Availability of Grease Cap for 2.3125 Inch Hub Bore Diameter
Updated 06/22/2018 | Published 06/20/2018
Question:
I measured my hubs with a caliper and they are 2 5/16 ID smooth. Do you stock Bearing Buddies or hub caps? Thanks
asked by: David H
Helpful Expert Reply:
The closest grease cap we have available to the 2-5/16 (2.3125) inch measurement you took on your hub bore is the Bearing Buddy Bearing Protectors # BB2328. These are designed to fit hub bores that have an inner diameter of 2.328 inches. This is awfully close to your measurement, but they still might be a bit too large to fit your hubs if your measurement is correct. I just recommend verifying your measurement one more time to make sure you are getting an accurate reading.
I have attached a short video demonstration on this product that you can also check out.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2328 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.33 Inch
- 4400 lbs Axle
- 5200 lbs Axle
- 6000 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: hub dust cover
- Search Results: bearing buddy
- Q&A: What Bearing Kit and Idler Hub Fit a 2005 EZ Loader Boat Trailer With UFP H-1377 Idler Hubs?
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Bearing Buddy Bearing Protectors - Model 2328 - Chrome Plated (Pair)
- Q&A: Grease Cap Recommendation for Hub Bore of 2.3125
- Shop: Fulton Grease Cap - 2.333" Outer Diameter - 1.281" Tall - Drive In
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Video: In-Depth Review of the etrailer Bearing Protectors w/ Covers for 1.78" Hub Bore
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Video: Hands-On with the Fulton Grease Cap
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Grease Cap, 2.44" OD Drive In with Plug - Qty 2
- Shop: Fulton Grease Cap - 1.943" Outer Diameter - 1-3/8" Tall - Drive In
- Q&A: What Bearing Buddy Is Closest to Correct Size for Hub Bore Diameter of 2.3125 inches
- Q&A: Does Dexter Vault System Work the Same As Bearing Buddy
- Q&A: Replacement Grease Seal Recommendation for 32372 with OD 2.325 and ID of 1.680
- Q&A: Comparing The AL84JQ And AL24JQ For A 2024 Toyota Tundra
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups