Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control the level of grease in your axle hub.
Features:
Specs:
Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub. To adjust the amount of grease in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8".
The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel and diluting the grease.
An automatic pressure-relief feature is built into the Bearing Buddy. When the device is full, grease will seep around the edges of the piston and into the barrel. This prevents overfilling that can damage the inner seal.
You can manually check the grease level in your Bearing Buddy by pressing on the edge of the piston. If you can rock or move the piston, the hub is properly filled.
Average Customer Rating: 4.8 out of 5 stars (37 Customer Reviews)
Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control the level of grease in your axle hub.Fast shipping as always with etrailer. Measured inside diameter of hub with calibers and etrailer was the only one with that size. Fit perfect and easy install with a block of wood and hammer.
Great people to deal with.
Fits as they should. Easy to install. I have them on 4 trailers. Would not use anything else.
Anyone with any trailer experience has already heard of "bearing buddy" and if it wasn't a great product there wouldn't be so many copy cats. What impressed me the most was the fact they had them in the 2.3" size, and even more impressive is etrailer was the only place I could find them. To top it all off, I needed them in a hurry and etrailer got them here on time. They are great to use on any trailer, but I would never have a boat trailer without them, EVER.
Great product. Great distributor. Thanks etrailer!
I was looking for a difficult core size, (2 & 5/16"), and "thanks etrailer" for helping me after I first ordered the wrong size. I got my correct Bearing Buddy set for my older boat trailer. I am excited to put them into action.
The BB2328 is the exact size. It was difficult to get them started, as the alignment required exactness, but I managed and I will not worry about them to fall out or easily be stolen. These BBs are a seamless fit. Thanks again etrailer...
The Buddy Bearing ordered fit great based on the information received from etrailer advisor. They were very helpful based upon measurements supplied to them. The Buddy Bearing has performed excellent.
My buddies fit a little loose. I used a little lock-tight and some tension pins to keep them in place.
The Bearing Buddys were exactly as described and shipping was fast.
If you are buying Bearing Buddy’s measure VERY carefully. I bought model2240 based on my measurement and they were too small by .08 inch. I then ordered the 2328 which were a perfect fit.
We upgraded our bass trailer with this Titan swing away. It works really well. Major improvement!
Contacted etrailer.com by phone and spoke to John H. Extremely helpful and was able to steer me to the right size of bearing protectors that I needed. Will be shopping here again.
Bearing Buddies are excellent for boat trailers. etrailer.com provides prompt delivery of what I need
I received the wrong size buddy bearings. Asked for return info but never received.
Fast shipping!!!
I will not be using this for 3-4 weeks because the trailer is at a different location....However the initial sale and shipment have been serviced with excellent speed and communication
Thank you very much
I looked long and hard for these specific bearing buddies, great service!
etrailer was able to get me this part faster than my other vendors. Happy customer and will definitely use again.
They have been so great about returns and getting my order to me. I have mAde some errors and they did not make me feel like it was a big deal. They were also quick to fix any mistake. Awesome company to work with. Adam is one of the best!
Going on one year and the things are working great. Worth the investment.
So far these have held up great. I have had zero issues with them.
Great product, great place to deal with.
Bearing perform just fine
Fast service. Excellent package tracking site.
Work great so far. Fast shipping and great customer support.
Awesome product, very reasonable price and customer service that's second to none:)
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.