See what our Experts say about this Yakima Roof Rack

• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform Rack
  The Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
  view full answer...
• How Much Does Complete Yakima LockNLoad Platform For 2019 Chevy Suburban Weigh?
  Hello Jake, thanks for reaching out. I will go ahead and list the weight of each product you mentioned below: - Yakima Skyline Towers 4 Pack # Y53TR - 6 lbs - Yakima Landing Pad 17 4 Pack # Y00243 - 2 lbs - LockNLoad SL Adapter 4 Pack # Y05042-2 - 1.5 lbs - Yakima LockNLoad Platform 60" Long x 54" Wide # Y05045 - 57 lbs Let me know if there is anything else I can do to help
  view full answer...
• Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side Rails
  For your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
  view full answer...
  
• Parts Needed To Mount A Yakima LockNLoad Platform On A 2024 Subaru Forester Wilderness
  Hey Jeff, There's going to be two ways to attach a Yakima LockNLoad Platform to the roof of your Forester. If mounting to crossbars you can use crossbar clamps # Y05039 (qty 2). If you decide you don't want to use the crossbars and instead use just the rails that run front-to-back then you would need TimberLine Towers # Y33TR (qty 4) and SL adapters # Y05042 (qty 2). Yakima recommends the 60" Long x 54" Wide # Y05045 for your Forester. This would require two sets of crossbar clamps...
  view full answer...
• Does Yakima LockNLoad Platform Fit Rhino-Rack Vortex Aero Crossbars
  Thanks for the photo, and yes, the LockNLoad will indeed fit to Rhino-Rack Vortex aero crossbars like your Rhino-Rack Vortex Crossbars for Retrax XR # RRVA180B-RRRLT600. You'll just need adapters to mount the platform, and here are the part numbers: - Yakima LockNLoad Platform Roof Tray # Y05045 - Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 I also wanted to note that the clamps come in a 2-pack, and you will need a total of 4 clamps, so order two of the # Y05039.
  view full answer...
  
• Recommended Platform Rack for a 2021 Subaru Ascent
  I did a little digging around and it looks like the roof on your 2021 Suabru Ascent is around 63 inches, making the Yakima LockNLoad Platform Roof Tray # Y05045 with the TimberLine Towers for Yakima Crossbars # Y33TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 near perfect. This platform rack measures 60" long, 54" wide, and will be a perfect addition to your Subaru for all your camping and luggage needs. This rack also has top channels so you can...
  view full answer...
• Largest Yakima LockNLoad Platform That Fits 2 Roof Rack Crossbars
  I checked with Yakima and the largest LockNLoad Platform Tray that will work with a roof rack system with two crossbars is the 60" Long x 54" Wide Yakima LockNLoad Platform Roof Tray # Y05045. To mount this tray to your BMW you will need the Crossbar Clamps for Yakima LockNLoad Platform # Y05039. The 84" Long x 49" Wide LockNLoad Platform # Y05047 does require at least three crossbars to mount. Using less than that would make it unstable, and not only void the warranty, but potentially...
  view full answer...
  
• What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?
  For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
  view full answer...
• Rhino-Rack Pioneer Platform Rack for 2019 Ford Expedition with Factory Rails and No Crossbars
  I actually had the chance to work with a 2019 Ford Expedition. While in the shop, I tested the RhinoRack roof racks we had shown to be compatible with the factory installed rails and to my surprise, the SX Series Legs # RRSX100 were not a fit. When trying to install them, I could tell they were not tall enough to catch on the rather large and triangular shape of the Expedition rails. The only style of legs or towers that will work is the kind that wraps around the entire bar, like the...
  view full answer...
  
• How To Install Yakima LockNLoad Over Truck Bed with Tonneau Cover
  In order to install the Yakima LockNLoad Platform Roof Tray above a tonneau cover on a truck bed you will need to install a set of tracks alongside the bed rails along with a crossbar system. The crossbar system is needed because the tray is not wide enough to reach just the mounting feet on the tracks. I have attached the needed parts below: Yakima JetStream Crossbars part # Y00427 Yakima Tracks for Roof Racks part # Y01135 Landing Pad Yakima Control Towers part # Y00221 (2) SkyLine Towers...
  view full answer...
• Can Yakima LockNLoad be Installed on 2021 Toyota 4Runner OEM Roof Rack
  Great question! The OEM roof rack on your 2021 Toyota 4Runner looks nice but it sits too low to your roof for the Yakima LockNLoad # Y05045-39 mounting hardware to fit. Instead of purchasing a roof rack AND the LockNLoad what I recommend doing is picking up the parts to mount the LockNLoad directly to the raised rails on your 4Runner: 60" Long x 54" Wide LockNLoad # Y05045 SL Adapter # Y05042-2 TimberLine Towers # Y33TR We don't have any brackets designed to fit with the ARB awnings...
  view full answer...
• Roof Basket That Mounts to Factory Raised Side Raids of 2019 Jeep Renegade
  There is one! It is called the Surco Safari Rack 5.0 for Raised Factory Rails # SPS5060-1101. It's size 60" x 50" which is the size Surco recommended for your 2019 Jeep Renegade. This system is a complete basket with sides and comes with adapters that clamp straight to your factory roof rails. I attached a video below with our review and explanation of the basket. It is similar to the very popular Yakima LockNLoad Platform Rack # Y05045. The LockNLoad platform though still needs separate...
  view full answer...
• Recommended Platform Rack System without Crossbars for 2019 Toyota Highlander XLE
  For a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts # Y05045, # Y53TR, # Y05042-2, # Y00242. This kit combines the Yakima Lock N Load Platform # Y05045 and Yakima Skyline towers # Y53TR to give you the platform without a crossbar for the low profile setup you're looking for. The additional parts are for the footpack and adapters to allow you to mount the towers to your 2019...
  view full answer...
• Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof Tent
  The Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
  view full answer...
• Will Yakima RoadShower Work With Yakima LockNLoad
  Yes, the Yakima RoadShower Portable Solar Shower part # Y29VR will work with the Yakima LockNLoad Platform Roof Trays like part # Y05045. I confirmed this with Yakima as well. There are no extra parts needed.
  view full answer...
• Which Roof Bike Racks are Compatible with Yakima LockNLoad Platform Roof Tray
  I have several bike rack options that are compatible with the Yakima LockNLoad Platform Roof Tray # Y05045, but the HighRoad # Y02114 isn't one of them. Below is a list of compatible roof bike carriers for the LockNLoad: Yakima HighSpeed # Y02115 (can attach with included rubber coated steel straps, or with optional SmarT-slot kit # Y02122 sold separately) Yakima FrontLoader # Y02103 Yakima ForkLift # Y02098 Yakima WheelHouse # Y02108 The FrontLoader # Y02103 is going to be your best...
  view full answer...
  
• How to Use the Yakima LockNLoad Platform Roof Tray On a Camper Shell
  In order to mount the Yakima LockNLoad Platform Roof Tray part # Y05045 on a truck bed camper shell I recommend using the Yakima HardTop SL Roof Rack part # Y01618 because it's a complete all around system that has everything that you need. It comes with adjustable tracks to accommodate many different roof rack accessories and aero crossbars for the best wind resistance. It's also low profile at around 4-6" tall. Unfortunately, there isn't any sort of Rhino-Rack Backbone Mounting System...
  view full answer...
• Roof Platform Tray that Fits 2015 Chevy Tahoe
  I have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
  view full answer...
• Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"
  You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
  view full answer...
• Is The Rhino Rack Stow It Utility Holder Compatible With Yakima Trays and Crossbars?
  Yes, the Stow It Utility Holder # RR95AB can be mounted in the t-slots on the Yakima LockNLoad Platform Roof Tray # Y05045. It will also work on the Yakima HD Crossbars # Y01158 as both systems are using the t-track mounting system.
  view full answer...
• Larger Roof Platform Tray that Fits 2023 Honda Pilot
  We have a larger platform tray that fits the roof of your 2023 Honda Pilot with flush side rails with the Yakima LockNLoad part # Y05045, # Y53TR, # Y05042-2, # Y00245 which will give you a platform that is 60 inch by 54 inch. There isn't a Rhino Rack option at this time that fits.
  view full answer...
• Lowest Profile Roof Tray that Fits 2023 Subaru Ascent with Raised Rails
  Yakima has a platform tray that fits the raised side rails of your 2023 Subaru Ascent with the Yakima LockNLoad # Y05045,# Y33TR, # Y05042-2 which will by far be your lowest profile option since a set of crossbars isn't required and it's a platform and not a basket so it is not very tall at all. The tray is 60" Long x 54" Wide.
  view full answer...
• Can 2023 Subaru Outback Wilderness Use Yakima LockNLoad Platform Without Crossbars
  Hi David, Yep, you can use the LockNLoad on your 2023 Subaru Outback Wilderness without having to use crossbars. I checked directly with Yakima for you to verify this, though you will need the larger 60" x 54" platform to fit the width of your Outback. Here is exactly what you'll need: - Yakima LockNLoad Platform Roof Tray - 60" Long x 54" Wide # Y05045 - TimberLine Towers # Y33TR - LockNLoad SL Adapter - Qty 4 # Y05042-2
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460
  The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
  view full answer...
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
  I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
  view full answer...
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• What is the Largest Cargo Box I Can Mount on My 2018 Jeep Grand Cherokee?
  The largest Thule cargo box that will fit your 2018 Jeep Grand Cherokee is the Thule Motion XT Rooftop Cargo Box - 22 cu ft - Titan Glossy # TH629907. If you want a Thule roof rack that is compatible with your 2018 Jeep Grand Cherokee that will be compatible with the Thule Motion XT, I recommend the following system: - Thule WingBar Evo Crossbars - Aluminum - Silver - 53" Long - Qty 2 # TH711400 - Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 # TH460R - Fit Kit for Thule...
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback Wagon
  I went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
  view full answer...
• Best Roof Rack for 2020 Kia Soul with Fixed Mounting Points
  The best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
  view full answer...
• Roof Rack and Rear Loading Kayak Carrier Recommendation for a 2021 Honda CR-V
  For your application I recommend going with a Yakima setup, both for the roof rack and for the kayak carrier. To install a Yakima roof rack on your 2021 Honda CR-V you need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) The Rhino-Rack Nautic 581 Rear Loading Kayak Carrier # RR581 will fit the channels of the Yakima system just fine and it's a good rear-loading kayak carrier, I just really like...
  view full answer...
• Roof Rack Recommendation for a 2021 Toyota RAV4 with Flush Rails and Moonroof Clearance
  For your application I recommend installing the Yakima JetStream roof rack on your 2021 Toyota RAV4 with flush rails: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 23 - # Y98FR You honestly shouldn't have any clearance issues with any roof rack when it comes to the moonroof, but the Yakima towers tend to sit on the higher end so you'll get as much clearance as possible. Most roof rack manufacturers don't recommend opening up a sun/moonroof with the roof...
  view full answer...
• How to Carry a Kayak and a Canoe on a 2014 Subaru Outback Wagon
  I do have an option for you but we don't really have any feasible solutions for you to carry both a kayak and canoe on the roof of your 2014 Subaru Outback Wagon at the same time. Instead, I recommend placing both the kayak and canoe on a pull behind trailer like the Malone EcoLight Trailer part # MAL. In order to pull a trailer with your vehicle you will need a trailer hitch, wiring harness, and ball mount/hitch ball. For this I recommend using the Draw-Tite Trailer Hitch part # 75673,...
  view full answer...
• What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?
  I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
  view full answer...
• Parts Needed to Install Round Yakima Crossbar Roof Rack on 2020 Toyota Highlander
  Hey Michael, it sounds like you have a set of round Yakima crossbars (among other things) that you'd like to reuse on your 2020 Toyota Highlander that has factory fixed mounting points. For that the complete rack with everything including the bars would normally be the part # Y63FB but since you have the bars already what you'd want is the part numbers # Y53TR, # Y46VR, and # Y03536 which is everything you'd need minus crossbars. If you have a different setup currently let me know and...
  view full answer...
• Yakima Roof Rack Parts for 2018 Subaru WRX
  Yes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
  view full answer...
• How Much Does Complete Yakima LockNLoad Platform For 2019 Chevy Suburban Weigh?
  Hello Jake, thanks for reaching out. I will go ahead and list the weight of each product you mentioned below: - Yakima Skyline Towers 4 Pack # Y53TR - 6 lbs - Yakima Landing Pad 17 4 Pack # Y00243 - 2 lbs - LockNLoad SL Adapter 4 Pack # Y05042-2 - 1.5 lbs - Yakima LockNLoad Platform 60" Long x 54" Wide # Y05045 - 57 lbs Let me know if there is anything else I can do to help
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform Rack
  The Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
  view full answer...
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side Rails
  For your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
  view full answer...
  
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform K
  You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
  view full answer...
  
• How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof Rack
  You will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
  view full answer...
• What is Height of LockNLoad Platform Rack for LEER Camper Topper on a 2020 Nissan Frontier
  To install the LockNLoad on your 2020 Nissan Frontier 5' Bed LEER camper topper you need the following parts: - 55" Long x 49" Wide Yakima LockNLoad Platform Roof Tray # Y05044 - TrackTowers # Y52AV - LockNLoad SL Adapter # Y05042-2 The TrackTowers sit about 2" tall and the LockNLoad is around 4" tall so you'll be adding about 6" to the height of your LEER topper which is pretty standard for a track mount platform. You'll be pretty hard-pressed to find something only sitting 3-1/2"...
  view full answer...
• Recommended Platform Rack for a 2021 Subaru Ascent
  I did a little digging around and it looks like the roof on your 2021 Suabru Ascent is around 63 inches, making the Yakima LockNLoad Platform Roof Tray # Y05045 with the TimberLine Towers for Yakima Crossbars # Y33TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 near perfect. This platform rack measures 60" long, 54" wide, and will be a perfect addition to your Subaru for all your camping and luggage needs. This rack also has top channels so you can...
  view full answer...
• What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?
  For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
  view full answer...
• Rhino-Rack Pioneer Platform Rack for 2019 Ford Expedition with Factory Rails and No Crossbars
  I actually had the chance to work with a 2019 Ford Expedition. While in the shop, I tested the RhinoRack roof racks we had shown to be compatible with the factory installed rails and to my surprise, the SX Series Legs # RRSX100 were not a fit. When trying to install them, I could tell they were not tall enough to catch on the rather large and triangular shape of the Expedition rails. The only style of legs or towers that will work is the kind that wraps around the entire bar, like the...
  view full answer...
  
• Can Yakima LockNLoad be Installed on 2021 Toyota 4Runner OEM Roof Rack
  Great question! The OEM roof rack on your 2021 Toyota 4Runner looks nice but it sits too low to your roof for the Yakima LockNLoad # Y05045-39 mounting hardware to fit. Instead of purchasing a roof rack AND the LockNLoad what I recommend doing is picking up the parts to mount the LockNLoad directly to the raised rails on your 4Runner: 60" Long x 54" Wide LockNLoad # Y05045 SL Adapter # Y05042-2 TimberLine Towers # Y33TR We don't have any brackets designed to fit with the ARB awnings...
  view full answer...
• Parts Needed to Add Yakima LockNLoad Platform on a 2021 Nissan NV 3500
  Hey Garrett, thanks for reaching out! I'm pretty sure at the time that Bob wrote that answer Yakima had only come out with their crossbar clamps for the LockNLoad and they were geared up to get all of the direct fits in their system but we were still waiting on that. Nevertheless, there is a way to install the LockNLoad directly to your 2021 Nissan NV 3500 and you had almost all of the pieces laid out in your comment (might as well give you the title "Expert" as well!). The only parts...
  view full answer...
• Recommended Platform Rack System without Crossbars for 2019 Toyota Highlander XLE
  For a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts # Y05045, # Y53TR, # Y05042-2, # Y00242. This kit combines the Yakima Lock N Load Platform # Y05045 and Yakima Skyline towers # Y53TR to give you the platform without a crossbar for the low profile setup you're looking for. The additional parts are for the footpack and adapters to allow you to mount the towers to your 2019...
  view full answer...
• What is Needed to Add Yakima LockNLoad to 2021 Subaru Outback With Side Rails
  Hey Jeremy, I believe you're asking what you need to mount the Yakima LockNLoad Platform Roof Tray # Y05044 directly to the side rails on your 2021 Subaru Outback, and if so, I verified directly with Yakima the exact parts you'll need: - SkyLine Towers # Y53TR - Landing Pad 27 # Y46VR - LockNLoad SL Adapters # Y05042-2 And that's it! These parts are all need to mount the LockNLoad directly to your Outback.
  view full answer...
• Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof Tent
  The Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
  view full answer...
• Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?
  I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
  view full answer...
• Roof Platform Tray that Fits 2015 Chevy Tahoe
  I have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
  view full answer...
• Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"
  You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
  view full answer...
• Larger Roof Platform Tray that Fits 2023 Honda Pilot
  We have a larger platform tray that fits the roof of your 2023 Honda Pilot with flush side rails with the Yakima LockNLoad part # Y05045, # Y53TR, # Y05042-2, # Y00245 which will give you a platform that is 60 inch by 54 inch. There isn't a Rhino Rack option at this time that fits.
  view full answer...
• Lowest Profile Roof Tray that Fits 2023 Subaru Ascent with Raised Rails
  Yakima has a platform tray that fits the raised side rails of your 2023 Subaru Ascent with the Yakima LockNLoad # Y05045,# Y33TR, # Y05042-2 which will by far be your lowest profile option since a set of crossbars isn't required and it's a platform and not a basket so it is not very tall at all. The tray is 60" Long x 54" Wide.
  view full answer...
• How To Use Yakima LockNLoad Platfrom Rack On 2016 Subaru Outback
  I do have an option for you to use the Yakima LockNLoad Platform Rack but you must use their mounting feet as it will not work with the factory crossbars on a Subaru Outback. I have attached below a full list of parts needed to get the platform to fit. Yakima LockNLoad Platform Rack for Crossbars part # Y05044-39 (Recommended Size) SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 27 for Yakima SkyLine And Control Towers part # Y46VR LockNLoad SL Adapter for Yakima SkyLine and...
  view full answer...
• Yakima LockNLoad that Fits 2023 Toyota RAV4
  Yakima actually has a LockNLoad that fits your 2023 Toyota RAV4 with the part numbers # Y05044, # Y33TR, # Y05042-2 but the Yakima platform can't fit the Backbone system.
  view full answer...
• Can 2023 Subaru Outback Wilderness Use Yakima LockNLoad Platform Without Crossbars
  Hi David, Yep, you can use the LockNLoad on your 2023 Subaru Outback Wilderness without having to use crossbars. I checked directly with Yakima for you to verify this, though you will need the larger 60" x 54" platform to fit the width of your Outback. Here is exactly what you'll need: - Yakima LockNLoad Platform Roof Tray - 60" Long x 54" Wide # Y05045 - TimberLine Towers # Y33TR - LockNLoad SL Adapter - Qty 4 # Y05042-2
  view full answer...
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra Groove
  I believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
  view full answer...
• Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track System
  The Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
  view full answer...
• Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack Tracks
  Yes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
  view full answer...
• Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory Rails
  For your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
  view full answer...
• Roof Rack Recommendation for a 2008 Hummer H3 with Factory Tracks
  For a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
  view full answer...
• Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control Towers
  If the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
  view full answer...
• Roof Rack for 2007 Hummer H3 with Roof Rack Channels
  For your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
  view full answer...
• Replacement Yakima Landing Pad For Roof Rack Tower
  The landing pad you have is either going to be in the kit Landing Pad 1 # Y00221 or Landing Pad 4 # Y00224. The landing pad 1 has a more square shaped channel nut while the landing pad 4 has a more rectangular channel nut.
  view full answer...
• Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3
  If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
  view full answer...
• Roof Rack Recommendation for 2005 Chrysler Town and Country Van
  Your 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
  view full answer...
• Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge Caravan
  To carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
  view full answer...
• Roof Rack Recommendation for 2009 Hummer H2
  For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
  view full answer...
• Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding Doors
  When installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
  view full answer...
• Recommended Roof Rack for a 2012 Land Rover Range Rover Sport
  The roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
  view full answer...
• How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2
  To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
  view full answer...
• Recommended Bike Carrier for Hummer H3
  The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
  view full answer...
• Recommended Roof Rack and Mud Flaps for 2007 Hummer H3
  For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
  view full answer...
• Roof Rack Fits for 2003 Chevrolet Suburban
  The current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
  view full answer...
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra Groove
  I believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
  view full answer...
• Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track System
  The Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
  view full answer...
• Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack Tracks
  Yes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
  view full answer...
• Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory Rails
  For your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
  view full answer...
• Roof Rack Recommendation for a 2008 Hummer H3 with Factory Tracks
  For a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
  view full answer...
• Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control Towers
  If the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
  view full answer...
• Roof Rack for 2007 Hummer H3 with Roof Rack Channels
  For your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
  view full answer...
• Replacement Yakima Landing Pad For Roof Rack Tower
  The landing pad you have is either going to be in the kit Landing Pad 1 # Y00221 or Landing Pad 4 # Y00224. The landing pad 1 has a more square shaped channel nut while the landing pad 4 has a more rectangular channel nut.
  view full answer...
• Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3
  If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
  view full answer...
• Roof Rack Recommendation for 2005 Chrysler Town and Country Van
  Your 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
  view full answer...
• Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge Caravan
  To carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
  view full answer...
• Roof Rack Recommendation for 2009 Hummer H2
  For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
  view full answer...
• Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding Doors
  When installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
  view full answer...
• Recommended Roof Rack for a 2012 Land Rover Range Rover Sport
  The roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
  view full answer...
• How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2
  To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
  view full answer...
• Recommended Bike Carrier for Hummer H3
  The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
  view full answer...
• Recommended Roof Rack and Mud Flaps for 2007 Hummer H3
  For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
  view full answer...
• Roof Rack Fits for 2003 Chevrolet Suburban
  The current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
  view full answer...

Do you have a question about this Roof Rack?