Replacement Dust Cap/Grease Cap For Older Boat Trailer With Cap Measuring 2.312 Inches
Updated 06/09/2017 | Published 06/08/2017
Products Featured in This Question
Question:
I need a dust cap for a older boat trailer. The cap I have measures 2.312 Any help would be appreciated
asked by: Jim Z
0
Expert Reply:
For your boat trailer I recommend the Bearing Buddy Bearing Protectors - Model 2328 - Chrome Plated (Pair) # BB2328. These are designed to have extra grease and keep water out of your hubs so they can be completely submerged. If you are looking for a standard grease cap, the closest we have to your 2.312 measurement is the Fulton Grease Cap - 2.333" Outer Diameter - Drive In # F001601 which should work.
expert reply by:
Jason S
0
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2328 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.33 Inch
- 4400 lbs Axle
- 5200 lbs Axle
- 6000 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Bearing Buddy Bearing Protectors - Model 2328 - Chrome Plated (Pair)
- Shop: BOLT brand vehicle and hitch locks
- Shop: Fulton Grease Cap - 2.333" Outer Diameter - Drive In
- Video: BOLT Coiled Cable Lock Spec Review
- Video: Feature Breakdown: BOLT Coiled Cable Lock
- Q&A: How to Measure a Trailer Hub for the Correct Size Grease Cap
- Q&A: Bearing Buddy Recommendation with Outer Diameter of 2-3/8 inch
- Shop: BOLT Coiled Cable Lock - 6' Long - Codes to GM Center Cut Key
- Shop: Bearing Buddy Bearing Protectors - Model 2441T-SS - Threaded - Stainless Steel (Pair)
- Video: A Closer Look at the Fulton Grease Cap
- Shop: Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers - Keyed Alike
- Shop: Zinc Plated Grease Cap - 2.333" Outer Diameter - 1.00" Tall - Drive In
- Shop: BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Codes to Early Model GM Key
- Search Results: ez lube plug
- Search Results: 233 inch od trailer bearings races seals caps
- Search Results: 473317
- Search Results: trailer bearings races seals caps
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Search Results: ad2527e grease seal
- Q&A: What Bearing Buddy Is Closest to Correct Size for Hub Bore Diameter of 2.3125 inches
- Q&A: Does Dexter Vault System Work the Same As Bearing Buddy
- Q&A: Replacement Grease Seal Recommendation for 32372 with OD 2.325 and ID of 1.680
- Q&A: Comparing The AL84JQ And AL24JQ For A 2024 Toyota Tundra
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer