bing tracking image
  1. Accessories and Parts
  2. etrailer
  3. Trailer Brakes
  4. Electric Drum Brakes
  5. Brake Shoes
  6. LH
  7. RH
Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs

Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs

Item # AKBRKR-S-10
Retail:$43.02
Our Price: $40.00
You Save: 7%
Accessories and Parts
Shipping Weight: 4 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Replace the brake shoes and lining on your 10" diameter x 2-1/4" thick manual-adjust, electric trailer brake assembly. Fits brakes designed for 3,500-lb axles. Includes hold-down clips. 1-800-940-8924 to order etrailer accessories and parts part number AKBRKR-S-10 or order online at etrailer.com. Free expert support on all etrailer products. Great prices and Fastest Shipping for Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (72)
  • Q & A (0)
  • Photos

etrailer Accessories and Parts - AKBRKR-S-10

  • Trailer Brakes
  • Electric Drum Brakes
  • Brake Shoes
  • etrailer
  • LH
  • RH
  • 3500 lbs
  • 10 Inch

Replace the brake shoes and lining on your 10" diameter x 2-1/4" thick manual-adjust, electric trailer brake assembly. Fits brakes designed for 3,500-lb axles. Includes hold-down clips.


Features:

  • Replaces the shoes and lining on (1) 10" diameter x 2-1/4" thick manual-adjust, electric trailer brake assembly
    • Compatible with brake assemblies from most manufacturers, including AxleTek, Dexter, Lippert (LCI), IAC, and AL-KO
  • Automotive-grade friction material is molded to brake shoes
    • Pads are fully bonded - not riveted - to shoes for long life and more braking torque
    • Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding
  • Includes:
    • 2 Brake shoes with lining
    • 2 Hold-down springs
    • 2 Hold-down pins
  • SAE-N certified


Automotive-Grade Friction Material

Each shoe is lined with automotive-grade friction material for improved stopping performance and longevity. The friction material is fully bonded onto the surface of the brake shoe. This lining is custom-molded for a perfect fit. The edges are tapered to ensure long-lasting performance. This taper, along with the circular grinding that the lining undergoes, helps to prevent cracking and crumbling. This durability helps to prevent mechanical lockup, which can occur when brake shoes are excessively worn or broken.


The friction material is also SAE-N certified, which means that it is an environmentally safe product that complies with California and Washington regulations regarding the composition of brake pads. As a result, this material not only provides high-performance braking that can endure the test of time, but it is also environmentally friendly and safe for use throughout the United States and Canada.



15-821 AxleTek Replacement Electric Brake Shoe and Lining Kit for Manual Adjusting 10" Brake Assembly - 3.5K lbs





Customer Satisfaction Score:


Customer Reviews

Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs - AKBRKR-S-10

Average Customer Rating:  4.6 out of 5 stars   (72 Customer Reviews)

Replace the brake shoes and lining on your 10" diameter x 2-1/4" thick manual-adjust, electric trailer brake assembly. Fits brakes designed for 3,500-lb axles. Includes hold-down clips.

by:

It’s really too early to give a full objective review of the brake shoes, but the product looks good and mostly met the requirements for a replacement part. Their was a small detail with the top spring ,in that the holes in the shoes were too small to accommodate a complete fit. I had to grind down the end of the spring to make it work. Time will tell on how the shoes wear and for how long.

Etrailer Expert

Katrina B.

8/12/2022

I have consulted with our installers and they have confirmed that there is a specific way that these shoes are supposed to be installed. In order for the springs to fit properly, you will need to the springs before adjusting the brake shoes to the hubs. What we do suggest is to replace that spring you have grinded with part # AKBRKR-SP in order to prevent any defects in the braking assembly.

Paul

7/23/2023

No complaints or mishaps after a year since installation. The new brake components are fulfilling their purposeful function so far. I would however in retrospect, replace the entire brake assembly instead of individually like I did. This would alleviate problems of installation when mixing part components.



by:

Replaced some crusty old cracked lining. I had the old style manual adjustment 3500# Dexters. They fit. They worked. Lost a star, since there wasn't much pad material.



by:

etrailer had the parts in stock that I needed at a reasonable price. The parts (brakes and bearing seals) have been in service on an light duty equipment trailer for about a year now which I use weekly for 8 months a year. Has been good so far.



by:

Great information on your website to help with determining the right part for your trailer. The parts shipped quickly and had them installed on my trailer in no time. The parts are an exact match for my 2017 Grand Design trailer. They work perfectly and I will be using etrailer when I need to replace or upgrade my brakes in the future.



by:

The help over the phone was great. Unfortunately the incorrect part was sent for one of the inner bearings.

Etrailer Expert

Jenny N.

5/6/2023

Oh no! Customer Service will be in touch. We will get the correct one sent out.



by:

Items were direct replacement for repair of brake assemblies.



by:

Products are what your order, plain and simple. Caller operators are very helpful.



by:

Excellent customer service while ordering followed by prompt delivery of and excellent product (brake shoes for my trailer.) I'm extremely pleased with the entire process.



by:

We were told by an etrailer representative that these would fit my camper and they didn’t. Then when I went to return I have to pay shipping and I was charged by etrailer double what it would have cost me to ship them back myself.

Etrailer Expert

Jenny N.

9/21/2022

I am happy to have the order reviewed for you. Customer service will be in touch.



by:

Very helpful with product selection and fast delivery.



by:

The etrailer team helped me identify the correct brake shoes for my old trailer over the phone, when I had no part number or manufacturer to give them as a reference. Two days later I had the parts and the shoes were a perfect match and the job was finished in 30 minutes.

Great job Donna and George!

Dave H.

10/8/2019

Works great!



by:

a year later review… about 25,000 miles on the trailer and I use near maximal trailer brake (just under where it will lock up the wheels) all the time. Though most driving is interstate much is going down mountains and I do not have exhaust brakes, so I probably am abusive to these.
I took one drum off a few months ago and everything looked fine and there was not much wear that I could tell. No complaints.



by:

Great replacement, old ones were cracked. These are on a 99 trailer, haven't pulled it since replacing, so hope I got the adjustment correct as these are not self adjusting. Great company

Roger

6/4/2021

Worked great and were easy to install.



by:

Best price, fast shipping.



by:

Good fit, hope they last, thanks for speedy delivery.



by:

1st, the website makes it super easy to find the correct brake shoes for my race car trailer, 2nd, my order was filled super fast and shipped, I received my parts in 5 days from the day I placed my order, and I live 6 states away from where my parts were shipped from. 3rd, brake shoes are exactly as advertised and are good quality, and fit perfect on my trailer, 4th, shipping was free.



by:

Just received today. I have already installed and tested them on my 16' tandem axle utility trailer with Dexter 3500# axles. They fit perfectly. I used all my existing hardware as it was still in good shape. I hope they last as long as the OEM shoes. My local part store did not have these in stock. They could have gotten them in the next day, but were $30 more than etrailer.com! Fast shipping. I got them less than 48 hours after ordering. The online video was helpful to know which shoe went to the front and which to the back. Thanks etrailer!



by:

They have work great



by:

I appreciate you keeping me informed as always. I am 85 yrs old so it will take me awhile to get these installed. One wheel brake per day. They should last me until i'm 95, then I won't to much care.. The linings look professionally installed on the shoes. If you need some spare shoes, let me know.



by:

The product arrived on time and in perfect condition. The brake shoes were an identical match to my original shoes and installation was completed without any issues. I appreciated that etrailer notified me when my order had been received and again when it had shipped, along with tracking information.



by:

Customer service is knowledgeable, they helped me find the brake shoes for my trailer.



by:

Needed trailer brake parts and etrailer had the best description of the products and prices. I like the fact that the parts are very well explained with dimensions so that you can order the proper part the first order.

Good shipping, hassle free transaction.



by:

The brake shoes fit perfectly and the price was reasonable.



by:

Received parts today. All were correct as ordered. Look forward to easy installation



by:

As described. The retainer springs were a little longer than the original ones.


25
72
Show More Reviews

See what our Experts say about this etrailer Accessories and Parts

  • 2019 12 Belmont Dump Trailer Brake Shoe Replacement
    If you can get me the axle capacity of your trailer and the brand of the assemblies I can see if we have replacement shoes.
    view full answer...
  • Will Replacement Brake Shoes For 10" Manual Adjust Electric Brakes Work With 3,500 lb Rockwell Axle
    Yes, your Rockwell American 3,500 lb axle is just a standard axle, and since you mentioned having manual adjust 10 inch electric brakes, you can use the replacement shoes you asked about, which are the following part number: - Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs # AKBRKR-S-10
    view full answer...
  • Replacement Brake Shoes for TruRyde 3,500 lb Axle Brakes
    Yes the brake shoes part # AKBRKR-S-10 will work as replacements for Truryde 10 inch brake assemblies for a 3,500 lb axle.
    view full answer...
  • Replacement Electric Brake Shoes for 2006 T@B Camper Trailer
    We do have some replacement brake shoes compatible with AL-KO brake assemblies. These are for the manually-adjusted brakes though so you'll want to keep that in mind: - 7" Electric Brake Assemblies # AKBRKR-S-7 - 10" Electric Brake Assemblies # AKBRKR-S-10 - 12" Electric Brake Assemblies # AKBRKR-S-12
    view full answer...
  • Replacement Brake Shoes and Complete Brake Assemblies for Axle Tek 12 x 2-Inch Trailer Brakes
    If you had an accidental grease leak within your trailer's hub/drums and the shoes were exposed to grease you will want to replace them. The brake shoe material has porosity that will let some of that wheel bearing grease work into the surface. It is not possible to completely clean this grease off. You can clean the drums but either the brake shoes or the entire brake assemblies should be replaced. I checked your ordering history and found that you have 12 x 2-inch Axle Tek brakes rated...
    view full answer...
  • What are the Replacement Brake Shoe for the Etrailer 10 Inch Brake Assemblies
    For the Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs, # AKEBRK-35, the replacement shoes will be the Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs, # AKBRKR-S-10. The replacement shoe kit will replace one brake assembly. Two kits will replace on axle.
    view full answer...
  • Replacement Hydraulic Braking Assemblies for Master Tow Dolly with 3,500 Lb Axle
    If you're just looking for the braking assemblies then the correct kit would be the Hydraulic Trailer Brake Kit part # AKFBBRK-35 since you have a 3,500 lb axle. These assemblies are free backing so you can reverse the dolly without locking up the brakes. Please note, we don't offer universal shoes(pads) for all assemblies which is why you will need to replace the entire unit unless you can identity the exact make and model of assembly you have now. If you need anything else for your...
    view full answer...
  • Replacement Electric 10" Brake Shoes For a 2000 Scamp 19' Everlands
    I reached out to Scamp for help to find your exact brakes, unfortunately due to the age of your 2000 Scamp 19 Everglades they did not have the exact information or parts available and the only thing that they could tell me is your trailer uses 10" brakes. I recommend pulling apart one of your hubs first to check that the Replacement Shoe and Lining Kit # AKBRKR-S-10 and Magnet Kit # AKBRKR-M10 are the correct. This will also be a good time to also inspect your bearings, drums, grease...
    view full answer...
  • Replacement Electric Brake Shoes for 4,400 lb Axletek Drum Hubs
    The 10" x 2-1/4" Electric Brake Shoe/Lining (One Wheel) # BP04-095 are the brake shoes for the Dexter electric brakes and they will fit the Axletek brand just fine. The # AKBRKR-S-10 are also a fit for your 4,400 lb axles.
    view full answer...
    Image 1 for
  • Recommended Brake Assemblies for Second Axle of 2006 Forest River 7,000 lb Utility Trailer
    For your 10 inch by 2-1/2 inch hubs, the brake assemblies I recommend are the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These brake assemblies are great for your axle and I recommend changing out the assemblies on your other axle to match because of the price point of getting all new parts versus just brake shoes and probably magnets. These assemblies are recommended to be initially adjusted and then will self-adjust...
    view full answer...
  • Replacement Brake Shoes for Electric Brakes
    The brake shoes you need are going to depend on the diameter of your current assemblies and the weight capacity of your axle. The # AKBRKR-S-10 are replacement brake shoes for 10" diameter x 2-1/4" thick manual-adjust, electric trailer brake assemblies on a 3,500 lb axle. I took a look at the previous assemblies you purchased, and they were 7" assemblies for 2,000 lb axles. Since yours are automatic adjusting, the correct brake shoes would be # AKBRKR-S-7 which are for 7" diameter x 1-1/4"...
    view full answer...
  • Replacement Brake Shoes for Axle Tek 10 Inch x 2.25 Inch Manually Adjusted Brakes
    We don't have a way of knowing for sure the exact brakes that are on your coach, but the Axle Tek drums lead me to believe that the brakes are likely the same. For that reason you could use the Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs # AKBRKR-S-10, which are compatible with brake assemblies from most manufacturers, including AxleTek, Dexter, Lippert (LCI), IAC, and AL-KO. These are 10" x 2.25" shoes, so they'll be the correct size. If...
    view full answer...
  • How to Determine if You Have Manual or Self-Adjusting Brakes
    Really the only way to tell if you have manual or self-adjusting brakes is to remove the hub and take a look inside. If you can see a cable running at an angle (see included photo), then you have self adjusting brakes like the Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-35-SA. If you do not have that cable, then you have manual adjusting brakes like the Electric Trailer Brake Kit # AKEBRK-35
    view full answer...
    Image 1 for Image 2 for
  • Why do Brake Pads on 3,500 lb Brakes Crack and Should They be Replaced
    Brake shoes and linings (the brake pads) will crack for a number of reasons, mostly due to wear, but also dependant on the quality of the material. For example, some brake pads, such as those on the Electric Trailer Brake Kit # AKEBRK-35 are cut to length, while others are simply snapped off at intervals. Pads which are cut to length are going to see less cracking and outright wear in the material. If you do see cracking, you definitely want to replace the shoe and lining, or replace...
    view full answer...
  • Replacement Drum Shoes or Complete Brake Assemblies for 2016 Jayco SLX 264BHW
    Replacement drum shoes are determined by the hub size. Based on the GVWR of your 2016 Jayco slx 264bhw with dual axles and the 15 inch factory wheel size, you will definitely have 10 inch hubs. I recommend replacing your shoes with the Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs # AKBRKR-S-10. Since often when shoes need replaced the springs, and magnet also need replaced I recommend replacing your entire brake assemblies with the Electric...
    view full answer...
  • Replacement Brake Shoes for 10 x 2-1/4" AxleTek Brakes
    The 10" x 2-1/4" Electric Brake Shoe/Lining # BP04-095 could possibly work, but I recommend going with the Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly # AKBRKR-S-10 instead because it is designed specifically for the AxleTek brake shoes. Usually we recommend replacing your whole brake kit instead of just the brake shoes because some of the other internal components would need to be replaced soon too. If you want to go this route then the kit you need...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Parts Available for etrailer 3,500 lb Trailer Axle
    For the etrailer axle part # e95SR we do have replacement hub/drums with part # AKHD-545-35-EZ-K, and for brake assembly set # AKEBRK-35, for brake shoes # AKBRKR-S-10, and magnet # AKBRKR-M10.
    view full answer...
  • Determining Which Brake Assemblies Fit 3000lb Dexter Axle With 8-247 Hub and Drum Assembly
    The Dexter Hub and Drum assembly 8-247 you have on your Dexter P-11 3000lb axle use 10" x 2-1/4" brake assemblies. The correct replacement assemblies for your hubs is the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,000 lbs # K23-472-473-00. If your mounting hardware is still in good shape you can reuse it, or it can be replaced using # BRKH10B. For replacement shoes you can use # AKBRKR-S-10. I included a few videos of the products mentioned for you to...
    view full answer...
  • Replacement Bearings, Grease Seals & Brake Shoes For Timbren Axle-Less Trailer Suspension 2000LB HD
    For your Timbren Axle-Less Trailer Suspension # ASR2KHDS04 with the Timbren electric brakes and hubs you will need the Bearing Kit # BK2-100 for each hub. The bearing kit includes both bearings, races, a grease seal, cotter pin and tang washer. For your brakes shoes you will need the Replacement Shoe and Lining Kit # AKBRKR-S-10 since you mentioned they need replaced. If you ordered brakes and hubs separately from the Timbren, I would need to know the manufacturer and item numbers on...
    view full answer...
  • Replacement Electric Brakes for a 2008 Fleetwood/Coleman Sequoia Tent Trailer
    I would be happy to help you find some brake shoes for your 2008 Fleetwood/Coleman Sequoia Tent Trailer. The Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs item # AKBRKR-S-10 will work with your drum and on both sides of your trailer. This are sold individually. For just a little bit more money I recommend replacing your brake assemblies entirely. The etrailer Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs item...
    view full answer...
  • Replacement Brake Shoes for 10x2-1/4 Inch Hydraulic Brakes
    If you have hydraulic brake assemblies that are not free-backing hydraulic trailer brakes, then the 10" X 2-1/4" Hydraulic Brake Shoe/Lining (One Wheel), # BP04-120, are the shoes that you will need. One set of shoes will replace one brake assembly. If you have free-backing hydraulic brakes then use one of the following per wheel: Replacement Brake Shoes for Titan 10" Free-Backing Hydraulic Trailer Brakes, # T4744800. Replacement Brake Shoe Lining for Demco/Dico 10" Free-Backing Hydraulic...
    view full answer...
  • Replacement Brake Shoes For a 2018 KZ Sportsmen Classic 181BH Travel Trailer
    Based on the information I could find for your 2018 K-Z Sportsmen Classic 181BH travel trailer I see it is a 3,500LB axle and uses self-adjusting brakes. If you have the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 you will need the Left # K71-681 and Right # K71-682 Brakes Shoes for your axle. The Replacement Shoe and Lining Kit # AKBRKR-S-10 you found is for the Electric Trailer Brake Kit # AKEBRK-35-SA. If you cannot identify the brake kit you have then you will want...
    view full answer...
  • Availability Of Replacement Brake Shoes For 3,500lb Dexter Brake Assemblies
    We do have brake shoes for a 3,500lb Dexter brake assembly, but the 12" x 2" is not going to work as you have 10" brakes. Instead you'll need the Dexter # K71-681 for the left side and # K71-682 for the right side if you have the self adjusting brakes, or # AKBRKR-S-10 if you have standard manual adjust brakes. However it isn't much more to just replace the entire assembly with the self adjusting kits # AKEBRK-35-SA, which tends to be a better idea because chances are if the shoes on...
    view full answer...
  • Replacement Parts for 1970s Camper Frame with Dayton Fayette Axles
    The Lippert Components Heavy-Duty Replacement Shock - Yellow # LC283280 is 8.625 inches compressed and 13.5 inches fully extended. Your current suspension may extend and retract slightly further but the shocks will be a good replacement based on the actual shock absorbing as long as they will fit your brackets. Unfortunately we don't have any info on your axle or hubs, so to help, I will need to get the bearing numbers printed on the face of your inner and outer bearing of one hub. If...
    view full answer...
    Image 1 for

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.