bing tracking image
  1. Trailer Brakes
  2. Dexter
  3. Disc Brakes
  4. 3500 lbs Axle
  5. Hub and Rotor
  6. 14 Inch Wheel
  7. 15 Inch Wheel
Dexter Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - E-Coat - 3,500 lbs
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Dexter

Dexter Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - E-Coat - 3,500 lbs

Part Number: K71-633-2
$752.91
Trailer Brakes
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Two brakes fit 3,500-lb E-Z lube axles with 14" to 15" wheels. E-coat finish on hubs, rotors, calipers, and brackets resists corrosion. Inner bearings (L68149), outer bearings (L44649), races, grease seals, and grease caps included. Great Prices for the best trailer brakes from Dexter. Dexter Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - E-Coat - 3,500 lbs part number K71-633-2 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (0)
  • Videos (1)
  • Photos

Dexter Trailer Brakes - K71-633-2

Highlights

  • Upgrades Stopping Power: Disc design delivers more consistent, shorter stops at highway speeds.
  • Bolts Right On: Pre-assembled kit replaces existing hubs with included rotors, calipers, and brackets.
  • Fights Rust and Corrosion: E-coat finish protects hubs, rotors, and calipers for freshwater and limited saltwater use.
  • Runs Cool and Smooth: Vented 10" rotors regulate heat and prevent brake fade during long stops.
  • No Guesswork Fit: Rated for 3,500-lb axles with 14"–15" wheels and a 5 on 4-1/2" bolt pattern.
  • Simplifies Maintenance: Self-adjusting calipers and grease caps with removable plugs ease upkeep on E-Z Lube axles.
Made in USA

Features to know about

Upgrade Old Drum Brakes for Better Control: 10" Disc Setup with 5 on 4-1/2" Hubs

When it’s time to move beyond worn or dragging drums, this Dexter disc brake kit makes the upgrade simple and reliable. The 10" hub-and-rotor assemblies fit 3,500-lb axles and work with 14" to 15" wheels. Each unit is preassembled for a smooth bolt-on swap that delivers more consistent stopping and noticeably shorter braking distances, even at highway speeds.

Corrosion Protection That Lasts: E-Coat Finish on All Major Components

Rust can ruin brake performance fast, especially in wet conditions. Every hub, rotor, caliper, and bracket in this kit gets an E-coat finish that resists corrosion for reliable braking in freshwater and limited saltwater environments. The protective layer stays intact through installation—no stripping or special prep needed—so the system stays cleaner and performs longer.

Built for Smooth, Even Braking: Self-Adjusting Calipers and Semi-Metallic Pads

Uneven braking or fade can make towing stressful. Dexter’s self-adjusting calipers maintain full surface contact for balanced braking across both wheels. Semi-metallic pads resist heat buildup and grip firmly for confident control on every stop. Combined with vented rotors that regulate temperature, this setup keeps braking smooth and consistent under load.

Ready-to-Mount Kit with Bearings and Seals Included

Everything’s here to get one axle ready to roll: two E-coated rotors, two hubs with bolts pressed in, two calipers, four semi-metallic pads, two caliper mounting brackets with hardware, plus bearings (L68149 inner and L44649 outer), matching races, grease seals (58846), thread sealant, and E-Z Lube grease caps. The result is a complete, durable system that installs easily and performs dependably mile after mile.

Specs

Weight and Capacity

  • Axle capacity: 3,500 lbs

Wheel Compatibility

  • Wheel size: 14" to 15"
  • Bolt pattern: 5 on 4-1/2"
  • Wheel bolt diameter: 1/2"

Dimensions

  • Rotor diameter: 10"

Brake Flange Configuration

  • Brake flange configuration: 4 bolt

Warranty

  • Limited warranty: 5-Year

Bearing, Race, and Seal Information

  • Bearings (included):
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included):
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

K71-633-00 Dexter Axle Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - E-Coat - 3,500 lbs





Video of Dexter Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - E-Coat - 3,500 lbs
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for What to Know About the Dexter Disc Brake Kit

Speaker 1: Today we're going to take a look at the Dexter e-coat, 10 inch hub and rotor disc brake kit, with the five on 4-1/2 inch bolt pattern, for 3,500 pound EZ Lube axles. Now these trailer brake assemblies will make it very easy to upgrade from drum brakes to disc brakes for better performance. Disc brakes'll give you more consistent stopping, even at highway speeds, dramatically shorter stopping distances, and they're easier and less expensive to maintain.This kit will include everything shown here on the table. Includes two full brake assemblies for one axle. You get the two e-coated rotors, the two e-coated hubs with the bolts already pressed in, two of the e-coated ductile iron calipers with the stainless steel mounting bolts. And they also have the semi-metallic brake pads included in the calipers.

Two of the e-coated caliper mounting brackets with the bolts and nuts to install it. And all the bearings, the bearing races, grease seals, and a EZ lube grease cap should need for installation.These parts are all an e-coat finish, provides corrosion resistance for fresh water, and limited salt water use. The rotors are a vented rotor design. You can see right here, this'll help regulate temperature to prevent overheating. The include hubs right here, these will replace your existing hubs.

The calipers they use are self adjusting calipers to ensure maximum surface contact for a nice smooth, equal braking. I mentioned the brake pads that are included, the brake pads are a semi-metallic brake pad. They help resist heat, provide excellent grip.The grease caps that are included with these, they do feature the removable plugs. And the reason they do that's for easy access to that grease zerk fitting that's onto the end of an EZ Lube axle. The mounting brackets that the calipers will attach to, they are made of a ductile iron.

They provide strength and durability. Now, one thing I do want to mention, is this whole kit does require a hydraulic brake actuator and brake lines, that are required for brakes to be activated. And because you're going to disc brakes, it does require a psi rating of at least 1,600 psi. Those items we do sell separately on our website. They're usually listed on this product page as a related product.These parts are made in the USA.

Again the specs on this, it's designed to fit 3,500 pound EZ Lube axles. The wheel size on this'll work from 14 inch up to 15 inch. The bolt pattern on the hub is the five on 4-1/2 inch bolt pattern. Wheel bolt diameter is a half inch diameter. The rotor diameter's 10 inch diameter on the rotor. On your mounting brake flange, you can see it is a four bolt brake flange configuration. Now the bearings, they do include both the inner and outer bearings. The inner bearing part number is going to be L68149, has a 1.378 inner diameter. The outer bearing is going to be a part number L44649, has a 1.063 inner diameter.Now, the bearing races that the bearings go in, they are already pre installed into the hubs, inner and outer. The grease seal, that's included, it is a double lip grease seal. It's part number 58846. Has an inner diameter of 1.719, and an outer diameter of 2.565. And then again, we mentioned the EZ Lube grease caps.But that should do it for the review on the Dexter e-coat, 10 inch hub and rotor disc brake kit, with the five on 4-1/2 inch bolt pattern, for 3,500 pound EZ Lube axles.

Ratings & Reviews

5.0

3 reviews
5 Stars
(3)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
by:
by:
3
3
true

See what our Experts say about this Dexter Trailer Brakes

  • Disc Brake Kit Recommendation for 3,500 lb Axle and 5 on 4-1/2" Bolt Pattern Idler Hub
    Hey Nicholas, thanks for reaching out! The rotors in the E-Coat Dexter Disc Brake Kit # K71-633-2 are being discontinued so even if we had everything else available separately in a different kit I'd recommend going with a different disc brake kit so you can easily find replacement parts in the future. I actually recommend using the DeeMaxx Disc Brake Kit # DE42FR instead because it has the Maxx coating which is far more resistant than other coatings that calipers and rotors have. The...
    view full answer...
  • Looking For Disc Brakes For Dual Axle Torsion Setup On Boat Trailer - 3,500lb Axle
    Hi Austin! Absolutely, I can help you verify whether the Dexter Disc Brake Kit # K71-633-2 is the correct disc brake setup for your tandem torsion axle boat trailer. This is a fit for 10" hubs, 3,500lb axles, and the 5 on 4-1/2" bolt pattern. The torsion suspension itself won’t change which brake kit you need. What we’ll want to verify is the axle capacity, wheel bolt pattern, brake mounting flange, and the bearing/seal sizes. Go ahead and send me the information from the axle tag, along...
    view full answer...
  • Brake Line Kits that Can Be Used with Dexter Disc Brake Assemblies
    Yes we do have Dexter brake lines that can be used with brake assemblies like the # K71-633-2 like with the part # HS496-252 for a tandem axle trailer or # 18SI-BLKIT which is for a single axle trailer.
    view full answer...
  • Installing Disc Brake Rotors with E-Coat Finish
    No, the E-Coat is not to be removed from the rotors. The E-coat is a protective coat that will prevent corrosion but it will not cause issues with coating your brake pads or have any negative impact. The Dexter Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - E-Coat - 3,500 lbs # K71-633-2 comes ready to install. I recommend packing the bearings of the hubs as usual using a grease packer like # PTW1218 and once that installation is done, then you can simply wipe down the other parts with...
    view full answer...
  • How to Determine Replacement Bearings For Shorelandr Trailer
    I believe you are asking if the hubs/bearings that come with Dexter Disc Brake Kit part # K71-633-2 will work on a Shorelandr or Lund trailer. Since I do not have the ability to cross list bearings by manufacturer. The best way to determine which bearings you need is to pull the hub and look at the numbers stamped on the side of the bearings or measure the spindle with a digital caliper. Since trailer manufacturers do not make this information readily available it is hard to say which...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Brake?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Written by:
Brian T

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.