bing tracking image
  1. Power Inverter
  2. Victron
  3. 1200 Watts
  4. Pure Sine Wave
  5. 24V
  6. Inverter Only
Victron Phoenix VE.Direct Inverter - NEMA GFCI - 1,000 Watts - 24V - UL Listed
Victron

Victron Phoenix VE.Direct Inverter - NEMA GFCI - 1,000 Watts - 24V - UL Listed

Part Number: VN44RR
In Stock
$362.10
Retail:$426.00
You Save: $63.90
Power Inverter
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Running a TV, CPAP, or small appliance off a 24V battery gets unpredictable with cheap inverters. This unit delivers 1,000 watt pure sine power through a GFCI outlet, so connected gear runs cleanly without unexpected shutdowns. Great Prices for the best power inverter from Victron. Victron Phoenix VE.Direct Inverter - NEMA GFCI - 1,000 Watts - 24V - UL Listed part number VN44RR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Q & A (0)
  • Photos

Victron Power Inverter - VN44RR

  • 1200 Watts
  • Pure Sine Wave
  • 24V
  • Victron
  • Inverter Only
  • Outlet
  • Kitchen Appliances
  • AGM/Gel/Lead Acid
  • Lithium
  • Marine
  • RV
  • Van

Running a TV, CPAP, or small appliance off a 24V battery gets unpredictable with cheap inverters. This unit delivers 1,000 watt pure sine power through a GFCI outlet, so connected gear runs cleanly without unexpected shutdowns.


Highlights

  • Stable Power for Sensitive Electronics: Pure sine wave output protects TVs, laptops, and CPAPs from noise issues.
  • Higher Output for Moderate Loads: 1,000 watt continuous power runs TVs, tools, and small appliances without overload.
  • Handles Startup Surges Without Shutdown: 2,200 watt peak power supports inrush from tools and motor-driven loads.
  • Optimized for 24V Battery Systems: 24V DC input supports efficient operation in higher-voltage battery setups.
  • Built-In GFCI Outlet Protection: 120V GFCI outlet adds integrated ground fault protection for connected devices.
  • Deep System Visibility and Control: VE.Direct port enables monitoring and configuration via USB or Bluetooth (sold separately).

Features to know about

Clean AC Power for Sensitive Electronics

Cheap inverters can cause buzzing, overheating, or unstable performance with electronics. This unit uses a full bridge and toroidal transformer design to deliver stable AC output for devices like laptops, TVs, and CPAP machines. It runs sensitive gear without the noise or erratic behavior common with lower-quality power.

Higher Output for Moderate Loads

Smaller inverters shut down when loads spike or multiple devices are running. With 1,000 watts continuous output and 2,200 watts peak power, this inverter handles moderate-demand use like small appliances, tools, and electronics. It supports higher startup loads without constant overload trips.

Optimized for 24V Battery Systems

Running higher loads on 12V systems can push wiring and current limits quickly. This unit is built for 24V DC input, operating within an 18.4V to 34V range for more efficient power delivery. It supports stable operation in 24V battery setups without excessive current draw.

Integrated GFCI Outlet Protection

Standard outlets do not provide ground fault protection in all setups. This unit includes a 120V GFCI outlet to monitor for ground faults and interrupt power when detected. It adds an extra layer of protection for connected devices during real-world use.

Real Monitoring and Configuration Access

When something shuts off, basic inverters leave you guessing. The VE.Direct communication port gives access to input and output voltage, load percentage, and alarm indications. With a VE.Direct to USB interface cable or Bluetooth Smart dongle (sold separately), you can adjust cut-off levels and operating behavior instead of troubleshooting blind.

Specs

Application:

  • 24V battery systems

Rated Power:

  • Continuous output power at 77ºF: 1,000 watts (1,200 volt-amps)
  • Peak power (starting/surge): 2,200 watts

Electrical:

  • DC input voltage: 24V
  • Input voltage range: 18.4V to 34V
  • AC output voltage: 120 VAC
  • Maximum efficiency: 91 percent

Connections:

  • Battery connection: screw terminals
  • AC connection: 120V GFCI

Environmental and Protection:

  • UL listing: UL 458
  • Operating temperature range: -40ºF to 149ºF
  • IP rating: IP21

Construction:

  • Material: steel chassis and plastic cover

Dimensions and Weight:

  • Dimensions: 4-5/8" tall x 9-1/8" wide x 12-7/8" deep
  • Weight: 16.3 lbs

Warranty:

  • 5-Year warranty


PIN242122510 Victron Energy Phoenix VE.Direct Inverter - NEMA GFCI - 24V - 1200 VA

Installation Details VN44RR Installation instructions



0
0

See what our Experts say about this Victron Power Inverter

  • Which Victron RV Inverters Allow Me To Run Air Conditioner Off Batteries For Awhile?
    Hey Chris! It really comes down to both inverter size and battery system. The smaller units like Victron 1,000w inverters # VN55ZR 12V and # VN44RR 24V aren’t going to handle an AC unit - they’re built for lighter loads. The Victron 2,400w Quattro II # VN42VR 12V and # VN58ZR 24V can get you closer, especially with a soft start installed on the AC. For short bursts - like cooling down during a stop - they can work in the right setup. Long term or all night would still be a little tricky...
    view full answer...
  • Which Victron Inverter Charger Is Best For Off-Grid Camper Van Build?
    Hey Sam! This is a perfect example of where simpler is often better, especially in a van build. If you’re running a 12V system, the Victron Phoenix 1,000w 12v inverter # VN55ZR is a great, straightforward option. If you’re going 24V for efficiency, then the # VN44RR 24V is the match. Both give you clean AC power without needing to tie into a full RV-style electrical system. You’d only step up to something like the 2,400w Victron Quattro II # VN42VR 12V or 2,400w # VN58ZR 24V if you want...
    view full answer...
  • Is It Better To Wire 12V RV Batteries In Series Or Parallel? Which Inverter Charger Is Compatible?
    Hey Jason, you can go either way - it just depends on your goals. Keeping them in 12V parallel works great with something like the Victron inverter charger # VN42VR or Inverter # VN55ZR and is the simplest route for basic power setups. Rewiring to 24V lets you use Victron inverter charger # VN58ZR or inverter # VN44RR, and gives you better efficiency and lower current, which helps with larger loads. You’re not losing or gaining power by switching to 24v - same batteries, just a more efficient...
    view full answer...
  • Do I Need Special Inverter For 5th Wheel RV That Is Wired For 50A? Want To Run Microwave On Battery
    Hey Melissa, great question - this is a really common point of confusion. You don’t need to match your RV’s full 50 amp capacity when choosing an inverter. Even though your RV is wired for 50A, an inverter only supplies power based on its wattage, not the full shore power rating. For typical off-grid use like outlets, TV, and a microwave, something like the 12V 2,400W inverter/charger # VN42VR or 24V version # VN58ZR is a great fit and gives you plenty of usable power. Smaller units...
    view full answer...
  • Camper Van Upgrading To 24V Battery Setup - What Is The Best Inverter To Use?
    Hey Tyler, if you’re already planning a 24V battery system, then the 24v 1,000w Victron Phoenix inverter # VN44RR is the right match. These are among the best quality inverters on the market, and this one comes protected with GFCI outlets and a peak wattage of 2,200w for startup surges. Compared to a 12V inverter like # VN55ZR, the 24V setup will: -Cut your current roughly in half (this is a good thing) -Reduce heat and voltage -Allow for smaller wiring You’re not gaining more total...
    view full answer...
  • Do I Need Stepdown Converter To Run 12V Lights In RV With 24V Battery Bank?
    Hey Mark, you’ll definitely want the step-down converter. Tapping a single battery in a 24V bank can cause imbalance and shorten battery life. The right way is to use a DC-to-DC converter like # VN32ZR, which safely steps 24V down to 12V for your lights and accessories. I have to do this same thing on electric golfcarts when I add 12v light kits to a 48v golfcart battery bank. If you’re running a 24V inverter like Victron 2,400w inverter charger # VN58ZR or 2,400w inverter # VN44RR, pairing...
    view full answer...
  • Does It Make A Difference When Choosing RV Inverter If My RV Is 12V Or 24V Battery Setup?
    Hey Alan! The short answer is yes - it matters a lot, because each inverter is built for a specific battery voltage. You can rewire your batteries to be in different voltage configurations. I saw you were looking at the Victron lineup, so here’s how those break down: - # VN55ZR > 12V systems - # VN44RR > 24V systems - # VN42VR > 12V Quattro II system - # VN58ZR > 24V Quattro II system Higher voltage systems like 24V or 48V tend to run more efficiently and with less strain on wiring, especially...
    view full answer...
  • Inverter For TV, Charge Laptop, Run Coffee Maker In 2022 Keystone Cougar RV With 2 Lithium Batteries
    Hey Derek, great question. For what you described, a 1,000 watt inverter like the Victron Phoenix # VN55ZR 12V or the 24V version # VN44RR is a really clean, simple solution. Both give you pure sine wave power for your electronics and small appliances, so your TV and laptops will run without any issues. Where it gets tricky is the coffee maker. Most of those pull close to 1,000–1,500 watts, so the # VN55ZR or # VN44RR can handle it since they have a 2,200w peak power rating - but you’ll...
    view full answer...
  • Is There A Way To Run 12V Lights And Loads From 24V Battery Bank In RV With Victron 24V Inverter?
    Hey Melissa, great question - this is the one thing you always have to plan for with 24V. Your RV’s lights, fans, and most accessories still run on 12V, so you’ll need a step-down converter like # VN32ZR. The setup looks like: 24V battery bank feeds into the Victron inverter # VN44RR which then converts DC to 120V AC for your outlets and appliances. 24V battery bank then feeds into the Victron stepdown reducer/converter # VN32ZR which brings it down to a manageable 12V for your lights,...
    view full answer...
  • Should I Run 2 24V In Parallel Or Series For 48V In Off-Grid Camper Van Build?
    Hey Kevin, this really comes down to how you want to wire those two batteries. With two 24V 200Ah batteries, you’ve got two solid options. If you wire them in parallel, you’ll stay at 24V but double your capacity to 400Ah, which pairs well with an inverter like # VN44RR. That setup is simpler and gives you more runtime at that voltage. If you wire them in series, you’ll have a 48V 200Ah system, which is what something like the # VN95VR is designed for. You’re not losing any total energy...
    view full answer...


Info for this part was:

Employee Steven C
Installed by:
Steven C
Employee Mary K
Edited by:
Mary K
Employee Alexander C
Updated by:
Alexander C
Employee Alex H
Written by:
Alex H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.