Double Lip Grease Seals to Replace Transcom Seal 12192TB

Question

Question:

my EZ loader 1994 14-17-2000 trailer straight spindles uses 2 - 1and1/16in wheel bearings I need new grease seals old seal say : 12192TB which seals do you have to match these?

asked by: Mario

0

Expert Reply:

For an equivalent double-lip grease seal to replace your original part 12192TB you can use part # RG06-010. This is a set of two double-lip seals that are compatible replacements for your original seal. These seals have an inner diameter of 1.249-inches and an outer diameter of 1.983-inches.

expert reply by: Adam R

0

Answer 1

The hubs that come with the #e82GR axle are packed with a Lithium complex multipurpose grease. It is safe to add marine or equipment grease, as long as it is another Lithium Complex grease. We recommend using something like the Timken Hi-Temp Red…

view full answer...

Answer 2

The grease for the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles #34822545BX is a lithium grease like the Dexter Multi-Purpose Lithium Grease #DX64TR. The hub comes pre-greased so you do not need at add any more when installing. Then in…

view full answer...

Answer 3

The grease used on The Dexter Trailer Idler Hub Assembly #34822545BX, is The LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge #L11465. This grease resists high temperatures, and has a drop point of 520 degrees F.…

view full answer...

Answer 4

I was unable to reference a spindle with the number BT151; the best I could find in reference to BT151 is a hub kit for an E-Z Loader trailer, though it did not mention the specific bearings it used which would help identify which spindle you need.…

view full answer...

Answer 5

The trailer hub assembly, part number, 34822545BX, comes with the race attached to the hub. The seal and bearings are not attached. Those parts must be assembled and packed with grease prior to installing the cap. I have attached a FAQ sheet for…

view full answer...

Answer 6

If both the inner and outer bearings on your trailer spindle are part #L44643, the #8-258BTUC1 would work well for you. This is a hub assembly that works with 13 to 15 inch wheels and has a 5 on 4-1/2 wheel bolt pattern. This assembly includes…

view full answer...

Answer 7

The LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications part #L11465 has a petroleum base so as long as the grease you are wanting to mix this with also has a petroleum base there should not be any issues. If it uses any other base…

view full answer...

Answer 8

The Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 #34822545BX which is a fit for 8 inch to 12 inch wheels. The Trailer Idler Hub Assembly - 2K E-Z Lube Axle - 13" to 15" Wheel - 5 on 4-1/2 - PreGreased…

view full answer...

Answer 9

According to my research Victor 47376 grease seal has an inner diameter of 1.218 inches and an outer diameter of 1.983-inches. The seal we offer nearest to those dimensions is part #34823 as a single seal or part #RG06-010. These have matching outer…

view full answer...

Answer 10

If the bearings are good and the hub is greased properly that basically limits the issue to the brakes. How much drag can you feel as you turn the wheel by hand with the trailer jacked up in the air? It should feel like a light drag and turn easily.…

view full answer...

Answer 11

You can use the red grease #L11390 for trailer wheel bearings if you wanted. You can also use wheel bearing grease #L11465 which is designed for use on trailer running gear, including wheel bearings. It also has a slightly higher temperature rating,…

view full answer...

Answer 12

When you say "Slack" what exactly do you mean? It is normal and required for the bearings to have some slack to allow the wheel to turn without too much friction, and you should be able to rock the hub back and forth and feel slight…

view full answer...

Double Lip Grease Seals to Replace Transcom Seal 12192TB

Product Page this Question was Asked From

Continue Researching