Can Timbren Axle-Less Suspension System Work With Off-Road Tires?
Published 11/17/2017
Products Featured in This Question
Question:
I would like to know which brake assembly works with 84546UC3-EZ Hub/Drum Assembly Which castor/wheel assembly works with the Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2 Lift - 2,000 lbs
asked by: James S
Helpful Expert Reply:
There is a 2,000 lb capacity Timbren Axle-Less Suspension with 4" Drop Spindle # ASR2KHDS09, though not a 1,200 lb one. I am not certain what you are referring to in terms of "strong enough" but it will work with 3,500 lb rated hub and drum assemblies # 84546UC3-EZ as well as 3,500 lb brakes. If you were referring to your trailer being strong enough, if you do not have a crossmember above where you want to install the Timbren one will need to be added, or you can reinforce your trailer's frame by adding standard, 2-inch-square steel tubing using the built-in square holes on the pair of units.
The system was designed to be used with off-road tires; I've added a link to a video review of this system for you to take a look at.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Drop - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Availability Of Replacement Brake Adjusters
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Q&A: How to Find Replacement Hub for Mobile Home Axle
- Q&A: How to Determine Between 5 on 4-1/2 and 5 on 5 Bolt Patterns for Hub Covers
- Article: Determining Trailer Tongue Weight
- Article: Stability Control for Heavy Duty Vehicles
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Improving the Ride Quality on a Triple Axle Trailer
- Q&A: How to Install the Timbren Silent Ride Suspension
- Q&A: Bearings and Races for 7,000 Pound Trailer Axle
- Q&A: What Measurements are Needed to Find the Correct Dexter E-Z Flex Equalizers for a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Where to Position the Trailer Axle?
James
11/17/2017
I would like to know which brake assembly works with 84546UC3-EZ Hub/Drum Assembly Which castor/wheel assembly works with the Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2 Lift - 2,000 lbs