Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hub-and-drum assembly fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (672 Customer Reviews)
This hub-and-drum assembly fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.The brake parts were all correct for my application and installation was straightforward with minimal tools needed. I did take the extra step of soldering the wire connections because that is the best way to do it IMO.
Stephen at etrailer was very helpful. He made sure I had all the right parts for my application. and they were on their way very quickly.
I will say that I tried to use my local dealer first because I like to support local businesses, but unfortunately, they were having trouble finding the right parts for my trailer. When we did find them, they were 50% more expensive for the exact same parts that etrailer supplied. I would also have had to drive 80 miles round trip to get them.
The reason for the 4-star rating is because of shipping/packing. The parts were heavy in large boxes with no packing material to hold them in place. Two of the hub sets were out of their boxes and there was a crushed grease cap. So, better packing to keep things in place in the boxes or use a smaller box would be nice.
I attached a few pics of before and after also tmy very worn hubs. You can see that eh armature is worn down to the studs and the magnets are starting to show the coils. It was time. Also a short video or timelapse that I titled, Trailer Brakes in 18 seconds
I was a bit intimidated by the thought of taking apart my hubs and had no idea where to start. But the etrailer live chat gave me a complete parts list based on my trailer GVWR, I watched a couple of videos on the website, and then spent about 1.5 hours on the job (honestly, at least 45 mins was me figuring out where I wanted to run the wire and strapping it in, then stopping to drink a beer and admire my work, with the actual hub work taking less than 20 mins apiece).
I was able to install the new whip, box, and run power to the hubs in about an hour afterwards. I then got in the truck, toggled to my trailer braking control, set my sensitivity, and went for a test drive. Works flawlessly!
Bought new Dexter brakes and drums to replace the original brakes on my 1995 Haulmark car trailer. The original drums and magnets were badly worn, and I wanted to replace them before going to the car cruise in Ocean City. I received an email from etrailer.com within hours of placing the order, stating that the order has shipped! The absolute best customer service I ever had. The parts arrived within days, and the packaging was superb. Thank you etrailer!
Paul K.
9/24/2018
The Dexter parts are working great so far! Although I only used the trailer twice for about 450 miles total. Ive always had good service from etrailer. Thank you for the follow up, I appreciate it.
I destroyed a hub/drum when i lost a bearing. I was able to clean up the spindle just enough for it to be salvageable and I put this new hub assembly on. So far, so good!
Hi Alex,
This is NOT my first order with you guys, there has been a few.
This order arrived on time, in perfect condition, and the replacement went FANTASTIC…….THANK YOU!!!
Every order with etrailer has been absolutely Perfect!
Keep up the Great work and customer service. E-trailer is Great!!!
Got this with a 10 inch trailer brake. Everything was as expected. I had to buy a couple nylock nuts from Menards. They are 7/16 by 40 pitch. Which is a fine thread.
Jonathan
8/23/2016
The brakes work great! Im really happy that I took the time to install them.
Customer service was extremely helpful! Order arrived earlier than expected. All the new parts fit exact. Bolted on and was done in 10 minutes! Have always been pleased with every purchase.
Easy installation, quality parts.
During shipment the box was busted open and one of the 4 hub/drums came out. So the box arrived taped up and 1 hub short to complete the job.
I called the contact number, great customer service. They are currently rushing me the missing hub. Thanks!
The brakes from etrailer were of excellent quality. They installed easily, and no adjustments were needed for the installation. After bleading the system, the brakes worked fine. I will definitely recommend etrailer to my friends and relatives needing trailer parts and accessories.
Customer service was excellent, fast shipping and perfect replacement parts.
Worked with Helen at etrailer to make sure the correct parts were ordered and supplied. Helen was a pleasure to work with and the hubs and bearings fit perfectly. A year later everything is still working great.
Thank you Helen and etrailer.
Installed perfectly and performed as expected.
This was a switch out to a new trailer without brakes to adding Hubs & Drums with brakes. Everything worked out as planned and it was a quick change out.
Thanks for your help etrailer
Peter
7/4/2023
Everything is still working as planned. The change out for the installation of trailer brakes is as planned. I specified these parts for the brakes but also so I could add a hand brake lever when the trailer is parked. I didnt want the possibility of it rolling. Additionally, this allowed me to drill a hole through the hand brake lever to lock it against theft. The entire parts and planning worked.
Parts r good quality fit good would order from trailer again
Who doesn’t love a 20 minute hub change with bearings and grease?? I sure do and replaced all my hub bearing assemblies with these. It took about an hour and I was back on the road. I drove our TT about 150 miles over the weekend and it did great! Thanks to the staff at ETrailer for going above and beyond with the sale as well!
Reassembly of parts went perfectly, I made the right choice with etrailer !!
installed brakes on my 97 Rogue boat trailer. E-Trailer had everything I needed for the job. Trailer already had the 4-hole mounting plate for the backing plate. It was all bolt on, brakes work great. I have bought quite a few items from them over the past few years, including an axle assy with brakes for another boat trailer, 2 brake controllers and also a trailer hitch for our older Lexus suv. I am very satisfied with there service and quality of there merchandise.
We have been going camping out West snd Southwest for five years now. Pulling 2003 Jayco 12 Sd popup behind 2006 Chevrolet Express 2500. A lot of mountains. Big Mountains. I noticed that the hydraulic brakes on the camper didn't work properly. I have tried to adjust them multiple times but it didn't help. I decided to replace them with electric brakes . It looked like etrailer had exactly what I needed. I ordered the electric brakes assembly first and then hub and drum assembly. Had to take some measures for the brake plate mounting and also get part numbers of the old bearings in the hub. All parts arrived two days after order was placed. Amazing. All the parts were there. . I am not the greatest mechanic but I was able to install them fairly quickly. Installation videos on etrailer website and YouTube were very helpful. We just went on our first camping trip this year. Only two hours drive. It seems that everything works fine I can feel that new brakes actually work. Thanks to Nicole at etrailer for helping me with this order.
Everything worked out well and are good replacements for existing drums. My only issue was the nuts and washers were too large for my spindle. Luckily my existing nut and washer were in good condition and could be reused.
The Dexter brakes and hubs are great - a bit pricey but far and above the no-name brands. There was one problem with the order (well 2 actually), they only shipped one brake in the package so there go my plans for installing the new hubs and brakes this weekend. This was an order for left-and-right brakes and two hubs. Mistakes happen so I'm not real upset about it. I'll update this review when I see how customer service handles this.
The second problem is the packaging. Nothing was damaged, which surprises me, but the two Drums and one brake were in their own boxes inside a bigger (huge) box with no peanuts or anything to keep them from flopping around. I lifted the box up on end so I could pick it up to carry it back to my work shed. When I did, it almost rolled out of my hands because the contents shifted so violently. When I got back there and opened the big box, the three smaller boxes were piled atop each other at one end.
FORTUNATLEY, they made it through the carrier's system, of which I am very familiar since I worked there for years. I was shocked they did. Better care when packing into larger boxes would go a long way.
Five stars for the products. Three (average) for the care in shipping the order.
I purchased a used cargo trailer. We used it in October to go to Colorado on a hunt. We had a horrible time with the brakes failing. I tore it down this Spring and found there were no brakes on the front axle. I started checking around locally and could not find the parts I needed. I found etrailer online and took a chance and ordered(something Idon’t do shop online)the parts I was sure I needed. The parts arrived Tuesday and I installed them today. Everything was just as advertised and the fit was exact. Now I just need to get two new tires and wheels and the trailer will be ready for our trip to Colorado this year. Thanks E-Trailer.
John
Really detailed helpful videos made installation a snap. I put brakes on a trailer that didn’t have them.
A word of caution. Unlike the brake kit, the drum kit only does one wheel. So if you order a brake kit and a drum kit you don’t have enough to do two wheels.
As always, great doing business with E trailer. Great products
Great Price on a new brake drum for my Casita. Included everything - bearings, seals, dust cap, retainer, axle nut and lug nuts. Did not include the washer, but that's no big deal (I have a few extra!). Arrived much faster than expected, too. Got my Casita back on the road after a bearing failure that scored the inside of the hub. Great price and good service from etrailer! I must also mention that etrailer has so much good INFORMATION and tutorials as well. There might be other online sites that have it for a penny cheaper, but they don't have the information you need to get the job done right. Thanks again etrailer!
Melissa provided excellent service and follow-up on delivery
Got it on today. No problems
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
11/11/2023
I am sorry that the hubs arrived in this condition. Let me get you over to our customer service department for them to see what we can do for you.