How to Determine Replacement Landing Gear for Keystone Fuzion

Updated 04/22/2020 | Published 04/21/2020

Question:

I have a 2012 Keystone Fuzion FZ310. My left landing gears are broken. Im going the replace the whole left side because its bent. Just need to know what landing gear will work. Thanks

asked by: Tim T

Expert Reply:

I can tell you exactly how to determine what replacement landing gear you need for your 2012 Keystone Fuzion FZ310, though we don't have any way of knowing what will work for any one specific trailer, which means you'll need to take some pretty simple measurements. Additionally, I recommend replacing the entire unit as opposed to just one side because this will ensure compatibility of all parts as well as weight capacities being equal.

To determine the correct replacement landing gear, you will need to measure the mounting brackets on your trailer from the underside of the top bracket to the top of the lower bracket as shown in the diagram, with 17-1/2" being the standard measurement. The amont of lift you need is also important, along with the capacity, although the landing gear we carry will all have plenty of capacity for your 2012 Keystone Fuzion FZ310.

If you get the measurement in the diagram I recommend the Stromberg Carlson Electric Landing Gear Set # LG-3.

This is a reliable landing gear set with a 6,500 lb capacity that will work great. I have added a link to a video review for you to check out as well.

expert reply by: Kyle S