parts fit fine. The packing left a little to be desired, one dust cap was dented and I had to do some filing on it before I could hammer it in to place. One roller bearing casing was also dented a small amount but the bearing was still smooth so I went ahead with it. The parts did travel from Missouri to California and the box was pretty beat up. Maybe etrailer could double bag the parts? The box did get here in just a few days so they shipping was good. I would buy these parts again if I ever needed to.
by: Charles 04/01/2024
Delivery was pretty fast and they didn't mess up my order.
by: Dominick10/11/2023
Absolutely excellent service and parts
by: Ron 02/12/2024
Received what I needed when I needed it. Very competitive price.
by: Paul05/26/2023
No castle nuts or washers with this
by: Kevin 06/18/2023
I have always had good service with etrailer but this time it appeared my order was going to be two weeks out on delivery which would of hampered my vacation. I contacted Gwen at etrailer asking if she could look into the delayed shipment, she was very professional and extremely nice stating she would look into the product shipping early but there was no promises. I received my order two days later, hats off to Gwen for saving my vacation
by: David 02/27/2024
Everything went together very easily
by: Brian 03/15/2024
Great service fast delivery.will use again for sure.
by: 03/08/2024
Great value
by: Eddie 07/03/2023
Love all the products I have purchased from E traile BUT until E trailer starts shipping with fed X or a faster delivery company other than the United States Postal Service, which is very slow. It cost me a weekend of no boating and almost missed out on Fourth of July boating.
by: Robert 07/19/2023
Bought 2 of these as an emergency fix if needed. Product was as described and appears to be of good quality. Came with every piece pictured and was shipped quickly. Only time will tell and hopefully I won't have to use them.
25
287
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Which Bearing Buddy to Use with Trailer Hub # AKIHUB-545-35-G-EZ-KThe correct Bearing Buddies to use with the trailer hub # AKIHUB-545-35-G-EZ-K that you referenced are part # BB1980A for chrome plated or part # BB1980A-SS for stainless steel.
view full answer... - Recommended 10 Stainless Steel Disc Brake Kit for Tandem Axle Boat TrailerThe Kodiak Disc Brake Kit part # K2R35S is the best all stainless steel disc brake kit we offer; the rotors, calipers, and mounting brackets are all made of stainless steel. In order to use this kit you'll also need a set of idler hubs, the Trailer Idler Hub Assembly part # AKIHUB-545-35-G-EZ-K but you won't be able to get these in stainless steel. For brake lines, the Kodiak Hydraulic Brake Line Kit part # 18TA-BLKIT have the rubber lines you want. Then for the brake actuator, the HydraStar...
view full answer... - Recommended Replacement Hubs for EZ Loader Trailer With Disc BrakesThe VIN doesn't give me really any information beyond what you already gave so I reached out to the manufacturer. You have the 3,700 lb axle, but it has the standard 3,500 lb spindle size based on the bearing numbers they gave me for your axle. I recommend the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K if you are just looking for the hub for a rotor to fit over, or # K08-435-05 if you are seeking an integrated rotor. The...
view full answer... - Recommended Wheel And Tire Setup For 3,500Lb Trailer Idler Hub AKIHUB-545-35-G-EZ-KThe Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 # AKIHUB-545-35-G-EZ-K is designed to be used with wheels ranging from 13"-15". The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 # AM3H400 is 10" so it is not recommended to use these two together. The Trailer Idler Hub # AKIHUB-545-35-G-EZ-K will work with your current spindles. For a wheel/tire setup you could go with Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 5...
view full answer... - How to Determine Correct Replacement Hub and BrakesIn order to find the correct replacement hubs for your trailer, you need to first know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You can use the photo...
view full answer...
- Do the etrailer Hub Assemblies for 3,500 lb. Axles Work With Slip on RotorsThe studs on the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles part # AKIHUB-545-35-G-EZ-K are 1-5/16" in length. This is generally a good length for this application. So as long as the slip on rotors you are using require a stud length shorter than that you will be in good shape.
view full answer... - Replacement Hub for UFP Hub H-1062-3The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has # L44649 inner and outer bearings, and a grease seal that has a 1.979" OD and a 1.372" ID You will need to choose the hub based off those bearings and the bolt pattern of the hub for your wheels, but the most likely option is the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles...
view full answer... - Idler Hubs to Replace Drums on 3,500 Pound Axle with 5 on 4-1/2 Bolt PatternWith a 3,500 pound axle with a 5 on 4-1/2 bolt pattern your inner and outer bearings should be parts # L68149 and # L44649. Verify by making sure they have 1.378 and 1.063 inch inner diameters respectively. If these are correct then the correct idler hub depends whether you have E-Z lube spindles or not: E-Z lube use part # AKIHUB-545-35-G-EZ-K Standard use part # AKIHUB-545-35-G-K These are galvanized hubs which are a great option for boat trailers.
view full answer... - Replacement DeeMaxx Disc Brake Kit for a Boat Trailer with 3,500 lb AxleAccording to my research the DeeMaxx Disc Brake Kit # DE62FR will fit your axle just fine. You'll need to use an idler hub like the 3.5K # AKIHUB-545-35-G-EZ-K and swipe out the grease seal with one that has an appropriate inner and outer diameter # 168255TB (1.687" and 2.561" respectively). You'll want to double check this with what you currently have to make sure the bearings and seal dimensions match.
view full answer... - Replacement Idler Hubs For Tandem Axle Boat Trailer With 3,500LB Axles And Front Disc BrakesYour axles should be the same size as long as it was manufactured by a reputable shop. With older and homemade trailers you never know what they might throw on there. I recommend using one of our galvanized idler hubs as they will be more corrosion resistant than the painted hubs. We have the EZ Lube 5 on 4-1/2" # AKIHUB-545-35-G-EZ-K or the Standard 5 on 4-1/2" # AKIHUB-545-35-G-K depending on if you need the removable cap. We also have the Bearing Buddy # BB1980A-SS if you wish to have...
view full answer... - What 5 On 4-1/2 Hub Will Fit The Timbren Axle-Less Trailer Suspension ASR3500S06?The Timbren Axle-Less Trailer Suspension # ASR3500S06 uses the standard # L68149 inner and # L44649 outer bearings. So you can use virtually any standard 3.5K axle hub. For a 5 on 4-1/2 hub we suggest the following options: Idler Hub # AKIHUB-545-35-G-EZ-K Hub and Drum # AKHD-545-35-G-EZ-K If you do need to set it up with electric brakes, we suggest using the above hub/drum, along with the # AKEBRK-35-SA Electric Brake assembly.
view full answer... - Looking For Replacement MasterPro 581750 Hubs On A Yacht Club Pontoon TrailerFrom what I could find, the MasterPro Hub PT581750 you have fits a Dexter #84 Spindle. This is one of the most common spindle available for a 3,500 pound axle, so there are definitely options available for replacements. With that being said, the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 # 84545BX will definitely fit your axle and will be a great replacement. One thing to note though, the diameter of the cap that fits this hub will be 1.986 inches so I recommend...
view full answer... - Replacement Hub For Boat Trailer Using Bearings L68149 And L44649The closest we have is Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K. This uses inner bearing L68149 (1.378" inner diameter) and outer bearing L44649 (1.063" inner diameter) that you currently have. It also has the outer race L44610 that you have. There is not a hub available that has the inner race L68110 that you have which measures 2.327". This kit includes inner race L68111 which measures 2.361". You can stick with your current...
view full answer... - Recommended Disc Brakes for Shoreland'r Boat Trailer Used In Salt Water with 3,225 Lb AxlesThe Kodiak Disc Brake Kit part # K2HR35DS is a great option to replace the disc brakes on a Shoreland'r Boat Trailer. It has dacormet and stainless steel finishes so it will hold up to salt water just fine. The hubs and rotor are integrated into one another which will make for easy replacement. Please note, you'll also need the Bearing Kit for Trailer Brakes part # DBRKHW35EZ to complete the installation.
view full answer... - Replacement Hub for TDE46210I was able to determine from my research that the TDE Trailer Hub part 46210 uses a # L68149 inner bearing, # L44649 outer bearing, and a 171255TB ( part # 58846 ) grease seal. We don't offer TDE hubs but you can use the Trailer Idler Hub Assembly part # AKIHUB-545-35-G-EZ-K which has a grease cap for EZ Lube axles and is an exact replacement for your current hubs.
view full answer... - Replacement Bearing Recommendation for H-1377 Idler HubYour H-1377 hub is for a standard 3,500 lb axle so I recommend replacing it using the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K which comes with the bearings, grease seal, lug nuts, and EZ Lube grease cap.
view full answer...
- Comparing etrailer and CE Smith Idler Hubs for a 3,500 lb AxleThe Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K and the CE Smith Trailer Idler Hub Assembly w/ Case # CE13515 fit the same spindle, have the same bolt pattern, and are galvanized so yes, essentially the only things that separate the 2 assemblies is that the CE Smith comes pre-greased and in a carrying case. If you choose to go with the etrailer option then you'll also need grease like part # L11380 to pack the bearings with. Attached are some videos for...
view full answer... - Replacement Hub/Drum and Brake Parts For a Mobile Home AxleBased on your image it appears you have an old mobile home axle on our trailer. These axles were designed to not be rebuilt and thrown away when they became damaged which is why you saw complete axle assemblies carried as spares on the trucks that hauled the mobile home to its destination. If you can disassemble one of the hubs and measure the spindle and hub for the correct size bearings, races and grease seals I can see if we have anything that will fit your hubs. Otherwise for an exact...
view full answer... - Replacement Hubs for Single Axle Boat Trailer w/ L44649 Outer and L68149 Inner BearingsGiven the bearing numbers and wheel bolt pattern you mentioned, it sounds as if you have a 3500 lb axle, not a 5200 lb axle. I'd recommend confirming the trailer's axle capacity with the manufacturer before replacing anything. The outer # L44649 and inner # L68149 bearings are typically found on a 3500 lb axle, not a 5200 lb axle, and a 5 on 4-1/2 inch bolt pattern is the usual bolt pattern for a 3500 lb axle. If you do confirm that you have a 3500 lb axle, I'd recommend a galvanized...
view full answer... - Option For 2,000 lb or 2,200 lb Axle-Less System For Boat TrailerWhile we have an option for 2,000 lb or 2,200 lb suspension, like you mentioned there is not a straight axle with the measurements you have. What you can do though is use an the Timbren Axle-Less Suspension System, which are simply bolted or welded so you do not have to worry about finding an axle that meets any specific measurements. There are 2,000 lb and 2,200 lb systems: - 2,000 lbs: Timbren Axle-Less Trailer Suspension System # ASR2000S02 - 2,200 lbs: Timbren Axle-Less Trailer Suspension...
view full answer... - Replacement Hubs, Bearings, Races and Grease Seals For a 1983 EZ Loader M80 Adjustable Boat TrailerYou will want to pull apart your hub to confirm the bearings and grease seal used as EZ Loader only had records for trailers going back to 1984. They were able to give me the parts that your 1983 EZ Loader M80 Boat trailer most likely does have. I have included a picture that shows where the numbers are found on these parts, if you cannot make out the numbers you can measure the parts with a Digital Caliper # PTW80157 to confirm the correct fit. Inner Bearing # L68149 Inner Race # L68111 Outer...
view full answer...
- How To Measure A Trailer Spindle To Find Replacement Hubs And BearingsTo make sure you find the right replacement hubs you can do a couple of things. First check out the bearing and see if you can find the numbers for the bearings either etched or stamped on the side of the bearing. If you can not find the numbers you will need to measure the spindle. I have attached a drawing that shows where you need to measure the spindle to find the right replacements. The drawing also shows where to measure for a seal as well. You will also need to measure the inside...
view full answer...
- Recommended Hub To Replace Older Hub With Uncommon 4 on 137mm Bolt PatternI may have another option for you, but we do not offer any hubs with the 4 on 137mm bolt pattern. Instead I recommend replacing your current hubs and wheels to ones that use a more common bolt pattern. To recommend the correct hub you will need to determine which inner and outer bearings your spindle uses. The easiest way to do this is by removing one of your current hubs and looking for the bearing numbers stamped in the face of each bearing as shown in the included picture of the #...
view full answer...
- Recommended Axles And Electric Trailer Brake Components For Custom 50 Wide Tandem Axle TrailerI would be happy to help. The closest 2000lb trailer axle we offer for your 50" wide trailer is the 60" Dexter Trailer Axle Beam with Standard Spindles # T20BTR-6048, but this would only give you roughly 3/4" of frame clearance when used the narrowest 15" wheels we offer which is the Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR C # AM32238B. It is recommended to have at least 1-1/2" clearance between the trailer frame and the tire so I have another...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Kathleen M
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
4/12/2024
I am sorry that these were not the right size. Let me get you over to customer service. They will be asking for your original grease seal numbers, please have those available when they reach out.