See what our Experts say about this TruRyde Trailer Bearings Races Seals Caps

• Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
  For idler hubs, you will want the Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 # AKIHUB-545-2-1K or the 4 on 4 inch bolt pattern # AKIHUB-440-2-1K. This is a standard BT8 spindle. I've attached an installation video to assist as well as an article on bolt pattern.
  view full answer...
  
• Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
  A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part # RG06-010, which is a double-lip seal sold as a pair. Its outer diameter is 1.983-inches and its inner diameter is 1.249-inches. These have a spring to maintain a good seal around the spindle.
  view full answer...
• What is Difference Between Grease Seals RG06-010 and 34823
  Hey Marc, the difference between the two grease seals is that the part # 34823 is sold individually and the part # RG06-010 is sold in pairs. Aside from that they are the exact same seal. How many seals are you in need of?
  view full answer...
• Can Trailer Bearing Kit have Grease Seal Swapped Out
  Hey Eugene, we don't have a way to substitute bearing kit components so you'd need to just get the bearings and seals that you need individually. So you would need the seal part # RG06-010 and the bearings part # L44649 and you'd be set.
  view full answer...
• Replacement Grease Seal Options for 2010 EZ Loader Trailer with 2325 GAWR Rating
  We don't have a database showing what replacement parts are needed for different trailers according to VIN or year/make/model but if you can let me know what the weight capacity is for your axle I can give you a guesstimate as to what you'll need - but you'll still need to pull the hub and verify the parts on your end.
  view full answer...
• Looking For Grease Seal With 1.219" ID And 1.979" OD
  Hello Eric, thanks for reaching out. We do have a seal that matches the OD you need, the Double Lip Grease Seal # RG06-010, but this has a 1.249" ID. I am sorry to say we don't have anything with a 1.219" ID. Our records show the 12192TB seal is an older seal number and it has a 1.249-inch ID and 1.983-inch OD. Are you sure this isn't what you need?
  view full answer...
• Determining Which Replacement Bearing, Race, and Seal For Spindle Using 07100 Bearing
  The correct replacement bearing for your Timken 07100 is the # L44643, but to determine the correct race and grease seal you will need to measure your hub. As long as the outside diameter of your current race is 1.980" you will be able to use race # L44610, but for the grease seal you will need to use digital calipers like # PTW80157 to precisely measure the spindle where the grease seal rides and the hub where the grease seal rides as shown in the included diagram. If you can provide...
  view full answer...
  
• Recommended Replacement Inner/Outer Bearings and Grease Seals for a Dexter 2000 lb Axle
  Hey Karl, there is not a complete kit that I'm seeing but it looks like you can just use the Double Lip Grease Seals # RG06-010 for the seals and the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal # BK1-150 for the bearings. This bearing kit does also include a 10-9 seal, which you can just discard since you won't be needing it.
  view full answer...
• Replacement Hub Assembly for a 2004 Rockwood Premier 1907 Trailer
  Hey Michael, thanks for reaching out and providing all of the details! The Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-EZ-2K will fit your setup, but you'll need to swap out the grease seal to match your application. You can use the part # 34823 for a single seal, or the part # RG06-010 for 2 seals. Is there anything else you're needing to replace on your trailer?
  view full answer...
• Replacement Seals for a Jet Ski Trailer Using L44649/L44610 Bearings
  Hey, Kevin. I'm not 100% sure what you mean by better but we do have double lip seals that will work for you. Part # RG06-010 match up to the 1.250" inner and 1.979" outer diameter that you are needing. The thickness of the seal wouldn't matter, as long as the inner and outer diameter matches up.
  view full answer...
• Replacement Grease Seal 4410275 For Shoreland'r Boat Trailer
  Shoreland'r parts are not something that we carry but their numbers are often associated with common parts. The 4410275 is the same as the GS-1250XDL which doesn't come back to anything we have information on. There is a GS-1250DL which matches the # RG06-010 but I believe that is going to be different than the XDL. You could compare this to your current grease seal just to be sure. It has a 1.249" inner diameter and 1.983" outer diameter. We do have a grease seal that is used with a spindle...
  view full answer...
• Trailer Grease Seal to Replace 127194TB
  The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part # RG06-010, which is a double-lip seal sold as a pair. Its outer diameter is 1.983-inches and its inner diameter is 1.249-inches. These have a spring to maintain a good seal around the spindle.
  view full answer...
• Replacement Grease Seal for Shorlandr with Manual that Calls for TCM127194TB
  The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part # RG06-010, which is a double-lip seal sold as a pair and will work for you. Its outer diameter is 1.983-inches and its inner diameter is 1.249-inches. This is the same as the other number you mentioned.
  view full answer...
• Need Replacement Bearings and Seals for my Yacht Club PWC Trailer
  I have the Replacement Trailer Hub Bearing, # L44649, which has an inner diameter of 1.063 inches. If you need the matching race it is part # L44610. Our Double Lip Grease Seals, # RG06-010, have an inner diameter of 1.249 inches and an outer diameter of 1.983 inches. Although we do not offer the items that are compatible with the bearing and seal dimensions that you have given in kit form, they are available individually.
  view full answer...
• Replacement PO1251925TB Grease Seal for Small Boat Trailer
  The closest grease seal we have available to the measurements you provided is the TruRyde Double Lip Grease Seal # RG06-010. This seal has an inner diameter of 1.249 inches and an outer diameter of 1.983 inches. You can use a digital caliper like # PTW80157 to verify these measurements on your current seal. This will come with two grease seals. I have attached a short video review on this product just so you can get a better look at their dimensions.
  view full answer...
• Replacement Hubs and 4.8x8 Tire/Wheel for Older Boat Trailer
  It sounds like your trailer hubs use L44649 bearings so to replace your idler hubs and tire/wheels I recommend the following: - Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-G-EZ-2K (need Qty 2 per axle) - Double Lip Grease Seals # RG06-010 (comes as a pair) - Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel # AM30070 The hub uses the L44649 bearings but you need to swap out the grease seals for the ones that I referenced so the inner diameter matches...
  view full answer...
• Replacement Grease Seal for GS-1250DL
  I have a solution for you, but we do not have a double lip grease seal with the exact measurements you specified. However I was able to find out that the GS-1250 DL that you mentioned has the following measurements: Inside Diameter: 1.249" Outside Diameter: 1.983" It should also be noted that using a tape measure is not an accurate way of measuring any components like bearings, races and grease seals. In the future you'll want to use a digital caliper like the # PTW80157 to get a measurement...
  view full answer...
• Double Lip Grease Seals to Replace Transcom Seal 12192TB
  For an equivalent double-lip grease seal to replace your original part 12192TB you can use part # RG06-010. This is a set of two double-lip seals that are compatible replacements for your original seal. These seals have an inner diameter of 1.249-inches and an outer diameter of 1.983-inches.
  view full answer...
• Single or Double Lip Seals for a Trailer with 12192TB Transcom Seals and Using Bearing Buddies
  You will definitely want to go with a double lip seal if you are using Bearing Buddies because they will prevent blowing out grease from the other side and hold pressure better. Go with seal pair # RG06-010 that you have referenced to get a pair of double lip seals.
  view full answer...
• Trailer Hub Seals with 1.250 Inner Diameter and 1.975 Outer Diameter.
  You would need seal # 34823 or for a pair use # RG06-010. Each of these seals has a 1.249 inch inner diameter and 1.983 out diameter which is within the margin of error and representative of the measurements that you have provided.
  view full answer...
• Replacement Trailer Hub Grease Seal for L44643 Inner and Outer Bearings
  The seal you need is going to be more associated with the inner bearing and race. The outer bearing will help identify other parts but only if I have both bearing numbers. If both bearings are the same then the seal is # 34823 or for a pair use # RG06-010. You will need to pull the hub and get the inner bearing number as well to be sure. These seals measure 1.249 inner diameter and 1.983 outer diameter.
  view full answer...
• Replacement Lug Stud for Dico Trailer Hub Assembly 45263
  The best option we can offer you is the Trailer Idler Hub Assembly part # AKIHUB-545-2-EZ-2K which will be a direct replacement for the Dico Trailer Hub Assembly part 45263 so long as you the Double Lip Grease Seals part # RG06-010. The Trailer Idler Hub Assembly would also allow you to switch from oil to grease which is much easier to deal with in regards to maintenance. The only way to find the correct replacement lug stud for the Dico Trailer Hub Assembly would be to measure and then...
  view full answer...
• Replacement Grease Seal for Use with Bearing Buddies
  I believe you will want the Double Lip Grease Seals (pair) # RG06-010 these have the closest diameter to what you gave me. They have a 1.249 inch inner diameter and a 1.983 outer diameter to fit common BT8 spindles. They will be compatible with Bearing Buddies like you mentioned. If you want the bearing kit for the BT8 spindles, I recommend # BK1-100. The bearings are just # L44643.
  view full answer...
• Replacement Bearings And Seals For A CE Smith Multi Sport Plus Boat and Kayak Trailer CE48870
  Hi Michael! The CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks - 12" Wheels - 14' Boat - 800 lbs # CE48870 uses the fairly standard and easy to find # L44649 bearing (inner and outer) and # RG06-010 seals. With that said, you can either use just the bearings, or we do actually have the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased # CE13311. This includes the hub as well as the pre-greased bearings already installed, so it does...
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?