Replacement Grease Seal for GS-1250DL
Published 03/28/2020
Products Featured in This Question
Question:
got a grease seal with the following part number. TRP GS-1250 DL . what do you have that i can use to replace it? tape measurement says 1.25 ID and 2.0 OD.
asked by: Craig
Expert Reply:
I have a solution for you, but we do not have a double lip grease seal with the exact measurements you specified. However I was able to find out that the GS-1250 DL that you mentioned has the following measurements:
Inside Diameter: 1.249"
Outside Diameter: 1.983"
It should also be noted that using a tape measure is not an accurate way of measuring any components like bearings, races and grease seals. In the future you'll want to use a digital caliper like the # PTW80157 to get a measurement that will give you accuracy down to the thousandth decimal place.
The TruRyde grease seal # 34823 is a double lip seal that has an inner diameter of 1.249" and outer diameter of 1.983" and will be a direct replacement for the GS-1250 DL that you found in your hubs. These can also be purchased in a pair with part # RG06-010.
Product Page this Question was Asked From
Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: 4 way trailer plug
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Search Results: rm676
- Search Results: air lift
- Search Results: air lift gauge
- Search Results: jack handle
- Search Results: replacement jack handle
- Search Results: torsion arm
- Shop: Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 - Qty 1
- Shop: Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs
- Shop: Dexter DB-35 Single-Wheel Disc Kit - 10" Zinc Rotor - 5 on 4-1/2 - 3.5K - 1-3/8" Spindle
- Shop: Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 1,500 lbs
- Video: Checking Out the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs
- Shop: Double Lip Grease Seals (pair)
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Video: A Closer Look at the Dexter Oil Hub for 9K to 10K General Duty Axles
- Video: Review of CE Smith Trailer Axles - Axle Spindle Parts - CES52QR
- Video: A Closer Look at the Double Lip Grease Seals (pair)
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearing Kit 1-1/16 Inch BTR Spindle - DX59UR
- Video: What to Know About the Trailer Hub Assembly
- Video: An In-Depth Look at the Timken Grease and Oil Seal
- Q&A: Recommended Bearing Kit for 1-1/16" BTR Spindle
- Q&A: How to Choose Correct Replacement Trailer Idler Hub
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Q&A: Do I Need to Have a Castle Nut or Cotter Pin to Keep Spindle Nut From Backing Off
- Q&A: How Far in a Trailer Hub Should the Grease Seal Go
- Q&A: Does Grease Seal Thickness Matter More than Inner and Outer Diameter
- Q&A: Bearings And Seals For Superior 1510-L Trailer With 2,000 lb GVWR
- Shop: Trailer Hitch
- Shop: Roof Rack