Yakima LockNLoad Platform Rack for Fixed Mounting Points - SkyLine Towers - Aluminum

See what our Experts say about this Yakima Roof Rack

• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• How Can I Mount a Pioneer Platform to My RetraxPRO Hard Cover on My 2022 Ram 1500?
  I have an answer for you. Without knowing the exact bed size or whether you have RamBox installed on your 2022 Ram 1500, if you are looking to use a Retrax Pro model with the included rails like the RetraxPRO Hard Tonneau Cover # RTT-80245, I cannot guarantee that the Landing Pad 26 # Y75ZR fit into the dimensions of the tracks of the Retrax tonneau cover. Yakima unfortunately does not test their landing pads on other manufacturers' tracks, so there is no way to tell if the LockNLoad platform...
  view full answer...
• How To Attach the Yakima LockNLoad To a Yakima OverHaul HD On a Toyota Tacoma
  Yes, the Crossbar Clamps for Yakima LockNLoad Roof Rack part # Y05039 is what you need to install the Yakima LockNLoad Platform Roof Rack part # Y05044 on the Yakima OverHaul HD Truck Bed Ladder Rack part # Y01151-5868 which is a confirmed fit for your 2018 Toyota Tacoma. That said, you will need to order two sets of the clamps. The Yakima OverHaul HD Truck Bed Ladder Rack when paired with the Yakima LockNLoad Platform Roof Rack is by far the best option to carry a tent on your Tacoma...
  view full answer...
• What is Needed to Add Yakima LockNLoad to 2021 Subaru Outback With Side Rails
  Hey Jeremy, I believe you're asking what you need to mount the Yakima LockNLoad Platform Roof Tray # Y05044 directly to the side rails on your 2021 Subaru Outback, and if so, I verified directly with Yakima the exact parts you'll need: - SkyLine Towers # Y53TR - Landing Pad 27 # Y46VR - LockNLoad SL Adapters # Y05042-2 And that's it! These parts are all need to mount the LockNLoad directly to your Outback.
  view full answer...
• Will Yakima LockNLoad FIt 2010 Toyota RAV4 Factory Roof Rack
  Hey Austin, Yep, you can mount the Yakima LockNLoad Platform Roof Tray # Y05044 to the factory roof rack of your 2010 Toyota RAV4. You'd just need to get two sets of the Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 so you can attach the platform to your RAV4 and you'd be set.
  view full answer...
• Can Yakima DeepSpace 10 Rooftop Cargo Box Be Installed on Yakima LockNLoad Platform Tray
  The Yakima DeepSpace 10 Rooftop Cargo Box # Y65RR can be mounted to the Yakima LockNLoad Platform Roof Tray, like part # Y05044, but you'll be using the clamps for the installation since the DeepSpace 10 currently (July 2023) doesn't have any T-Slot hardware. I confirmed with Yakima that this will work though so you'll be good to go with this combination!
  view full answer...
• Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform K
  You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
  view full answer...
  
• What Tie Downs Can I Use With The Yakima LockNLoad # Y05044
  The Ladder Pegs for Rhino-Rack Heavy-Duty Crossbars - 3" Tall # RSLP will not fit in the tracks of the Yakima LockNLoad Platform Roof Tray # Y05044, but I have something similar that you can use with the LockNLoad. The Ladder Pegs are made to fit in the rhino rack heavy duty crossbars # RB1375B-2. You can use the Yakima Eye Bolts # Y01162 with the lock in load on your 2019 Jeep Grand Cherokee.
  view full answer...
• What is Height of LockNLoad Platform Rack for LEER Camper Topper on a 2020 Nissan Frontier
  To install the LockNLoad on your 2020 Nissan Frontier 5' Bed LEER camper topper you need the following parts: - 55" Long x 49" Wide Yakima LockNLoad Platform Roof Tray # Y05044 - TrackTowers # Y52AV - LockNLoad SL Adapter # Y05042-2 The TrackTowers sit about 2" tall and the LockNLoad is around 4" tall so you'll be adding about 6" to the height of your LEER topper which is pretty standard for a track mount platform. You'll be pretty hard-pressed to find something only sitting 3-1/2"...
  view full answer...
• Yakima LockNLoad Fit For 2022 Chevy Suburban With Factory Roof Rack
  Hello Dave, Your 2022 Chevy Suburban with factory crossbars can mount the LockNLoad, but there are no cargo boxes compatible with it, including a Roam Adventure or any other box. If you did want to use the LockNLoad for other purposes, I verified with Yakima the correct LockNLoad size as well as clamps needed to fit your '22 Suburban: - Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide # Y05044 - Two Sets Of: Crossbar Clamps for Yakima LockNLoad # Y05039 Otherwise,...
  view full answer...
• How Many Crossbar Clamps Are Needed for Yakima LockNLoad Platform Rack
  In order to install the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide # Y05044 you will need two sets of the Crossbar Clamps for Yakima LockNLoad Platform Rack - Qty 2 # Y05039. So that will be 4 clamps total. Instead of buying them separately you can get the Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 55" Long x 49" Wide # Y05044-39 which comes with everything you need.
  view full answer...
• Crossbar Spacing For A Yakima LockNLoad Platform Rack On A 2018 Lexus GX 460
  The Yakima LockNLoad Platform Roof Tray # Y05044 (K) you're looking at requires that the spacing from the center of the front crossbar to the center of the rear crossbar needs to be 27" to 33" apart. The platform rack will most likely overlap with the sunroof.
  view full answer...
• How To Attach Yakima LockNLoad Platform Roof Tray To Factory Crossbars of 2020 Honda Passport
  The Yakima LockNLoad Platform Roof Tray part # Y05044 will fit to your factory cross bars with 2 sets of the Crossbar Clamps for Yakima LockNLoad Platform part # Y05039. This will be as low profile as possible with the factory cross bars, the clamps are 1" tall and the platform itself is about 4" tall.
  view full answer...
  
• How to Add Platform Rack to 2020 Toyota Highlander With Naked Roof
  While you can add a platform rack to your 2020 Toyota Highlander, I checked with our manufacturers and there isn't a direct-mount option for your vehicle. So the only option for your Highlander, assuming it does have a naked roof without flush rails, is to add a roof rack which you can then add the platform rack to. There is one option for this from Yakima, and I verified with them the correct parts for the rack, as well as the correct size of platform needed. The exact parts that will...
  view full answer...
• Fitting Yakima LockNLoad Platform Roof Tray to Round Crossbars
  The Yakima LockNLoad can fit round crossbars but you will need to use the Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039. RoundBar SL Adapters won't allow you to mount the platform to the rack, as they are designed to mount crossbars to certain Yakima roof rack towers. The Crossbar Clamps # Y05039 will fit LockNLoad trays like the Yakima LockNLoad Platform Roof Trays, which come in different sizes such as the 55" Long x 49" Wide # Y05044 and 84" Long x 62" Wide # Y05049.
  view full answer...
• Height of Yakima LockNLoad Above Crossbar Clamps and Cargo Basket Fit
  The Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 are a total of 1 inch in height, but when they are clamped around your crossbars, the LockNLoad is almost directly on the crossbars, as it attaches right to the top of the clamp. These clamps will work with the Yakima LockNLoad Platform Roof Trays like the 55" Long x 49" Wide # Y05044 or 84" Long x 54" Wide # Y05048. As for the mounts, those will not work for a LockNLoad, and while you can't mount a rooftop cargo box to...
  view full answer...
• Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?
  I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
  view full answer...
• Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side Rails
  In order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
  view full answer...
• Parts Needed to Install Yakima LockNLoad on 2018 Subaru Outback Limited for Rhino Rack Batwing
  The easiest solution would be to order the part # Y05044-39 as this is a kit that includes both the # Y05044 and the # Y05039. The Rhino Rack Batwing part # RR33400 would easily fit to this as well since it can attach to the channels that are present on top of the LockNLoad.
  view full answer...
• Smallest Yakima Lock N Load Platform For 2018 Ford Expedition
  The smallest size Lock N Load Platform made is 55 inches long by 49 inches wide # Y05044. You can use the same adapters and towers for this to fit on your 2018 Ford Expedition. This is the closest size to your panel you have.
  view full answer...
• Is There A Yakima LockNLoad Platform For My 2018 Subaru Forester XT?
  Looking at the available platform style racks for your Forester, we've found that the best fit for your 2018 Subaru Forester is going to be the 60 inch long by 49 inches wide Rhino-Rack Pioneer SX Platform Rack # JA9133. There is no Lock N Load # Y05044 that we have confirmed to fit on your Subaru. This is the same exact thing just a different brand. This rack comes with the SX feet that will connect to your factory raised rails. You do not have to buy the Timberline Lockable Brackets for...
  view full answer...
• Will Small Thule Caproc k Platform Tray Fit 2024 Subaru Forester with Raised Rails
  According to my research you'll be able to install the Small version of the Thule Caprock on your 2024 Subaru Forester. The parts you'll need to accomplish this are the following: - Thule Caprock Platform Roof Tray 59" Long x 52-3/8" Wide # TH58YE - Evo Raised Rail Feet # TH710401 - Lock Core Kit # TH450400 (optional) Yakima lists their 55" Long x 49" Wide LockNLoad Platform Roof Tray # Y05044 fitting your vehicle with their specific leg kit and they have photo evidence of this platform...
  view full answer...
• Can I Use The Yakima LockNLoad Platform Tray If My Facrory Crossbars Don't Adjust On My 2020 Rav4?
  The Yakima LockNLoad Platform Roof Tray # Y05044 is a pretty versatile tray as it gives you multiple points to mount it to the crossbars on your 2019 Toyota Rav4. All you need is two sets of the Crossbar Clamps # Y05039 and then once you put the tray on your roof rack, position it over your factory bars and use the clamps to secure it down! No need to have adjustable crossbars, the tray will have many different spots to connect the clamps! I've included a video of the LockNLoad so you...
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Can I Put A 60" Long Crossbar On A 2022 Subaru Outback
  Hello Joe, thanks for reaching out. Yes, it is possible to put a 60" (or longer) crossbar on your 2022 Subaru Outback. I will need to verify a bit more vehicle information before I can recommend the correct parts. Does your outback happen to be the Wilderness edition? Let me know. Also please verify that your Outback has the factory installed raised rails running from front to back. Let me know and I will be able to narrow down the right roof rack. For example, if you do have the Wilderness...
  view full answer...
• Roof Rack For A 2023 Toyota 4Runner And A Yakima SkyBox
  We can definitely help set you up with a Yakima SkyBox NX 16 # Y95AV for the top of your 2023 Toyota 4Runner with the factory raised rails. All you will need to do is install a roof rack with crossbars. Since you are doing a Yakima brand roof box, it is best to go with a Yakima brand roof rack as well, since everything will be directly compatible. The Yakima JetStream crossbars will be a great fit for your vehicle. The complete roof rack consists of the following parts: Yakima JetStream...
  view full answer...
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
  Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
  view full answer...
• Roof Rack System for 2026 Chrysler Pacifica
  Hey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
  view full answer...
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER Cap
  Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
  The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
  view full answer...
• Can I Use the Same Yakima Landing Pad on my 2025 Subaru Outback That I Used on My 2019
  That's a great question, Maryann! No, you can't use your existing Yakima Landing Pad 15 # Y00241 on your 2025 Subaru Outback Wagon. Instead, you would need to get the Yakima Landing Pad 27 # Y46VR. You will still be able to use your SkyLine Towers # Y53TR and just swap them out for the Landing Pad 27. Congrats on the new Subaru! What are you usually carrying on the roof?
  view full answer...
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Can I Put A 60" Long Crossbar On A 2022 Subaru Outback
  Hello Joe, thanks for reaching out. Yes, it is possible to put a 60" (or longer) crossbar on your 2022 Subaru Outback. I will need to verify a bit more vehicle information before I can recommend the correct parts. Does your outback happen to be the Wilderness edition? Let me know. Also please verify that your Outback has the factory installed raised rails running from front to back. Let me know and I will be able to narrow down the right roof rack. For example, if you do have the Wilderness...
  view full answer...
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Can I Use the Same Yakima Landing Pad on my 2025 Subaru Outback That I Used on My 2019
  That's a great question, Maryann! No, you can't use your existing Yakima Landing Pad 15 # Y00241 on your 2025 Subaru Outback Wagon. Instead, you would need to get the Yakima Landing Pad 27 # Y46VR. You will still be able to use your SkyLine Towers # Y53TR and just swap them out for the Landing Pad 27. Congrats on the new Subaru! What are you usually carrying on the roof?
  view full answer...
• Will Malone SteelTop Roof Rack Fit 2025 Subaru Outback
  Hi John; is your 2025 Outback the Wilderness model? The Malone SteelTop Roof Rack # MPG203 only fits the rails on the Wilderness. This will not fit the factory rails on the regular Outback models. If that is what you have, let me know in the comments below and I can see what else is available. Are you looking for a specific crossbar length?
  view full answer...
• Yakima Landing Pad For 2024 Subaru Outback Premium With Factory Roof Rails
  Hello Greg. Our records show the correct landing pad for the 2024 Subaru Outback Premium with factory roof rails to be the Landing Pad 27 part # Y46VR. This will work with either the Yakima SkyLine or Control towers.
  view full answer...
• Parts Needed to Install Round Yakima Crossbar Roof Rack on 2020 Toyota Highlander
  Hey Michael, it sounds like you have a set of round Yakima crossbars (among other things) that you'd like to reuse on your 2020 Toyota Highlander that has factory fixed mounting points. For that the complete rack with everything including the bars would normally be the part # Y63FB but since you have the bars already what you'd want is the part numbers # Y53TR, # Y46VR, and # Y03536 which is everything you'd need minus crossbars. If you have a different setup currently let me know and...
  view full answer...
• Will The Yakima Landing Pad For 2018 Subaru Outback Work On A 2025 Outback?
  Hello Joe, thanks for reaching out. I am sorry to say that the Yakima landing pad for the 2018 Subaru Outback will not carry over to the 2025 model. The 2018 Outback uses the 8000241 Landing Pad 15. The 2025 model uses the 8000254 Yakima Landing Pad 27. Both pads work with the Timber Line towers, so as long as that is what you have, you can re-use them. You will need the new 8000254 landing pad part # Y46VR for the 2025 model. You should be able to re-use your crossbars too. We recommend...
  view full answer...
• What is Needed to Add Yakima LockNLoad to 2021 Subaru Outback With Side Rails
  Hey Jeremy, I believe you're asking what you need to mount the Yakima LockNLoad Platform Roof Tray # Y05044 directly to the side rails on your 2021 Subaru Outback, and if so, I verified directly with Yakima the exact parts you'll need: - SkyLine Towers # Y53TR - Landing Pad 27 # Y46VR - LockNLoad SL Adapters # Y05042-2 And that's it! These parts are all need to mount the LockNLoad directly to your Outback.
  view full answer...
• Yakima Landing Pads For A 2020 Subaru Outback Wagon
  Hi Deborah! We do have Landing Pads for your 2020 Subaru Outback Wagon, but the Landing Pad 38 for Yakima SkyLine and Control Towers - Qty 2 # Y87MX is specifically for a 2015+ Ford Transit. So with that said, you are looking for the following part: Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 # Y46VR It doesn't look like Yakima offers this in a 2 pack though, so you would need to get all 4. If you don't already have them, the following parts would complete the roof rack...
  view full answer...
• Roof Rack Replacement for OEM Crossbars to Carry Rooftop Tent on 2022 Subaru Outback Wagon
  I'd be more than happy to help! To utilize a rooftop tent, like the Yakima SkyRise HD # Y07437, you'll actually need to remove your factory rack and replace it with an aftermarket kit. I really like the Yakima JetStream roof racks because they are not only great quality, but the legs have adjustments in them to ensure that you get the best fit possible. For this setup you'll need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 27 - # Y46VR Lock...
  view full answer...
  
• Recommended Flush Mounted Roof Rack for a 2024 Subaru Outback Wagon w/ Raised Rails
  To add a roof rack that does not extend past the raised rails on your 2024 Subaru Outback Wagon, I recommend the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y58UV Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 item # Y46VR I have attached a couple of pictures below that will give you an idea of what this system will look like once installed. This aero bar roof rack...
  view full answer...
  
• How To Replace Factory Crossbars On 2020 Subaru Outback for Rooftop Tent
  The highest capacity roof rack option we offer for a 2020 Subaru Outback Wagon which will replace the factory crossbars is the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y46VR which will provide a 165 lb capacity. I'd also like to point out that most tents have a built-in support device (ladder) so the roof rack only needs to be rated for a certain amount, usually 165 lbs. The Thule system only provides a 130 lb weight capacity.
  view full answer...
• How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof Rack
  You will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
  view full answer...
• Heavy Duty Roof Rack Recommendation for 2021 Subaru Outback Wagon
  For your 2021 Subaru Outback Wagon the Yakima HD roof rack kit part # Y01156, # Y00148, # Y46VR, and Y03541 is a confirmed fit and would work great. This is a higher capacity roof rack that has crossbars that are rated for 220 lbs. This does not require removing the roof rails either. I attached install instructions link for this for you to check out as well.
  view full answer...
• What Yakima Landing Pad Do I Need For My 2021 Subaru Outback
  Your 2021 Subaru Outback Wagon needs Yakima Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4, part # Y46VR. This Landing Pad provides the mounting points for your Yakima Skyline or Control towers. If you are using the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4,part # Y53TR, you need to make sure you are using the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03536....
  view full answer...
• What is the Best Roof Rack for a 2024 Subaru Outback Wagon w/out the Wilderness Rails?
  The best roof rack for a 2024 Subaru Outback Wagon without the Wilderness rails is the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points - Qty 4 item # Y53TR Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 item # Y46VR
  view full answer...
• Roof Rack For 2021 Subaru Outback For Rooftop Tent
  To use a rooftop tent on your 2021 Subaru Outback, you will need to add a roof rack, which will allow you to choose from a couple of different tent options. First let's start with the rack you'll need, which is from Yakima and consists of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 27 for Yakima SkyLine and Control Towers # Y46VR This is going to give your '21 Outback a very quiet,...
  view full answer...
• Recommended Roof Rack for 2024 Subaru Outback
  For a stylish roof rack that keeps the noise down on your 2024 Outback I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00425 -SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream bars have a sleak look with an asymmetrical JetFlow shape. This combined with the built-in WindRidges seriously reduces vibration...
  view full answer...
• Can I Use The Thule Hullavator On Factory Crossbars With No Overhang?
  The Thule Hullavator # TH898 will require crossbars that overhang the towers by 4' - 8". There is not any kind of adapter that is made for this purpose. Your best bet will be to replace the factory crossbars with aftermarket crossbars that have some overhang. Since your 2023 Subaru Outback already has the factory installed rails running front to back, you will be able to mount crossbars using these rails. I recommend the Yakima JetStream Roof Rack, which will consist of the following parts: Yakima...
  view full answer...
• Recommended Roof Rack For a 2023 Subaru Outback
  I recommend using the Yakima JetStream roof rack on your 2023 Subaru Outback. These will attach to your raised factory crossbars. Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The Yakima Same Key System # Y07208 can be used to secure the towers to your Subaru. This kit includes 8 lock cores of which 4 will...
  view full answer...
• Best Way to Fit MajorShady 270 Awning and SkyBox NX 16 on a 2024 Subaru Outback Wagon
  While I really do like the Yakima LockNLoad Platform Rack # Y05044-39, there are two issues with what you're wanting to do; the SkyBox NX 16 has the mounting areas recessed so even if you installed the T-Slot kit it wouldn't be able to fit on the LockNLoad, plus the weight of the LockNLoad, MajorShady 270, and the cargo box would be 137 lbs which means you can only load up to 28 lbs of luggage in the box. Instead, I recommend replacing the OEM roof rack on your 2024 Subaru Outback Wagon...
  view full answer...
• Yakima Jetstream Roof Rack for 2021 Subaru Outback
  The Yakima JetStream roof rack part numbers # Y00425, # Y53TR, and # Y46VR is an extremely nice roof rack for your 2021 Subaru Outback Wagon. This is what I would go with because in terms of quality, ease of use/install, quietness, and durability it really is outstanding.
  view full answer...
• Replacement Cover For Yakima LandingPad 27 On A 2022 Subaru Outback Wagon
  I spoke with Yakima, and they said for your Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR, you can use the: -Replacement Cover for Yakima LandingPads # Y8890029 as a replacement cover.
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Parts Needed To Mount A Yakima LockNLoad Platform On A 2024 Subaru Forester Wilderness
  Hey Jeff, There's going to be two ways to attach a Yakima LockNLoad Platform to the roof of your Forester. If mounting to crossbars you can use crossbar clamps # Y05039 (qty 2). If you decide you don't want to use the crossbars and instead use just the rails that run front-to-back then you would need TimberLine Towers # Y33TR (qty 4) and SL adapters # Y05042 (qty 2). Yakima recommends the 60" Long x 54" Wide # Y05045 for your Forester. This would require two sets of crossbar clamps...
  view full answer...
• Options For Putting A Yakima Lock N Load Platform On My 2021 Jeep Grand Cherokee Trailhawk
  The lowest profile option for your 2021 Jeep Grand Cherokee Trailhawk would be to get the Landing Pad 18 # Y00244 for the Skyline Towers # Y53TR and use the SL adapters # Y05042 for this size Lock N Load Platform (55x49) # Y05044-39. This should get you about 5 inches of clearance from your panoramic roof to the bottom of the platform. This is what I recommend and will be great for hauling your lumber and gear. Just make sure you do not exceed your jeep's roof weight capacity. If for some...
  view full answer...
  
• Can the LockNLoad SL Adapter Be Used on Yakima BaseLine Towers
  Unfortunately no, the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042 will not work with the Yakima Baseline towers. To get a Yakima LockNLoad platform on your Baseline Towers for your 2016 Chevrolet Silverado you would need to first install crossbars. - Yakima JetStream Crossbars # Y00426 You could then use one of the Yakima LockNLoad platform racks for crossbars which will attach to crossbars instead of directly to the towers. - Yakima LockNLoad Platform Rack...
  view full answer...
• Roof Basket That Mounts to Factory Raised Side Raids of 2019 Jeep Renegade
  There is one! It is called the Surco Safari Rack 5.0 for Raised Factory Rails # SPS5060-1101. It's size 60" x 50" which is the size Surco recommended for your 2019 Jeep Renegade. This system is a complete basket with sides and comes with adapters that clamp straight to your factory roof rails. I attached a video below with our review and explanation of the basket. It is similar to the very popular Yakima LockNLoad Platform Rack # Y05045. The LockNLoad platform though still needs separate...
  view full answer...
• Parts Need To Install Yakima LockNLoad Platform on a 2021 Nissan NV3500
  With the Yakima RoundBar Crossbars # Y00410 attached to the SkyLine Towers # Y53TR you will need to remove the RoundBar SL Adapter # Y03536 and install the LockNLoad SL Adapter # Y05042. You will need 2 sets of the adapters as they are sold per for one set of towers as you could have 4 or 6 mounting points. You will use the same Landing Pads # Y00221 on the towers as they do not need changed. Yakima has verified this setup will fit with their Yakima LockNLoad Platform Roof Tray # Y42AV...
  view full answer...
• Parts Needed to Install Roof Rack on 1999 VW Euro Van
  I may have a solution for you, but I'm not showing any roof racks that are going to connect directly to any fixed mounting points or via rain gutters. You could go one of two directions with this that would allow you to mount a roof platform like the Yakima LockNLoad Platform Roof Tray # Y05044 on your 1999 VW Eurovan. You could use something like the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long - Black # 298-SX6000B, which are the easiest to install option since they...
  view full answer...
• Platform Roof Rack that Fits 2022 Ford Bronco with Raised Rails
  While Rhino Rack doesn't have a Pioneer Platform Yakima has a very similar option with their LocknLoad Platform that is a fit for your 2022 Ford Bronco. For that you'd need the Timberline feet part # Y00147, LockNLoad platform # Y05045, and SL adapter # Y05042 (quantity 2). This will give you a 60 inch by 54 inch platform that is very similar to the Pioneer Platform.
  view full answer...