Looking For Replacement MasterPro 581750 Hubs On A Yacht Club Pontoon Trailer
Updated 10/12/2021 | Published 10/11/2021
Products Featured in This Question
Question:
I bought a masterpro trailer hub kit part581750 and my grease buddy doesn’t go al the way on and I had to add 2 extra washers to get it tight for the cotter pin to work I bought it at orielys it’s 1,750 lb capacity the number on the hub is 84545 will this hub work my specs on the trailer have worn off
asked by: David S
Helpful Expert Reply:
From what I could find, the MasterPro Hub PT581750 you have fits a Dexter #84 Spindle. This is one of the most common spindle available for a 3,500 pound axle, so there are definitely options available for replacements.
With that being said, the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 # 84545BX will definitely fit your axle and will be a great replacement. One thing to note though, the diameter of the cap that fits this hub will be 1.986 inches so I recommend double checking the diameter of the cap/fitting you will be using to make sure it will fit properly.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 9~123
- Search Results: breakaway kit
- Search Results: 8~285
- Shop: Dexter Trailer Brake Drum for 9,000-lb to 10,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Non-ABS
- Search Results: 36~120
- Search Results: k23~450
- Search Results: 183537 lippert
- Search Results: 8~430
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly - 8,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Dexter Trailer Brake Drum for 9,000-lb to 10,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Non-ABS
- Shop: Yakima Hitch Receiver Reducer Sleeve - 2.5" to 2" - 10" Long
- Shop: Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Shop: Dexter Trailer Brake Drum for 10,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Non-ABS
- Q&A: Replacement Titan Surge Brake Actuator for Model 10 Part 3241639
- Video: The Low-Down on the Optronics Mini Side Marker and Clearance Light
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Replacement Hub and Drum for a Dexter 8-133
- Q&A: Replacement Parts for Dexter Motorhome Axle 8-133
- Shop: Trailer Wiring
- Q&A: Torque Specification for Lugs Nuts on 5/8-Inch Stud on Dexter Hub
- Q&A: Solution For Weight Distribution Hitch That Cannot Use Regular Clamp-On Brackets
- Shop: Roof Rack
- Shop: Brake Controller
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Shop: Trailer Hitch