Yakima LockNLoad Platform Rack for Raised Rails - TimberLine Towers - Aluminum

See what our Experts say about this Yakima Roof Rack

• Can I Use Yakima SlimShady Awning With Yakima LocknLoad Platform?
  Yes! It will work on the Yakima LocknLoad Platform # Y42AV that's on the factory crossbars on your 2021 GMC Yukon. The Yakima SlimShady # Y96VR will attach to the side rails of your platform. Note that the awnings come in different sizes, so make sure to get the length that matches your platform and your needs. # Y56VR - 30 sq ft # Y36VR - 42 sq ft # Y96VR - 64 sq ft
  view full answer...
• Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"
  You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
  view full answer...
• Parts Need To Install Yakima LockNLoad Platform on a 2021 Nissan NV3500
  With the Yakima RoundBar Crossbars # Y00410 attached to the SkyLine Towers # Y53TR you will need to remove the RoundBar SL Adapter # Y03536 and install the LockNLoad SL Adapter # Y05042. You will need 2 sets of the adapters as they are sold per for one set of towers as you could have 4 or 6 mounting points. You will use the same Landing Pads # Y00221 on the towers as they do not need changed. Yakima has verified this setup will fit with their Yakima LockNLoad Platform Roof Tray # Y42AV...
  view full answer...
• What Length/Type Of Crossbar For Mounting Two Hullavators On 2025 Subaru Outback Wilderness?
  Hey Carol, I can definitely help with that! You will need to go with an extra long crossbar to accommodate two of the Thule Hullavators # TH898 on your 2025 Subaru Outback Wilderness, but it can be done. The best roof rack for this will be a Yakima JetStream rack since the design of their crossbars allows longer bars to work. Each Hullavator requires 28-1/2" of bar space so a 60" crossbar will do great. Here are the parts you need: - TimberLine Towers for Yakima Crossbars - Raised, Factory...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform Rack
  The Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
  view full answer...
• Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side Rails
  For your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
  view full answer...
  
• What Does The Yakima TimberLine Roof Rack for Raised Rails Y39YD Come With?
  Hello Alexander, thanks for reaching out. The Yakima TimberLine Roof Rack for Raised Rails part # Y39YD is a full roof rack system, and this is the correct fit for the 2025 Kia Sorento. It comes with four TimberLine Towers and two 50" JetStream crossbars. If you want to do a larger crossbar, it is possible, we just wouldn't offer it as a kit. The next size up for the Yakima Aero bars is a 60". So all you would need is the four pack of TimberLine Towers part # Y33TR, and a set of 60" crossbars...
  view full answer...
• Recommended Roof Rack for Using Two Hullavators on a 2024 Ford Bronco Hard Top
  Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item # TH898 on a 2024 Bronco. To mount and use two Hullavator item # TH898 on a 2024 Ford Bronco 4 door hard top with factory raised roof rails you will need the following parts: TimberLine Towers for Yakima Crossbars item # Y33TR 70" Long - Yakima JetStream Crossbars - Aluminum - Black item # Y00427 The 70" bars are the next size up...
  view full answer...
• Can Two Thule Hullavators Be Installed On The Roof Of A 2026 Subaru Outback Wilderness?
  Hi Robert! Sweet kayaks! Using two of the Thule Hullavators # TH898 on the roof of your 2026 Subaru Outback Wilderness is looking like it may be a no-go. With them being 36" wide, you would need to have at least 68" of useable crossbar length. You could technically get this with the Yakima CoreBar Crossbars - Steel - Black - 70" Long - Qty 2 # Y00423 and the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR, but you would have a lot of overhang. With the Hullavator,...
  view full answer...
• Option For Using 80" Yakima CoreBars On 2015 Toyota Sienna
  Good morning, and thanks for reaching out. Yes, we do have an option for using the 80" Yakima CoreBars on a 2015 Toyota Sienna with the factory raised rails. First, I would like to note that the 80" crossbars are super long for a Sienna. Yakima recommends a 50" CoreBar for the 2015 Sienna. We have a 2013 Sienna XLE with 41" OEM crossbars that are flush with the raised rails on the roof. The 80" bars are almost twice that length, so they are going to stick out like 20" past the raised...
  view full answer...
• What Comes with the Annex for 2 Person Yakima SkyRise Tents # Y07421
  The Annex for 2 Person Yakima SkyRise Tents # Y07421 is just the enclosure that you see pictured beneath the Yakima SkyRise tent in the attached review video. This is a fit for the (discontinued) SkyRise Y07407 (Red) or SkyRise HD # Y07436 (Tan and Red). The SkyRise tents are compatible with your Crosstrek but you will need to use a different roof rack if the one you currently are using is the OEM roof rack according to Yakima. Roof rack systems where the crossbars end inside the legs...
  view full answer...
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Recommended Thule Aeroblade Roof Rack Recommendation for 2018 Toyota Tacoma
  47 inch long Thule aero bars would be too short to be used on your 2018 Toyota Tacoma. Thule recommends a 53 inch bar like the part # TH711400 with the feet part # TH710501 and the fit kit # TH145107.
  view full answer...
• Yakima Round Bar Roof Rack Components to Install Round Bars 2015 Toyota Sienna
  Hey Jim, the best alternative to the mounting hardware you have now would be the current Yakima roof rack components that they list for installing the round bars on your 2015 Toyota Sienna which is their Timberline kit that consists of part numbers # Y33TR and # Y03536. How do you like the longer crossbars?
  view full answer...
• Longest Possible Crossbars That Can Be Installed On A 2013 Chevy Tahoe
  Hi Todd! I am pretty sure you mean you are wanting the widest crossbar set up possible, right? If that's the case, I have the longest possible option listed below: TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 # Y33TR Yakima CoreBar Crossbar - Steel - Black - 80" Long - Qty 1 # 8880656 The Yakima comes with 80" wide crossbars and will be the longest possible option. Your Tahoe is 79" wide without the mirrors, so you will be legal in every state. As long...
  view full answer...
• Are the Yakima JetStream Crossbars on a 2019 Subaru Ascent Compatible w/ Yakima & Thule Attatchments
  The TimberLine Towers # Y33TR and Yakima JetStream Crossbars # Y00426 are confirmed to fit your 2019 Subaru Ascent and are going to be a great option to use both your Thule Portage Canoe attachment and Yakima Keel Over Canoe attachment. You will be able to use the Thule Portage and the Yakima Keel Over with the JetStream crossbars without issue. You can also add the Yakima Same Key System (SKS) Lock Cores # Y07204. This will allow you to lock your roof rack to your roof.
  view full answer...
• Can I Use the Thule Hullavator # TH898 with the Yakima JetStream Crossbars and Lock Cores?
  I just went ahead and looked up your orders and confirmed that you recently ordered the Yakima Same Key System (SKS) Lock Cores (QTY 4) # Y07204, the Yakima TimberLine Towers # Y33TR, and the 50" JetStream Crossbars # Y00425. The lock cores that you purchased install into the TimberLine towers and not into the end caps of the JetStream crossbars themselves. With that being said, the Thule Hullavator # Y00425 is compatible with the JetStream crossbars. It is important to note, though,...
  view full answer...
  
• Roof Rack for 2024 Subaru Forester Wilderness With Roof Top Tent
  I'm assuming you're wanting a roof rack to hold your tent since you looked at the Malone AirFlow2 # MAL74AR. I would double check the requirements of your roof tent to be sure, but this roof rack should be able to handle it. For example, a tent like the Yakima SkyRise # Y07436 requires a roof and roof rack with a minimum capacity of 165 lbs. The Malone rack would meet those requirements. If you only plan to use the roof rack when you use the tent the Malone is a good option. If you want...
  view full answer...
• How to Carry Two Canoes on Roof of 2019 Honda Passport with Factory Crossbars
  Your best option is to use the Thule Compass Watersport Carrier # TH890000. The Compass is compatible with round, square, aero, elliptical, and most factory crossbars, including the ones on your 2019 Honda Passport. It can easily accommodate your two canoes, as long as their combined weight is not over 130 lbs, and they are not more than 36 inches wide (at their widest point). The Compass will allow you to carry your two canoes in a vertical (post-style) position so you have one on each...
  view full answer...
  
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Replacement long T-Bolt Kit for the Yakima Timberline Towers
  Brandon, it looks like the long Allen bolt you're looking for for the TimberLine Towers for Yakima Crossbars # Y33TR is only offered as part of the Replacement Rubber Strap Kit for Yakima TimberLine Towers # 8880820.
  view full answer...
• Recommended Roof Rack for 2024 Toyota Sienna
  For an extremely quiet roof rack that fits your 2024 Toyota Sienna I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 -TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR The JetStream bars use an asymmetrical design along with WindRidges to reduce drag, noise, and wind vibration. This means they will definitely be quiet compared to the factory crossbars. You can also add...
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• What Crossbar System Do You Recommend For a Rooftop Tent on My 2021 Subaru Forester?
  For a crossbar system that will be able to accommodate a roof top tent on your 2021 Subaru Forester, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR - (optional for theft-deterrence) Yakima Same-Key Lock Cores # Y07204 With this Yakima crossbar systems, you will be able to accommodate a rooftop tent up to a maximum static weight capacity of 600 pounds. If the...
  view full answer...
• Recommendation on a 1 or 2 Kayak Carrier for a 2010 Subaru Forester
  If you looking for a kayak carrier that will work with factory, Aero, round, or square crossbar roof racks, then I recommend the Thule Stacker # TH830. The Stacker carrier can carry 1-2 kayaks at a time. The Stacker includes hardware and tie-down straps to help secure your kayaks to your roof rake and vehicle. It carrier can be mounted on a vehicle with a minimum crossbar spread of 24 inches. I you are looking for a carrier that will carry up to 2 kayaks and can be loaded easier form the...
  view full answer...
• Recommended Roof Rack For A 2014 Subaru Outback Hauling Two 31" Wide Kayaks
  Hey Erik, With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components: TimberLine Towers for Yakima Crossbars # Y33TR HD Bar SL Adapter # Y03541 Yakima HD Crossbars - 68" Long # Y01158 I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Parts Needed To Mount A Yakima LockNLoad Platform On A 2024 Subaru Forester Wilderness
  Hey Jeff, There's going to be two ways to attach a Yakima LockNLoad Platform to the roof of your Forester. If mounting to crossbars you can use crossbar clamps # Y05039 (qty 2). If you decide you don't want to use the crossbars and instead use just the rails that run front-to-back then you would need TimberLine Towers # Y33TR (qty 4) and SL adapters # Y05042 (qty 2). Yakima recommends the 60" Long x 54" Wide # Y05045 for your Forester. This would require two sets of crossbar clamps...
  view full answer...
• Options For Putting A Yakima Lock N Load Platform On My 2021 Jeep Grand Cherokee Trailhawk
  The lowest profile option for your 2021 Jeep Grand Cherokee Trailhawk would be to get the Landing Pad 18 # Y00244 for the Skyline Towers # Y53TR and use the SL adapters # Y05042 for this size Lock N Load Platform (55x49) # Y05044-39. This should get you about 5 inches of clearance from your panoramic roof to the bottom of the platform. This is what I recommend and will be great for hauling your lumber and gear. Just make sure you do not exceed your jeep's roof weight capacity. If for some...
  view full answer...
  
• Can the LockNLoad SL Adapter Be Used on Yakima BaseLine Towers
  Unfortunately no, the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042 will not work with the Yakima Baseline towers. To get a Yakima LockNLoad platform on your Baseline Towers for your 2016 Chevrolet Silverado you would need to first install crossbars. - Yakima JetStream Crossbars # Y00426 You could then use one of the Yakima LockNLoad platform racks for crossbars which will attach to crossbars instead of directly to the towers. - Yakima LockNLoad Platform Rack...
  view full answer...
• Roof Basket That Mounts to Factory Raised Side Raids of 2019 Jeep Renegade
  There is one! It is called the Surco Safari Rack 5.0 for Raised Factory Rails # SPS5060-1101. It's size 60" x 50" which is the size Surco recommended for your 2019 Jeep Renegade. This system is a complete basket with sides and comes with adapters that clamp straight to your factory roof rails. I attached a video below with our review and explanation of the basket. It is similar to the very popular Yakima LockNLoad Platform Rack # Y05045. The LockNLoad platform though still needs separate...
  view full answer...
• Parts Need To Install Yakima LockNLoad Platform on a 2021 Nissan NV3500
  With the Yakima RoundBar Crossbars # Y00410 attached to the SkyLine Towers # Y53TR you will need to remove the RoundBar SL Adapter # Y03536 and install the LockNLoad SL Adapter # Y05042. You will need 2 sets of the adapters as they are sold per for one set of towers as you could have 4 or 6 mounting points. You will use the same Landing Pads # Y00221 on the towers as they do not need changed. Yakima has verified this setup will fit with their Yakima LockNLoad Platform Roof Tray # Y42AV...
  view full answer...
• Parts Needed to Install Roof Rack on 1999 VW Euro Van
  I may have a solution for you, but I'm not showing any roof racks that are going to connect directly to any fixed mounting points or via rain gutters. You could go one of two directions with this that would allow you to mount a roof platform like the Yakima LockNLoad Platform Roof Tray # Y05044 on your 1999 VW Eurovan. You could use something like the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long - Black # 298-SX6000B, which are the easiest to install option since they...
  view full answer...
• Platform Roof Rack that Fits 2022 Ford Bronco with Raised Rails
  While Rhino Rack doesn't have a Pioneer Platform Yakima has a very similar option with their LocknLoad Platform that is a fit for your 2022 Ford Bronco. For that you'd need the Timberline feet part # Y00147, LockNLoad platform # Y05045, and SL adapter # Y05042 (quantity 2). This will give you a 60 inch by 54 inch platform that is very similar to the Pioneer Platform.
  view full answer...

Do you have a question about this Roof Rack?