Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keeping bearings greased doesn’t have to be messy or time-consuming. This Redline hub uses an E-Z Lube-compatible grease cap that lets you add grease right through the zerk fitting on your spindle. Just remove the rubber plug, attach a grease gun, and push in the LMX Red Grease—no disassembly needed. It keeps both the L68149 inner and L44649 outer bearings properly lubricated and helps prevent corrosion inside the hub.
This hub comes pre-packed with LMX Red Grease and includes all the essentials—bearings, races, grease seal, cap, wheel bolts, and lug nuts. You can install it right away without having to pack bearings by hand. Add a little grease to your spindle and you’re good to go. The hub is built for 3,500-lb E-Z Lube axles with #84 spindles and carries a 1,750-lb weight capacity per hub.
Getting your wheels mounted is simple thanks to the 5 on 5" bolt pattern and 1/2" diameter wheel studs that measure 1-5/16" long. The hub fits wheel sizes from 13" up to 15" and has a pilot diameter of 2.58". It’s a solid match for standard setups where you want dependable fit without trial and error.
The sturdy iron build of this idler hub handles steady towing without flex or wobble. It’s designed to stay tight under load and keep your wheel rotation smooth mile after mile. With both L68111 and L44610 races already pressed in at the factory, there’s no hammering or setup guesswork—just mount it and tow with confidence.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Exact fit. Easy to install.
The service was great ordering was easy and very prompt service. The axle is great
Good service, arrived quick and measuring instructions were perfect to get the right size hub
Little different retaining ring than what I am used too but it works!
Excellent customer service! Fast shipping! Great company to purchase from!
Super fast shipping, a perfect fit and really easy install. Great product.
very nice till this day, no damages or scratches upon delivery, this is the place to shop, great customer service, great prices, highly recommend e-trailer to anyone.
Great service, great communication throughout the purchase and shipping, great product.
Just received today.Not installed yet. Received wrong part number for this item but told "it was the same". Sent pictures of my items and have not heard back from customer service but i got email wanting review. So i would say to work on the priorities.
I am retired and not to savey on trailers, I needed a replacement hub for an older 16 ft trailer. These folks were very helpful, I was able to orde, receive, and install this new hub with nearly no problems.
I just received my items on time. Shipping was as expected. The Hub assembly was exactly as expected and installed without any issue in less than 30 minutes.
Hope this helps?
Awesome website easy to navigate great customer service shipping was incredibly fast I have use them on multiple projects and will use them in the future definitely
Excellent replacement axel. All parts were in kit and fit like they should. Extra long spindel makes it a good choice of any axel repair. Fast shipping.
I had a trailer hub go out right before the 4th of July holiday, went to etrailer as always place my order and it was delivered today on July 5th. I have already installed the Hub tested and everything is back the way it's supposed to be I am beyond happy with the product and thus fast friendly service I always get a etrailer. I will never use anyone else
I used these for a trail trailer that gets hammered on behind a highly modified Jeep and these hubs have no runout or issues of any kind. Great hubs for the money.
Super simple, just slide the hubs on and torque the axle nut. Hubs are pre loaded with grease to make the installation quick and easy.
Carrie did an excellent job in establishing exactly what I needed, and the installation of a new axle and hubs went perfectly. One note I would make is that the nut lock for both of the spindles remained lodged in the plastic spindle protectors and I almost missed finding them. A note in the packaging might be helpful.
trailer hubs were delivered on time. They were a perfect fit, greased bearings, install hubs took trailer for a drive. Everything worked perfect.
Thank You for all your help and advice.
The products are fine but the service was terrible. I ordered 8/17 with the expected delivery date of 8/20 but I did not receive my order until today, the 27th. I had to contact them 3 times to get the package resent, then my 2nd order was late again. The website is great but I will probably do business elsewhere in the future.
The entire hub came off my 16'trailer, wheel and all! I found everything I needed to repair it, as well as the spare parts to ensure it doesn't happen again. They had everything and a year later still going strong. Their selection was extensive and it made it so much less hassle being able to purchase all parts in one place. Reduced down time to a minimum. Great experience.
The Curt Trailer Hitch Receiver arrived, took about a week with free shipping. It was well packaged and the other items (Cotter Pin, 1/8" x 1-3/4" - 165649, Mounting Bracket 4-Pole Flat – 18144, 4-Pole Trailer Connector Cover – 20112, and Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 - Pre-Greased - 84550UC1-EZ) in my order, which arrived without any issues. I am an avid shopper online, always looking for the best deal not only on price but also total cost with shipping. This is not my first etrailer.com order, and most likely will not be my last. The hitch receiver was well made and has a good paint job. It fit my 2003 Toyota Tacoma snugly, however, I was able to mount it by myself in approximately a little more than an hour. The stock bumper had a towing capacity of 3,500 lbs., however it always had me worried since it is a 17-year old bumper with a few dents from previous owners. Now I do not have to worry about it and have a great place to connect the safety chains without having to get under my truck every time I connect to a trailer to secure it correctly. Read, who needs to read with a great installation video on etrailer.com; although the instructions were easy to read and refer to if I had any questions. After installation, the hitch receiver looked cleaner, sharper than the rest of my truck, which forced me to wash my truck!
Replaced all 4 hubs on an old flatbed trailer with these hubs. They arrived in 2 days, installed easily, and the price was great. I have bought from etrailer many times and they are always excellent to deal with.
Wil E.
5/23/2020
Excellent as usual from etrailer.
Fast shipping and great communication... hubs were good quality easy to install and everything included. Will definitely order again in the future.
Parts fit perfectly
Worked great!
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Grover C.
5/13/2018
Axel is still doing fine. Still havent replaced the second one though. We need to do that.