Replacement Hub Assembly for a 2004 Rockwood Premier 1907 Trailer
Updated 08/15/2025 | Published 07/22/2025
Products Featured in This Question
Question:
Hello, Writing to confirm the fit of a hub assembly on my camper 2004 Rockwood Premier model 1907. Part number I am looking at is AKIHUB-545-2-EZ-2K. Trailer details: GAWR 2100 LB, 12 wheels with 5x41/2 bolts, 1 spindle with EZ lube, L44649/10 inner and outer bearings, double lip grease seal ID 1.249/OD 1.983 My main concerns are that I dont know the axle manufacturer and maybe the grease seal isnt the right fit? Thanks for the help!
asked by: Michael T
Expert Reply:
Hey Michael, thanks for reaching out and providing all of the details!
The Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-EZ-2K will fit your setup, but you'll need to swap out the grease seal to match your application.
You can use the part # 34823 for a single seal, or the part # RG06-010 for 2 seals.
Is there anything else you're needing to replace on your trailer?
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Availability Of Replacement Hub For Dico 45263
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Identify Needed Replacement Hubs for Adams Manufacturing Drift Boat Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing Trailer Tire Sizes ST145/80R12 and 5.30-12
- Q&A: Looking For New Hubs For Snowmobile Trailer
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Steel vs. Aluminum Ball Mounts
Jon G.
8/15/2025
Hey Michael, did swapping out the grease seal work for your camper? I'm asking because I want to make sure others with a similar setup can get the right fit too!