1. Vehicle Suspension
  2. TorkLift
  3. Pads
  4. Rear Axle Suspension Enhancement
  5. Heavy Duty
  6. Overload Pads
TorkLift StableLoad Suspension Upgrade w Quick-Disconnect - Lower Overload Springs - Stainless Steel

TorkLift StableLoad Suspension Upgrade w Quick-Disconnect - Lower Overload Springs - Stainless Steel

Item # TLA7310S
lowest price pledge
Our Price: $378.99
You Save: $19.00
Vehicle Suspension

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 11 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing. Lowest Prices for the best vehicle suspension from TorkLift. TorkLift StableLoad Suspension Upgrade w Quick-Disconnect - Lower Overload Springs - Stainless Steel part number TLA7310S can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (238)
  • Q & A (31)
  • Photos
  • Why etrailer?

TorkLift Vehicle Suspension - TLA7310S

  • Pads
  • Rear Axle Suspension Enhancement
  • TorkLift
  • Heavy Duty
  • Overload Pads

Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.


  • Dramatically improves handling by pre-activating your vehicle's factory lower overload springs
    • Helps to evenly distribute weight, ensuring that truck stays level for better handling
    • Reduces side-to-side sway and body roll
  • Angled structure maximizes contact surface for more effective support
    • Tapered wedge fits between curved springs better than a flat pad
  • Adjustable design lets you modify each StableLoad to fit perfectly in the gap between your truck's rear springs
    • Wedge packs can be taken apart so you can remove one or more of the contact pads
  • Quick-disconnects let you easily return to original ride when you're not towing or hauling
    • Wedge pack is on a hinge mechanism so StableLoad can be pivoted in or out of engagement
    • 3/8" Ratchet extension and ratchet (not included) required for activation
  • Stainless steel construction protects against the elements - ideal for any climate
  • Compatible with aftermarket air bag suspension upgrades
  • Custom-fit for your vehicle
  • Simple, do-it-yourself installation
    • StableLoad units bolt onto the ends of each overload spring
    • No drilling required
  • Kit includes 4 StableLoad units and necessary hardware
  • Made in the USA
  • Lifetime warranty

Enhancing Factory Overload Springs

The lower factory overload springs on your truck are designed to help compensate for a large payload. When you are hauling a heavy load, your truck's standard leaf springs can't always counteract the weight of it. As a result, if you hit a bump when your suspension is fully loaded, the leaf springs will give and cause your truck to bottom out. The overload springs help keep this from happening by mounting beneath the leaf springs to provide points of contact for the stressed springs.

Gap Between Standard Leaf Spring and Lower Overload Spring

There is natural gap between your truck's standard leaf springs and its lower overload springs. This gap allows the upper leaf springs to flex a bit before making contact with the overload springs, but having this gap creates a situation where bounce (or jounce) often occurs. StableLoads are designed to fill the gap between your standard springs and your overload springs. This pre-activates the overload springs, ensuring that they are engaged from the start instead of engaging only when your leaf springs make contact, at which point you've probably already felt the jarring.

StableLoad Suspension Enhancement and Aftermarket Air Bags

By enhancing your lower overload springs in the way described above, you will notice less sway and body roll. This is due to the pre-loading effect of the StableLoads, which helps to better distribute the weight of your payload over the entirety of your factory suspension. This is the primary difference between StableLoads and many air bag overload systems.

With air bag suspension enhancement, the load in your truck is being taken on by the air bags. Air bags are designed to level your truck, and they operate as intended when they're under a normal load. But if you are hauling or towing a particularly heavy load, this type of suspension enhancement can create some problems. In order to get the correct amount of leveling and to ensure that your suspension won't bottom out, you will likely have to fill the air bags to a very high psi. Doing this effectively removes the load from your factory suspension. As a result, your truck's suspension is no longer able to operate as it was designed. This can lead to handling issues, such as porpoising, sway, or body roll.

If you currently have this problem with your air bag system, you can add StableLoads to your suspension and get the best out of both products. StableLoads are effective on their own, but they've also been tested with aftermarket air bag suspension systems. The two enhancements work particularly well together if you have a heavy payload. By installing StableLoads between your lower overload springs and your standard leaf springs, you are already adding support to your suspension to help prevent bottoming out, which air bags work to prevent as well. As a result, you won't have to fill the bags nearly as full, which means that they won't take as much of the load off of your factory suspension, thus allowing your suspension to function as designed - only better.

Quick Disconnect

TorkLift Fortress Propane Tank Lock

These StableLoads can be quickly and easily engaged and disengaged. The quick-disconnect design allows you to pivot the wedge pack - the piece that sits between the springs - in and out of position with a standard ratchet and 3/8" extension (not included). As a result, you can get a stable load when you're weighted down and then return to your regular ride when you're done hauling.

Tested and Proven Winner

TorkLift's StableLoads were tested against vehicles with no suspension enhancement and vehicles with air bags that were inflated to 100 lbs; and the results are clear. By adding StableLoads to your suspension your vehicle will ride smoother, causing less wear and tear on your suspension and tires. The trucks that were tested were loaded with 2,800 lbs. The degree of movement was then recorded, using an inclinometer, when the trucks encountered the 3 most common types of handling problems: side-to-side sway, porpoising, and body roll.

Preventing Side-To-Side Sway

Side-to-side sway is triggered when your vehicle encounters uneven ground, such as a pot hole, and the suspension gives way when it cannot counteract the weight of the heavy load being carried. This creates a side-to-side bouncing motion. As you can see in the graph above, air bags provide an advantage over no suspension upgrades. But the StableLoads offer dramatic improvement over both the standard suspension and the air bag suspension.

Preventing Porpoising

Porpoising is the rising and falling action your vehicle makes when driving over an object like a speed bump. Having too much bounce can make you feel like you're riding in the back of a school bus. As you can see in the graph, there is virtually no difference in porpoising between trucks with standard suspension systems and those with air bags. Only the StableLoad offers improvement for this type of problem.

Preventing Body Roll

Body roll occurs when your heavy load transfers unevenly as you navigate a turn, causing one side of your vehicle to lean dramatically. In some cases this can lead to your truck's tires coming off of the ground and it could even cause your vehicle to roll over if it is too top heavy. Again, according to the graph above, air bags offer no help with this problem. It is only with the StableLoads that stability improves.

A7310S Tork Lift Stable Load Suspension Enhancement - No Drill - Stainless Steel

This Product Fits The Following Vehicles

Customer Reviews

TorkLift StableLoad Suspension Upgrade w Quick-Disconnect - Lower Overload Springs - Stainless Steel - TLA7310S

Average Customer Rating:  4.7 out of 5 stars   (238 Customer Reviews)

Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.

- TLA7310S

The stable loads function as advertised. By engaging the overload spring the rear of my truck has almost zero squat when I load my camper. I belong to several online camper forums. Most of the members seem to push air bag, but constantly complain issues. The stable loads have functioned well and my trucks suspension works as designed.

- TLA7310S
2016 Ford Edge

I would rate this product five stars other than a couple of minor, somewhat cosmetic issues. All of the Stableload components fit perfectly. This issue I had was that on every base plate at the end where the rubber grommet goes in is a manufacturing "ridge" left in the edge of the plate. It is very sharp and on every plate I needed to file off that sharp imperfection that could have resulted in a bad cut while handling it. The other very minor issue was one of the 3/8"x1 1/4" bolts somehow cross threaded itself in the middle of the bolt when tightening so I had to go buy another SS bolt and nut at the hardware store to complete the project.

- TLA7310S
GMC Sierra

I used the product to level 3/4 Sierra and counter trailer tongue weight. A perfect solution. Easy to install and obviously durable.

- TLA7310S

Absolutely excellent, would but again and I recommend. They engage your overloads dinner and the truck corners and handles loads Joe it sold have from the factory!

- TLA7310S

Love this product! Works exactly as advertised and you don’t have to worry about screwing around with airbags. Simple and ingenious. Recommended them to a couple of buddies who love them too.

Have used this product for a year now. Would not put a load on my F150 without engaging the Torklifts as they help that much and provide a great deal of confidence. I spent the extra money for the stainless version and would do it again.
Gene - 07/26/2021

- TLA7310S
Ford F-250 Super Duty

We have a F-250 with a 3000lb truck camper. The stable load made a significant improvement to the ride. Cornering was especially better.

- TLA7310S

Some of the bolts are already rusting. When not engaged on my 2016 3500, the leaf springs still come into contact with the bolt head too (has flattened some of them) and makes a crappy clanking sound going over bumps). The product itself does help the stability when my truck camper is loaded, however, I’m still surprised that after 1 year they are already starting to rush.

- TLA7310S

In the past I have used airbags to haul my Lance camper. I purchased the upper and lower Stableloads, and like them better due to side to side motion, plus they are less expensive.

- TLA7310S

Great product and company! Solved all my issues with stability and truck leveling under a heavy load. Product was in stock and shipped very fast. I love how every product has a video, product pictures, and real pictures of products installed!

- TLA7310S
Ford F-150

I put it on a F150 for hauling a slide in camper. But sold the slide in and got a bumper pull. Even without the equalizer hitch , these held the back up pretty good. Without them it would have dropped about another inch in the back. I tried it both ways. While we had the slide in, it took alot of the boat in the water feeling away in turns. It was a good investment.

- TLA7310S

All parts had sharp points and edges left from water jet cutting. I had to file out some of the holes to get the bolts to fit. Other than that they installed fairly easy and work very well.

- TLA7310S

I was totally amazed how much better my truck handled with my truck camper on it. these torklifts work exactly the way they said they would.

- TLA7310S

Simple install, even more important all my questions were answered quickly.excellent service.

- TLA7310S

Does a great job and is a economical option to airbags for my lifted truck where due to the amount If lift the airbag option was customized and costly. This option greatly improved my towing.

- TLA7310S

Way better than airbags, easy in/out for when your loaded vs. Unloaded.

- TLA7310S
2016 Ford F-250 Super Duty

I have a 2016 F250 and tow a 5th Wheel. Once I put these on the ride was better and most of all the little bit of sagging I had on the bed was totally gone. Thousands of miles later the ride is still fantastic.

- TLA7310S

Got the TorkLift StableLoad Lower Overload springs in November 2019. They worked great with my 2013 Ford F-150. They corrected a sagging problem with the stock suspension while pulling a 31’ travel trailer. Leveled the truck & trailer very well. Used them for several thousand miles; sold them a couple of weeks ago on eBay & got 2/3 of my money back after selling my F150; replaced it with a new F250.

- TLA7310S
2006 Chevrolet Silverado

Worked as claimed. Easy to install on my 2006 Silverado 2500. I have a 17' Cabover that sits up quite high. StableLoad really helped with my ride.

- TLA7310S

I installed these on a 2016 F-350 short-bed crew cab pickup truck, on which I often carry a Lance 855S which nominally weighs about 3,000 pounds. I expected them to reduce side-to-side sway, which was a non-trivial issue in our travels, especially in gusty crosswinds at highway speeds. So, they DO in fact make a perceptible positive difference in the way the truck rides and handles under load. That said, the nature of the leaf springs on the F-series trucks from about 2010 onward severely limits the potential utility of the whole StableLoad concept. Why? Because there's hardly any space between the bottom (short) leaf and the next (full length) leaf! If you don't have some easy way to lift the truck off the axle (AirLift shocks or a pair of really tall jacks), you can only fit ONE of the StableLoad's 3 wedges into place. So, instead of adding 3/4" (3 wedges) to the point at which the bottom short leaf engages, you can only add 1/4" (1 wedge)! That one wedge makes a perceptible but not very significant difference in the truck's handling under load. So, I'm not sorry I did it, but I DID expect A LOT more benefit per dollar spent and per hour invested in installation (a soap opera for another time; make sure you have a 4' pry bar before you start the work) than I actually got.

- TLA7310S
2020 Ford F-150

Our setup: Truck - 2020 Ford F150 with heavy duty tow package. Travel trailer 600 lb. + tongue weight and 4,800 lbs dry weight and Anderson No-Sway Weight Distribution hitch. Purchased all late May 2020 and took a number of relatively short camping trips and found the front end of truck to feel light which affected steering and front end sway. Had a 3,000 mile Yellowstone trip planned for early September 2020 but considered cancelling it due to what I felt to be an unsafe handling situation. Semi's would really pull and push our setup when passing us. After researching towing issues and products we choose TorkLift StableLoad Suspension upgrade. After installation we took a couple of late August trips to test the results. I was amazed on how much improvement theses small devices made in handling and stability. We took our Yellowstone trip and all went well. No concern over handling so we felt so much safer than prior to installation. In all honesty, if the handling had not improved we would have cancelled our long journey. What we learned through our experience is that it is so much about reducing rear-suspension sag. The TorkLift upgrade did in fact significantly reduce that sag which put weight back on the front suspension thereby improving steering and handling. Once installed the TorkLift devices are simple to engage and disengage. Note, that this review and our experience includes the use of a weight distribution hitch which I consider essential to a complete travel trailer towing package. Our only suggestion is that the installation instructions were of better quality. Not much to ask considering the price of the product (but well worth the $$ given the results).

- TLA7310S
Ford F-350 Super Duty

My truck camper weighs 3300 lbs. and I have excellent handling with no roll or bounce on my F350. .

- TLA7310S
2016 Ford F-350 Super Duty

Order arrived quickly and everything was as ordered. Installed today with ease.

- TLA7310S

Item was extremely easy to install . Take the time to watch the installation videos [online] or request the video from torklift. I advise assembling everything prior to going to the vehicle. I have yet to haul with the Stablelifts engaged but can already tell a difference in handling.

- TLA7310S
Ford F-350 Super Duty

I received the stainless steel version to avoid corrosion. A well built, sturdy product. On my F350, I had to do quite a bit of jacking and use of crowbar to get it in. I haven't towed with them yet and they do not change the ride by leaving them engaged. This should solve the porpoising problem we have towing a fifth wheel trailer.

- TLA7310S

These things were very pricey but come really well recommended so I bit the bullet and ordered them. The alternative was having an RV shop install an entire system of air bag suspension. Torklift makes these and I ordered the more expensive set which is all stainless steel but considering where it gets bolted under your truck its worth not having everything frozen with rust a year later. The instructions were actually very poor on this item but it was simple enough to figure out on my own although I had to call Torklift twice. I was done in an hour or two and it works perfectly.

Show More Reviews

Ask the Experts about this TorkLift Vehicle Suspension

  • TorkLift StableLoad Vs. Timbren for 2020 Ford F-350 Super Duty
    I talked to some of our guys down in our installation bays and based on the feedback I received, I definitely recommend the Timbren Suspension Enhancement System # TFR350SDJ for your 2020 Ford F-350 Super Duty. The TorkLift StableLoad # TLA7310S work by engaging your factory lower overload springs earlier than they would otherwise, which minimize sway and assist you when hauling heavy loads. However, disengaging this system requires you to get under the truck and use a rachet (not included)...
    view full answer...
    Image 1 for
  • Differences in Torklift StableLoad Systems And Will They Replace Airbags
    I wouldn't say that the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect # TLA7310S takes the place of an airbag system and they can definitely be used together with a system like the Firestone Ride-Rite Air Helper Springs # F89ZR. This StableLoad kit simply engages your overload springs sooner, which will help reduce sway. Some differences between these solutions are that airbags are easily adjustable and can adjust side to side to support off center loads. The StableLoads...
    view full answer...
  • Does the TorkLift StableLoad Suspension Upgrade Require Drilling On a 2020 Ford F-250
    The TorkLift StableLoad Suspension Upgrade w Quick-Disconnect part # TLA7310S which are a fit for a 2020 Ford F-250 Super Duty would require drilling if you didn't have any pre-drilled holes on the lower overload springs which appears to be the case. I'd suggest the Air Lift LoadLifter 5000 Air Helper Springs part # AL76KV for a no-drill option which gives you much more control.
    view full answer...
    Image 1 for
  • Best Suspension Enhancement for 2004 Chevy Silverado 2500HD to Prevent Sway with Camper
    The best suspension enhancement we have that fits your 2004 Chevy Silverado 2500HD that will reduce sway is the Roadmaster Active Suspension system part # RAS4611. This is the best system we offer for additional support and for reducing sway.
    view full answer...
  • torklift component questions
    I have a couple of suggestions for you but you are really doing good on your kit so far. The TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1111-30 is what you want for the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear part # TLR3510 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front part # TLD2141 are a confirmed fit so to this point you are golden. For the suspension upgrades what you have will work. Using the TorkLift StableLoad Suspension Upgrade...
    view full answer...
  • Which Torklift StableLoad Kits Fit 2014 Ford F-350
    We have the TorkLift StableLoad kit part # TLA7310S that fits your 2014 Ford F-350 as well as the # TLA7311S that you also mentioned. We actually had the chance to install this kit on a 2018 Ford F-350 which I attached an install video for you to check out as well.
    view full answer...
  • What Size Drill Bit is Needed for TorkLift Stableload
    I spoke to TorkLift and the holes needed for the # TLA7310S will be 7/16". With leaf springs being a hardened steel, it is suggested that a harder drill bit is used. We do actually have # TLA7311S that would come with two 7/16" cobalt drill bits that would solve this issue.
    view full answer...
  • Thickness of TorkLift StableLoad Suspension Upgrade
    I had the # TLA7310S pulled from stock, and found that the thickness of the spacers that sit between the lower overload spring and the bottom of the spring pack is 7/8 of an inch which is the same for the fronts and rears. I've linked to an installation video that you might find helpful.
    view full answer...
    Image 1 for
  • Best Suspension Enhancement for 2021 Chevy Silverado 2500
    The best suspension enhancement we offer for your 2021 Chevy Silverado 2500 is the Roadmaster Active Suspension kit part # RAS3611-HD which will give you the support you want but also improves handling and ride quality. Most similar kits to this actually make the ride quality rougher so this would be the best option.
    view full answer...
  • Which Torklift StableLoad Fits 2020 Ram 3500 Dually and Does Not Require Drilling
    The correct Torklift StableLoad fit for your 2019 Ram 3500 dually is the part # TLA7310S and does not require drilling.
    view full answer...
  • What is Purpose of Lateral Angle on Torklift StableLoad Suspension Enhancement
    The lateral angle of the Torklift StableLoads part # TLA7310S is designed to make engaging the system a bit easier, but as you can see in the picture I attached when they are engaged the support is across the entire overload spring. I also attached a review video for the kit for you to check out as well.
    view full answer...
    Image 1 for
  • Clearance Required To Install TorkLift StableLoad on 2004 GMC Sierra Denali
    We measured the TorkLift StableLoad # TLA7310S and found that from the center of the mounting hole to the furthest edge is 3-5/8 inches on one side, and 2-1/8 inches on the other side. To determine if the StableLoad will clear your Quadrasteer components on your 2004 GMC Sierra, measure from the center of the factory lower overload spring, out the same number of inches I mentioned above, this is the space that will be taken up by them. It is important that the StableLoad has at least 1...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Is Drilling Required to Install Torklift StableLoad # TLA7310S in 2018 Ford F-350
    For your 2018 Ford F-350 the TorkLift Stable Load # TLA7310S that you referenced does not require drilling as long as the overload springs are pre-drilled. If not, they can be pre-drilled.
    view full answer...
  • Does Torklift StableLoad and Roadmaster Suspension System for 2018 Chevy Silverado Do Same Thing
    The TorkLift StableLoad Suspension Upgrade # TLA7310S that you referenced basically allows the overload springs of the vehicle suspension to engage sooner to gain additional suspension support whereas the Roadmaster Active Suspension kit # RAS4611 basically is like adding an additional leaf spring to the setup. They both provide additional support so in a way they perform the same function but they do it in a different way. I would not recommend both at the same time though as that would...
    view full answer...
  • Recommended Suspension Enhancement for Lowered 2018 GMC Sierra 2500
    The best suspension enhancement option we offer for a lowered 2018 GMC Sierra 2500 is the TorkLift StableLoad Suspension Upgrade part # TLA7310S. The StableLoads are a direct bolt-on upgrade that can be adjusted and will work well to provide support while towing or hauling. The StableLoads installs under the lower overload leaf springs so there won't be an issue with any lowering components such as drop shackles. There are unfortunately no air bags that will work with the drop shackles...
    view full answer...
  • TorkLift TLA7310S StableLoad Suspension Upgrade Kit Fit on 2021 Chevy Silverado 3500 Diesel Dually
    As long as your 2021 Chevy Silverado 3500 Diesel Dually has lower overload springs, the # TLA7310S TorkLift StableLoad will work great for you. I've linked to an installation video that you might find helpful. The StableLoad is a no drill application, and the nice thing about this system is you can easily disconnect it to return your ride to normal when you're not towing or hauling.
    view full answer...
  • Rear Suspension Enhancement For A 2017 Ford F-150 With A 6" Lift
    There are a few different options for your 2017 Ford F-150. In my opinion I would go with Item # TLA7310S. These are going to be the easiest to install and use. When towing and you add weight, the spring pack flattens which then your overload spring takes over for support. When the spring pack flattens it causes the back of the vehicle to squat because of the gap between the spring pack and overload springs. After installing the StableLoad you simply spin the plates into place on the...
    view full answer...
  • Could Torklift StableLoad and RAS System Fit Together on 2015 Ford F-150
    The Torklift Stableload part # TLA7310S will physically fit with the RAS system part # RAS3611-YHD that fits your 2015 Ford F-150 as they two kits would not interfere with each other. If you have the RAS system maxed out and are wanting even more support I'd be worried that you'd be over the capacity of the truck.
    view full answer...
  • Recommended Camper Tie Downs for 2020 Ford F-350 with Extended Running Boards
    You're actually on the right track, here. The TorkLift Custom Frame Mounted Tie Downs # TLF2021 and # TLF2021A (aluminum) are a confirmed fit through TorkLift for the 2020 F-350 with the running boards that extend past the cab of the truck. Since these are available you'll be able to go ahead and order those extended running boards. For rear tie downs, you'll want to use the # TLF3008 or # TLF3008A (aluminum), which are also confirmed for your new truck. If you also need turnbuckles...
    view full answer...
  • Suspension Enhancement Recommendation for a 2020 Ford F-150
    If you're looking to add some suspension enhancement that can be disengaged without completely uninstalling it then I recommend going with the TorkLift StableLoad which is available with the standard powder coat # TLA7310 or as stainless steel # TLA7310S. These will work to prematurely engage the lower overload spring on your 2020 Ford F-150 so that you get more help for your suspension quicker. The only way you won't see a benefit from this is if you are already at your max towing...
    view full answer...
  • Is the Timbren Suspension System Or Torklift Stable Load Better for 2020 Ford F-350 With Rear Sag
    I recommend to use the Timbren Suspension Enhancement System - Rear Axle part # TFR350SDJ which will give you more stability to reduce rear sag. The springs provide the additional support under heavier loads that your factory suspension cannot provide. The TorkLift StableLoad Suspension Upgrade w Quick-Disconnect part # TLA7310S does help to support the lower overload springs and eliminate body roll but they won't fix the rear sag.
    view full answer...
  • Will SumoSprings Rebel Helper Springs And TorkLift Stable Load Kit Prevent Sag Of 2020 Ram 3500
    You have a pretty good plan of what you will need to support the suspension of your 2020 Ram 3500 SRW 4x4 Long Bed when carrying your truck bed camper and towing a 10000lb trailer. The SumoSprings Rebel Custom Helper Springs - 2 Piece # SSR-301-47-2 are a great choice as they offer up to 4600lb of support when needed and will not negatively effect your unloaded ride. Adding the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect - Lower Overload Springs - Stainless Steel # TLA7310S...
    view full answer...
  • Recommended Suspension Enhancement for 2016 Ford F-150 Towing 6500-lbs Travel Trailer
    I recommend using the Roadmaster Active Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty Item # RAS3611-YHD because they're going to provide you with a system that turns your standard leaf springs into a mechanically active suspension. This will help increase stability, handling, and control by improving traction and reducing sway for an overall better ride quality when towing and when you're unloaded. They also don't require anything once they're installed, unlike the TorkLift...
    view full answer...
  • Recommended Rear Suspension Enhancement For 2019 Ford F-250 4WD W/ Truck Bed Camper
    Since the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F89ZR and the helper springs like the # SSR-127-54 install at the same spot you will only be able to install one of them on your 2019 Ford F-250 4WD, but you will also more than likely need just one of the two. I recommend going with the # F89ZR as it offers 5000lbs of load leveling support which is plenty since you mentioned your Lance truck bed camper is around 3700lbs, and it is adjustable allowing...
    view full answer...
  • Do SuperSprings Replace Factory Springs on 2019 Ford F-450 With Factory Upper Overload Springs
    Those are good questions, and the SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA25 will not replace the factory springs on your 2019 Ford F-450, they work in tandem along with your springs, which will not be removed. These are absolutely going to improve your ride because they can be customized for your application whether that means you have a constant heavy load and need constant support or simply want to get a more balanced suspension if you tow or have a heavy...
    view full answer...
  • Best Rear Suspension Enhancement Option for Body Roll, Sway and Porposing on 2019 Ford F-150
    Both the TorkLift # TLA7310S Stainless StableLoad and the RAS # RAS3611-Y would absolutely help with the body roll in turns, porpoising and sway caused by crosswinds. Both systems are very highly rated by our customers. I'd agree that air helper springs work best on loads carried in the truck bed. Although I don't have head to head testing to provide you with, I'd recommend going with the StableLoad. The system can be easily engaged and disengaged using a ratchet and extension. The...
    view full answer...
  • Air Bags For a Lowered 2009 Chevrolet Silverado 1500
    With your 2009 Chevrolet Silverado lowered 3" in the back Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle Item # F2430 are not going to work. I contacted Firestone to be sure and they do not offer any airbag system for lowered vehicles. There is an option to add TorkLift StableLoad Suspension Upgrade w Quick-Disconnect - Lower Overload Springs - Stainless Steel Item # TLA7310S. This kit attaches to your lower overload spring and each plate can be turned under...
    view full answer...
  • Will BetterWeigh Mobile Tongue Weight Scale Work With TorkLift StableLoad on 2018 Ford F-150
    Yes, the BetterWeigh Mobile Tongue Weight and Payload Scale for OBD II # C51701 is absolutely compatible with the TorkLift StableLoad Suspension Upgrade that fits your 2018 Ford F-150. The StableLoad that fits your truck is: - TorkLift StableLoad Rear Suspension Upgrade with Quick-Disconnects - Stainless Steel # TLA7310S - TorkLift StableLoad Rear Suspension Upgrade with Quick-Disconnects # TLA7310 The only difference between these two parts is the stainless steel construction...
    view full answer...

Do you have a question about this Vehicle Suspension?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality vehicle suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate vehicle suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Kathleen M
Installed by:
Kathleen M
Employee Shane H
Test Fit:
Shane H
Employee David F
Test Fit:
David F
Employee Jonathan Y
Video by:
Jonathan Y
Employee Kristina F
Written by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.