How to Determine Replacement Bearings For Shorelandr Trailer
Updated 03/19/2020 | Published 03/18/2020 >
Question:
Will these hubs/bearings fit a Shorelander or Lund Trailer with a 3500# axle?
asked by: DALE H
Expert Reply:
I believe you are asking if the hubs/bearings that come with Dexter Disc Brake Kit part # K71-633-2 will work on a Shorelandr or Lund trailer.
Since I do not have the ability to cross list bearings by manufacturer. The best way to determine which bearings you need is to pull the hub and look at the numbers stamped on the side of the bearings or measure the spindle with a digital caliper. Since trailer manufacturers do not make this information readily available it is hard to say which bearings you need. I have attached a diagram that shows where on the spindle to measure.
Product Page this Question was Asked From
Dexter Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - E-Coat - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Standard Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 14 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: idler hub
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: brake hose
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Search Results: grease lubricants sealants adhesives
- Search Results: l68149 kit
- Search Results: 5 pin to 7 pin adapter
- Search Results: inner fender
- Search Results: 1/2" lug nuts
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - Oil
- Shop: DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Dexter Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - E-Coat - 3,500 lbs
- Video: Kodiak Disc Brakes: The Breakdown
- Q&A: Disc Brake Kit Recommendation for 3,500 lb Axle and 5 on 4-1/2" Bolt Pattern Idler Hub
- Q&A: Brake Line Kits that Can Be Used with Dexter Disc Brake Assemblies
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Shop: Trailer Wiring
- Video: Curt 7-Way to 4-Way/5-Way Trailer Adapter Review
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Video: What to Know About the Dexter Disc Brake Kit
- Video: DeeMaxx Disc Brakes | Expert Insights from the Manufacturer
- Video: Review of DeeMaxx Trailer Disc Brakes - Hub and Rotor Assembly Kit with Brake - DE42GR
- Video: An In-Depth Look at the Kodiak Disc Brakes
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: How to Bleed Your Trailer Surge Brakes


