How To Find the Correct Replacement Idler Hub That Uses Bearing Buddy For 2.328 Inch Bore
Updated 07/01/2019 | Published 06/28/2019 >
Question:
The only identifying number I have are on my bearing buddys. They are 2328SS Can you tell me what the hub would be? I THINK it may be a 2.328 inch bore but not sure. It is a 5 bolt thanks
asked by: Don L
Expert Reply:
I do have options for you but I cannot confirm fit of a replacement idler hub based solely on the Bearing Buddy Bearing Protectors part # BB2328SS. These Bearing Buddy Bearing Protectors which have a 2.328" hub bore are common for 4,400 lb, 5,200 lb and 6,000 lb axles but the 5 bolt pattern you said you had is not common for these axle capacities.
Therefore, the only option I have for you to confirm the correct replacement idler hub is to pull the hubs and measure the spindle using the photo below
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2328SS - Stainless Steel - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.33 Inch
- 4400 lbs Axle
- 5200 lbs Axle
- 6000 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Q&A: Surge Drum Brake Actuator Recommendation that Has Electric Reverse Lock Out
- Q&A: Dust Cap Recommendation for Ranger Trail Boat Trailer with Hub Bore of 2.326 inch Hub
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: Bearing Buddy Recommendation for Hub Bore of 2.32 inches
- Q&A: Replacement Hub Needed for Older Trailer Axle with M12649 and LM48548 Bearings
- Q&A: How to Find Correct Replacement Braking Assemblies for a 1989 EZ Loader Trailer
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: 7 Facts About RV Antifreeze Every RVer Should Know


