See what our Experts say about this Yakima Roof Rack

• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• How Can I Mount a Pioneer Platform to My RetraxPRO Hard Cover on My 2022 Ram 1500?
  I have an answer for you. Without knowing the exact bed size or whether you have RamBox installed on your 2022 Ram 1500, if you are looking to use a Retrax Pro model with the included rails like the RetraxPRO Hard Tonneau Cover # RTT-80245, I cannot guarantee that the Landing Pad 26 # Y75ZR fit into the dimensions of the tracks of the Retrax tonneau cover. Yakima unfortunately does not test their landing pads on other manufacturers' tracks, so there is no way to tell if the LockNLoad platform...
  view full answer...
• How To Attach the Yakima LockNLoad To a Yakima OverHaul HD On a Toyota Tacoma
  Yes, the Crossbar Clamps for Yakima LockNLoad Roof Rack part # Y05039 is what you need to install the Yakima LockNLoad Platform Roof Rack part # Y05044 on the Yakima OverHaul HD Truck Bed Ladder Rack part # Y01151-5868 which is a confirmed fit for your 2018 Toyota Tacoma. That said, you will need to order two sets of the clamps. The Yakima OverHaul HD Truck Bed Ladder Rack when paired with the Yakima LockNLoad Platform Roof Rack is by far the best option to carry a tent on your Tacoma...
  view full answer...
• What is Needed to Add Yakima LockNLoad to 2021 Subaru Outback With Side Rails
  Hey Jeremy, I believe you're asking what you need to mount the Yakima LockNLoad Platform Roof Tray # Y05044 directly to the side rails on your 2021 Subaru Outback, and if so, I verified directly with Yakima the exact parts you'll need: - SkyLine Towers # Y53TR - Landing Pad 27 # Y46VR - LockNLoad SL Adapters # Y05042-2 And that's it! These parts are all need to mount the LockNLoad directly to your Outback.
  view full answer...
• Will Yakima LockNLoad FIt 2010 Toyota RAV4 Factory Roof Rack
  Hey Austin, Yep, you can mount the Yakima LockNLoad Platform Roof Tray # Y05044 to the factory roof rack of your 2010 Toyota RAV4. You'd just need to get two sets of the Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 so you can attach the platform to your RAV4 and you'd be set.
  view full answer...
• Can Yakima DeepSpace 10 Rooftop Cargo Box Be Installed on Yakima LockNLoad Platform Tray
  The Yakima DeepSpace 10 Rooftop Cargo Box # Y65RR can be mounted to the Yakima LockNLoad Platform Roof Tray, like part # Y05044, but you'll be using the clamps for the installation since the DeepSpace 10 currently (July 2023) doesn't have any T-Slot hardware. I confirmed with Yakima that this will work though so you'll be good to go with this combination!
  view full answer...
• Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform K
  You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
  view full answer...
  
• What Tie Downs Can I Use With The Yakima LockNLoad # Y05044
  The Ladder Pegs for Rhino-Rack Heavy-Duty Crossbars - 3" Tall # RSLP will not fit in the tracks of the Yakima LockNLoad Platform Roof Tray # Y05044, but I have something similar that you can use with the LockNLoad. The Ladder Pegs are made to fit in the rhino rack heavy duty crossbars # RB1375B-2. You can use the Yakima Eye Bolts # Y01162 with the lock in load on your 2019 Jeep Grand Cherokee.
  view full answer...
• What is Height of LockNLoad Platform Rack for LEER Camper Topper on a 2020 Nissan Frontier
  To install the LockNLoad on your 2020 Nissan Frontier 5' Bed LEER camper topper you need the following parts: - 55" Long x 49" Wide Yakima LockNLoad Platform Roof Tray # Y05044 - TrackTowers # Y52AV - LockNLoad SL Adapter # Y05042-2 The TrackTowers sit about 2" tall and the LockNLoad is around 4" tall so you'll be adding about 6" to the height of your LEER topper which is pretty standard for a track mount platform. You'll be pretty hard-pressed to find something only sitting 3-1/2"...
  view full answer...
• Yakima LockNLoad Fit For 2022 Chevy Suburban With Factory Roof Rack
  Hello Dave, Your 2022 Chevy Suburban with factory crossbars can mount the LockNLoad, but there are no cargo boxes compatible with it, including a Roam Adventure or any other box. If you did want to use the LockNLoad for other purposes, I verified with Yakima the correct LockNLoad size as well as clamps needed to fit your '22 Suburban: - Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide # Y05044 - Two Sets Of: Crossbar Clamps for Yakima LockNLoad # Y05039 Otherwise,...
  view full answer...
• How Many Crossbar Clamps Are Needed for Yakima LockNLoad Platform Rack
  In order to install the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide # Y05044 you will need two sets of the Crossbar Clamps for Yakima LockNLoad Platform Rack - Qty 2 # Y05039. So that will be 4 clamps total. Instead of buying them separately you can get the Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 55" Long x 49" Wide # Y05044-39 which comes with everything you need.
  view full answer...
• How To Attach Yakima LockNLoad Platform Roof Tray To Factory Crossbars of 2020 Honda Passport
  The Yakima LockNLoad Platform Roof Tray part # Y05044 will fit to your factory cross bars with 2 sets of the Crossbar Clamps for Yakima LockNLoad Platform part # Y05039. This will be as low profile as possible with the factory cross bars, the clamps are 1" tall and the platform itself is about 4" tall.
  view full answer...
  
• Crossbar Spacing For A Yakima LockNLoad Platform Rack On A 2018 Lexus GX 460
  The Yakima LockNLoad Platform Roof Tray # Y05044 (K) you're looking at requires that the spacing from the center of the front crossbar to the center of the rear crossbar needs to be 27" to 33" apart. The platform rack will most likely overlap with the sunroof.
  view full answer...
• How to Add Platform Rack to 2020 Toyota Highlander With Naked Roof
  While you can add a platform rack to your 2020 Toyota Highlander, I checked with our manufacturers and there isn't a direct-mount option for your vehicle. So the only option for your Highlander, assuming it does have a naked roof without flush rails, is to add a roof rack which you can then add the platform rack to. There is one option for this from Yakima, and I verified with them the correct parts for the rack, as well as the correct size of platform needed. The exact parts that will...
  view full answer...
• Fitting Yakima LockNLoad Platform Roof Tray to Round Crossbars
  The Yakima LockNLoad can fit round crossbars but you will need to use the Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039. RoundBar SL Adapters won't allow you to mount the platform to the rack, as they are designed to mount crossbars to certain Yakima roof rack towers. The Crossbar Clamps # Y05039 will fit LockNLoad trays like the Yakima LockNLoad Platform Roof Trays, which come in different sizes such as the 55" Long x 49" Wide # Y05044 and 84" Long x 62" Wide # Y05049.
  view full answer...
• Height of Yakima LockNLoad Above Crossbar Clamps and Cargo Basket Fit
  The Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 are a total of 1 inch in height, but when they are clamped around your crossbars, the LockNLoad is almost directly on the crossbars, as it attaches right to the top of the clamp. These clamps will work with the Yakima LockNLoad Platform Roof Trays like the 55" Long x 49" Wide # Y05044 or 84" Long x 54" Wide # Y05048. As for the mounts, those will not work for a LockNLoad, and while you can't mount a rooftop cargo box to...
  view full answer...
• Is There A Yakima LockNLoad Platform For My 2018 Subaru Forester XT?
  Looking at the available platform style racks for your Forester, we've found that the best fit for your 2018 Subaru Forester is going to be the 60 inch long by 49 inches wide Rhino-Rack Pioneer SX Platform Rack # JA9133. There is no Lock N Load # Y05044 that we have confirmed to fit on your Subaru. This is the same exact thing just a different brand. This rack comes with the SX feet that will connect to your factory raised rails. You do not have to buy the Timberline Lockable Brackets for...
  view full answer...
• Smallest Yakima Lock N Load Platform For 2018 Ford Expedition
  The smallest size Lock N Load Platform made is 55 inches long by 49 inches wide # Y05044. You can use the same adapters and towers for this to fit on your 2018 Ford Expedition. This is the closest size to your panel you have.
  view full answer...
• Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side Rails
  In order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
  view full answer...
• Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?
  I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
  view full answer...
• Parts Needed to Install Yakima LockNLoad on 2018 Subaru Outback Limited for Rhino Rack Batwing
  The easiest solution would be to order the part # Y05044-39 as this is a kit that includes both the # Y05044 and the # Y05039. The Rhino Rack Batwing part # RR33400 would easily fit to this as well since it can attach to the channels that are present on top of the LockNLoad.
  view full answer...
• Will Small Thule Caproc k Platform Tray Fit 2024 Subaru Forester with Raised Rails
  According to my research you'll be able to install the Small version of the Thule Caprock on your 2024 Subaru Forester. The parts you'll need to accomplish this are the following: - Thule Caprock Platform Roof Tray 59" Long x 52-3/8" Wide # TH58YE - Evo Raised Rail Feet # TH710401 - Lock Core Kit # TH450400 (optional) Yakima lists their 55" Long x 49" Wide LockNLoad Platform Roof Tray # Y05044 fitting your vehicle with their specific leg kit and they have photo evidence of this platform...
  view full answer...
• Can I Use The Yakima LockNLoad Platform Tray If My Facrory Crossbars Don't Adjust On My 2020 Rav4?
  The Yakima LockNLoad Platform Roof Tray # Y05044 is a pretty versatile tray as it gives you multiple points to mount it to the crossbars on your 2019 Toyota Rav4. All you need is two sets of the Crossbar Clamps # Y05039 and then once you put the tray on your roof rack, position it over your factory bars and use the clamps to secure it down! No need to have adjustable crossbars, the tray will have many different spots to connect the clamps! I've included a video of the LockNLoad so you...
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Roof Rack Option For A 2016 Lexus GX460 With Factory Flush Rails
  Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
  view full answer...
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Roof Rack System for 2026 Chrysler Pacifica
  Hey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
  view full answer...
• Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
  Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
  I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER Cap
  Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
  view full answer...
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
  The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
  view full answer...
• Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
  Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
  view full answer...
• Can I Use the Same Yakima Landing Pad on my 2025 Subaru Outback That I Used on My 2019
  That's a great question, Maryann! No, you can't use your existing Yakima Landing Pad 15 # Y00241 on your 2025 Subaru Outback Wagon. Instead, you would need to get the Yakima Landing Pad 27 # Y46VR. You will still be able to use your SkyLine Towers # Y53TR and just swap them out for the Landing Pad 27. Congrats on the new Subaru! What are you usually carrying on the roof?
  view full answer...
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side Rails
  For your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
  view full answer...
  
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform Rack
  The Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
  view full answer...
• What is Needed to Add Yakima LockNLoad to 2021 Subaru Outback With Side Rails
  Hey Jeremy, I believe you're asking what you need to mount the Yakima LockNLoad Platform Roof Tray # Y05044 directly to the side rails on your 2021 Subaru Outback, and if so, I verified directly with Yakima the exact parts you'll need: - SkyLine Towers # Y53TR - Landing Pad 27 # Y46VR - LockNLoad SL Adapters # Y05042-2 And that's it! These parts are all need to mount the LockNLoad directly to your Outback.
  view full answer...
• Parts Needed to Add Yakima LockNLoad Platform on a 2021 Nissan NV 3500
  Hey Garrett, thanks for reaching out! I'm pretty sure at the time that Bob wrote that answer Yakima had only come out with their crossbar clamps for the LockNLoad and they were geared up to get all of the direct fits in their system but we were still waiting on that. Nevertheless, there is a way to install the LockNLoad directly to your 2021 Nissan NV 3500 and you had almost all of the pieces laid out in your comment (might as well give you the title "Expert" as well!). The only parts...
  view full answer...
• Can 2023 Subaru Outback Wilderness Use Yakima LockNLoad Platform Without Crossbars
  Hi David, Yep, you can use the LockNLoad on your 2023 Subaru Outback Wilderness without having to use crossbars. I checked directly with Yakima for you to verify this, though you will need the larger 60" x 54" platform to fit the width of your Outback. Here is exactly what you'll need: - Yakima LockNLoad Platform Roof Tray - 60" Long x 54" Wide # Y05045 - TimberLine Towers # Y33TR - LockNLoad SL Adapter - Qty 4 # Y05042-2
  view full answer...
• What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?
  For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
  view full answer...
• Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform K
  You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
  view full answer...
  
• How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof Rack
  You will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
  view full answer...
• What is Height of LockNLoad Platform Rack for LEER Camper Topper on a 2020 Nissan Frontier
  To install the LockNLoad on your 2020 Nissan Frontier 5' Bed LEER camper topper you need the following parts: - 55" Long x 49" Wide Yakima LockNLoad Platform Roof Tray # Y05044 - TrackTowers # Y52AV - LockNLoad SL Adapter # Y05042-2 The TrackTowers sit about 2" tall and the LockNLoad is around 4" tall so you'll be adding about 6" to the height of your LEER topper which is pretty standard for a track mount platform. You'll be pretty hard-pressed to find something only sitting 3-1/2"...
  view full answer...
• Recommended Platform Rack for a 2021 Subaru Ascent
  I did a little digging around and it looks like the roof on your 2021 Suabru Ascent is around 63 inches, making the Yakima LockNLoad Platform Roof Tray # Y05045 with the TimberLine Towers for Yakima Crossbars # Y33TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 near perfect. This platform rack measures 60" long, 54" wide, and will be a perfect addition to your Subaru for all your camping and luggage needs. This rack also has top channels so you can...
  view full answer...
• Can Yakima LockNLoad be Installed on 2021 Toyota 4Runner OEM Roof Rack
  Great question! The OEM roof rack on your 2021 Toyota 4Runner looks nice but it sits too low to your roof for the Yakima LockNLoad # Y05045-39 mounting hardware to fit. Instead of purchasing a roof rack AND the LockNLoad what I recommend doing is picking up the parts to mount the LockNLoad directly to the raised rails on your 4Runner: 60" Long x 54" Wide LockNLoad # Y05045 SL Adapter # Y05042-2 TimberLine Towers # Y33TR We don't have any brackets designed to fit with the ARB awnings...
  view full answer...
• Rhino-Rack Pioneer Platform Rack for 2019 Ford Expedition with Factory Rails and No Crossbars
  I actually had the chance to work with a 2019 Ford Expedition. While in the shop, I tested the RhinoRack roof racks we had shown to be compatible with the factory installed rails and to my surprise, the SX Series Legs # RRSX100 were not a fit. When trying to install them, I could tell they were not tall enough to catch on the rather large and triangular shape of the Expedition rails. The only style of legs or towers that will work is the kind that wraps around the entire bar, like the...
  view full answer...
  
• Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof Tent
  The Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
  view full answer...
• Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"
  You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
  view full answer...
• Recommended Platform Rack System without Crossbars for 2019 Toyota Highlander XLE
  For a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts # Y05045, # Y53TR, # Y05042-2, # Y00242. This kit combines the Yakima Lock N Load Platform # Y05045 and Yakima Skyline towers # Y53TR to give you the platform without a crossbar for the low profile setup you're looking for. The additional parts are for the footpack and adapters to allow you to mount the towers to your 2019...
  view full answer...
• Larger Roof Platform Tray that Fits 2023 Honda Pilot
  We have a larger platform tray that fits the roof of your 2023 Honda Pilot with flush side rails with the Yakima LockNLoad part # Y05045, # Y53TR, # Y05042-2, # Y00245 which will give you a platform that is 60 inch by 54 inch. There isn't a Rhino Rack option at this time that fits.
  view full answer...
• Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side Rails
  In order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
  view full answer...
• Can Yakima LockNLoad Platform for 2011 Jeep Patriot Support Yakima SkyRise Tent
  The Yakima LockNLoad Platform Roof Tray part numbers # Y05045, # Y33TR, and # Y05042-2 that fits your 2011 Jeep Patriot can be used with roof top tents like the Yakima SkyRise Tent part # Y79XR that you mentioned without requiring any additional support.
  view full answer...
• Carrying A Yakima LockNLoad Platform On 2007 Chevy Suburban
  The Yakima LockNLoad Platform Roof Tray - Aluminum - 84" Long x 54" Wide, part # Y05048, needs a roof rack in order to attach to your 2007 Chevy Suburban. Your vehicle's roof either has raised rails or fixed points, so it has two separate roof rack fits. Each option has a maximum weight limit of 165lbs. Please keep this in mind because the weight of the rack and the accessories are part of the maximum weight limit and the LockNLoad Platform weighs 70lbs and the roof rack will weigh approximately...
  view full answer...
• Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?
  I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
  view full answer...
• Roof Platform Tray that Fits 2015 Chevy Tahoe
  I have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
  view full answer...
• Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point Roof
  The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
  view full answer...
• Yakima Roof Rack Parts for 2018 Subaru WRX
  Yes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
  view full answer...
• Does Yakima Roof Rack For Fixed Mounting Points Fit 2015 Mazda CX-5
  The Yakima roof rack for fixed mounting points will fit your 2015 Mazda CX-5, yes. Your CX-5 (and all others) do have those fixed mounting points under the ditch molding trim you referred to, so it will work, with the correct part numbers being the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 11 # Y00233 - (Optional) Yakima Same Key System (SKS) Lock Cores # Y07204 As for the crossbars, they are made of anodized aluminum...
  view full answer...
• Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16
  For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
  view full answer...
• Longest Roof Rack Bars That Fit a 2015 Subaru Impreza Hatchback
  Since you are wanting to use crossbars that may be longer than what is recommended from the manufacturer I would go with a Yakima system. Their JetStream Crossbars have a track system on the bottom that allow them to be more versatile than many other roof racks from competitors. If your 2015 Subaru Impreza Hatchback has a naked roof then you need the SkyLine Towers # Y53TR and Landing Pad 11 # Y00233. For raised rails you simply need the TimberLine Towers # Y00147. In addition to the...
  view full answer...
• Roof Rack Similar to Whispbar Recommendation for 2014 Tesla Model S with Sunroof
  I have a solution that will work well for you but Whispbar was actually bought out by Yakima. So to get the most similar roof rack to a Whispbar for your 2014 Tesla Model S with a sunroof, you'd want the Yakima JetStream roof rack part numbers # Y00426, # Y53TR, and # Y00233. With this you'd have a very high quality roof rack like you are wanting, that has aero shaped bars which will allow you to have minimal wind noise.
  view full answer...
• Recommended Roof Rack For a 2013 Ford Transit Connect
  I recommend the Yakima HD roof rack for your 2013 Ford Transit Connect. This will consist of the Crossbars # Y01156, Towers # Y53TR, Adapters # Y03541 and Fit Kit # Y00233. I prefer this option as the bars have a versatile design to accept either track or clamp on accessories plus the endcap has an integrated tie-down point to help secure your cargo.
  view full answer...
• Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side Rails
  For your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
  view full answer...
• 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier Recommendation
  For a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
  view full answer...
  
• Method to Reduce Wind Noise from Roof Rack on 2014 Mazda 3
  Roof rack crossbars do generate noise and some make more noise than others. Round and square bar roof racks tend to be the noisiest and elliptical and aerodynamic bars tend to make less noise. No roof rack will be particularly quiet when you have your sunroof open. That is just the nature of the beast. You can sometimes reduce the noise level of a roof rack by adding a fairing to the front bar, such as Inno's # INA262. These usually help the noisier round and square bar roof racks like...
  view full answer...
• What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof Rack
  For your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
  view full answer...
• Roof Rack for 2012 Ford Transit Connect with Longer Crossbars
  The longest crossbar roof rack we have for your 2012 Ford Transit Connect is the Yakima Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which comes with a similar square HD crossbar to the Rhino Rack you mentioned. This rack will give you 55 inch crossbars.
  view full answer...
• Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting Points
  For the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
  view full answer...
• Bike Carrying Recommendations for 2012 Mazda 3 Hatchback
  The Yakima Roof Rack which uses the LandingPad 11 (consisting of parts # Y00408, # Y00124 and # Y00233) is designed so that the crossbar and feet are quickly and easily removable, but the LandingPad would remain on the roof. The remainder of the offerings would connect directly to the fixed mounting points on the vehicle roof. It's possible to remove this type of rack when it's not being used, but it's a bit of an undertaking. Given your concern regarding leaving the LandingPad in place,...
  view full answer...
• Which Roof Rack and Multi-Kayak Carrier can be Used With a 2012 Mazda 3 Hatchback?
  We can get you set up to transport a pair of 10-foot kayaks on your 2012 Mazda 3 hatchback. For a roof rack, I recommend going with the Yakima; it has aero crossbars, # Y00425, which are used in conjunction with the Landing Pad # Y00233 and Skyline Towers # Y53TR that install onto fixed mounting points on your Mazda's roof. To transport your 10-foot kayaks on the Rhino Rack, you can use the Thule The Stacker # TH830. It mounts directly onto the crossbars and utilizes a combination of...
  view full answer...
• Roof Rack Options for Adding a Yakima SkyRise Tent on a 2011 Subaru Forester
  To determine if the factory crossbars on your 2011 Subaru Forester are compatible with a rooftop tent you will first need to see if there are any specifications for the tent. For example, the Yakima SkyRise, part # Y07436 for 2 people, requires that your roof rack be supported and no higher than 98" off of the ground. Both the roof of your vehicle and the roof rack need to have a minimum load capacity of 165 lbs as well. I have attached a photo that you can use as a guideline for your...
  view full answer...
  
• Can a Pelican Trailblazer 100NXT Kayak Use a Malone J-Style Kayak Carrier on a 2012 Subaru Forester
  From what I could find on your Pelican Trailblazer 100NXT kayak, you should have no problem transporting it on your 2012 Subaru Forester using a Malone J-Style Kayak carrier like the Malone FoldAway # MAL98FR. The Pelican Trailblazer 100NXT kayak has a pretty standard shaped hull and weighs 36 lbs., therefore the Malone FoldAway Kayak Carrier # MAL98FR will work to carry your kayak. The # MAL98FR has a weight capacity of 75 lbs. You will need crossbars on your Forester to use the Malone...
  view full answer...
• Roof Rack Recommendation for a 2009 Ford Flex with Vista Roof
  You will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
  view full answer...
• Recommended Fixed Point Roof Rack For 2015 Mazda CX-9 Naked Roof
  There are a couple options to fit the fixed mounting points of your 2015 Mazda CX-9. I recommend the Thule Rack consisting of: Thule WingBar Load Bars - Aluminum - Black - 53" - Qty 2 # TH711420 Thule Podium Foot Pack for Aero Bars # TH460R Thule Fit Kit for Podium Style Foot Pack, # THKIT3069 We also have the Yakima rack which also has a great reputation consisting of: Yakima JetStream Crossbars - Aluminum- 60" Long - Qty 2 # Y00426 SkyLine Towers for Yakima Crossbars - Fixed Mounting...
  view full answer...
• Will the Surco Safari Roof Baskets Work with Rola Roof Rack Crossbars
  I do have an option that will allow you to mount a Surco Safari Basket to the roof of your 2017 Ram ProMaster City but the crossbars of the Rola Haul-Your-Might Truck Bed Ladder Rack 59742 will not work with the mounting feet used on the ProMaster City Roof Rack by Rola 59633 because the crossbars on the ladder rack are too long for your vehicle. Since the crossbars are different lengths the mounting holes on the feet will not line up with the mounting holes on the crossbar. Also, the...
  view full answer...
• Yakima Roof Rack Components Needed For A 2015 Kia Soul
  Idk exactly how you got to that specific page but it's only including the Yakima JetStream crossbars # Y00425 and Landing Pads for Yakima SkyLine and Control Towers # Y00233 and does not include the towers needed. For a 2015 Kia Soul with a naked roof you would need the following components: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22...
  view full answer...
  
• Recommendation for Carrying 2 Kayaks on a 2017 Subaru Impreza
  We do have a hitch that will fit your 2017 Subaru Impreza, which is the Draw-Tite # DT24959. If you choose to tow a Kayak trailer, this hitch will work well. However, when I looked up the owner's manual for your Impreza it said that your vehicle was not made or intended for towing trailers. I have another solution that will not void your vehicle's warranty. Yakima has a roof rack system that will allow you to carry both Kayaks, as long as you do not go over your Subaru's roof weight capacity....
  view full answer...
• Correct Yakima Landing Pad to Fit 2020 Subaru Impreza
  The Landing Pad 11 # Y00233 will fit your 2020 Subaru Impreza as long as it's a Sedan (4-door) with no existing rails or crossbars on the roof. Please note that you will need 2 sets of the Landing Pad 11 to complete your roof rack. I really like the JetStream crossbars so for a complete roof rack you will need the following: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 SkyLine Towers - # Y53TR Landing Pad 11 - # Y00233 Key System - # Y07204 (optional) If you happen to...
  view full answer...
• Roof Rack Recommendation for 2016 Subaru WRX STi
  We do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
  view full answer...
• Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point Roof
  The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
  view full answer...
• Yakima Roof Rack Parts for 2018 Subaru WRX
  Yes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
  view full answer...
• Does Yakima Roof Rack For Fixed Mounting Points Fit 2015 Mazda CX-5
  The Yakima roof rack for fixed mounting points will fit your 2015 Mazda CX-5, yes. Your CX-5 (and all others) do have those fixed mounting points under the ditch molding trim you referred to, so it will work, with the correct part numbers being the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 11 # Y00233 - (Optional) Yakima Same Key System (SKS) Lock Cores # Y07204 As for the crossbars, they are made of anodized aluminum...
  view full answer...
• Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16
  For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
  view full answer...
• Longest Roof Rack Bars That Fit a 2015 Subaru Impreza Hatchback
  Since you are wanting to use crossbars that may be longer than what is recommended from the manufacturer I would go with a Yakima system. Their JetStream Crossbars have a track system on the bottom that allow them to be more versatile than many other roof racks from competitors. If your 2015 Subaru Impreza Hatchback has a naked roof then you need the SkyLine Towers # Y53TR and Landing Pad 11 # Y00233. For raised rails you simply need the TimberLine Towers # Y00147. In addition to the...
  view full answer...
• Roof Rack Similar to Whispbar Recommendation for 2014 Tesla Model S with Sunroof
  I have a solution that will work well for you but Whispbar was actually bought out by Yakima. So to get the most similar roof rack to a Whispbar for your 2014 Tesla Model S with a sunroof, you'd want the Yakima JetStream roof rack part numbers # Y00426, # Y53TR, and # Y00233. With this you'd have a very high quality roof rack like you are wanting, that has aero shaped bars which will allow you to have minimal wind noise.
  view full answer...
• Recommended Roof Rack For a 2013 Ford Transit Connect
  I recommend the Yakima HD roof rack for your 2013 Ford Transit Connect. This will consist of the Crossbars # Y01156, Towers # Y53TR, Adapters # Y03541 and Fit Kit # Y00233. I prefer this option as the bars have a versatile design to accept either track or clamp on accessories plus the endcap has an integrated tie-down point to help secure your cargo.
  view full answer...
• Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side Rails
  For your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
  view full answer...
• 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier Recommendation
  For a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
  view full answer...
  
• Method to Reduce Wind Noise from Roof Rack on 2014 Mazda 3
  Roof rack crossbars do generate noise and some make more noise than others. Round and square bar roof racks tend to be the noisiest and elliptical and aerodynamic bars tend to make less noise. No roof rack will be particularly quiet when you have your sunroof open. That is just the nature of the beast. You can sometimes reduce the noise level of a roof rack by adding a fairing to the front bar, such as Inno's # INA262. These usually help the noisier round and square bar roof racks like...
  view full answer...
• What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof Rack
  For your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
  view full answer...
• Roof Rack for 2012 Ford Transit Connect with Longer Crossbars
  The longest crossbar roof rack we have for your 2012 Ford Transit Connect is the Yakima Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which comes with a similar square HD crossbar to the Rhino Rack you mentioned. This rack will give you 55 inch crossbars.
  view full answer...
• Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting Points
  For the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
  view full answer...
• Bike Carrying Recommendations for 2012 Mazda 3 Hatchback
  The Yakima Roof Rack which uses the LandingPad 11 (consisting of parts # Y00408, # Y00124 and # Y00233) is designed so that the crossbar and feet are quickly and easily removable, but the LandingPad would remain on the roof. The remainder of the offerings would connect directly to the fixed mounting points on the vehicle roof. It's possible to remove this type of rack when it's not being used, but it's a bit of an undertaking. Given your concern regarding leaving the LandingPad in place,...
  view full answer...
• Which Roof Rack and Multi-Kayak Carrier can be Used With a 2012 Mazda 3 Hatchback?
  We can get you set up to transport a pair of 10-foot kayaks on your 2012 Mazda 3 hatchback. For a roof rack, I recommend going with the Yakima; it has aero crossbars, # Y00425, which are used in conjunction with the Landing Pad # Y00233 and Skyline Towers # Y53TR that install onto fixed mounting points on your Mazda's roof. To transport your 10-foot kayaks on the Rhino Rack, you can use the Thule The Stacker # TH830. It mounts directly onto the crossbars and utilizes a combination of...
  view full answer...
• Roof Rack Options for Adding a Yakima SkyRise Tent on a 2011 Subaru Forester
  To determine if the factory crossbars on your 2011 Subaru Forester are compatible with a rooftop tent you will first need to see if there are any specifications for the tent. For example, the Yakima SkyRise, part # Y07436 for 2 people, requires that your roof rack be supported and no higher than 98" off of the ground. Both the roof of your vehicle and the roof rack need to have a minimum load capacity of 165 lbs as well. I have attached a photo that you can use as a guideline for your...
  view full answer...
  
• Can a Pelican Trailblazer 100NXT Kayak Use a Malone J-Style Kayak Carrier on a 2012 Subaru Forester
  From what I could find on your Pelican Trailblazer 100NXT kayak, you should have no problem transporting it on your 2012 Subaru Forester using a Malone J-Style Kayak carrier like the Malone FoldAway # MAL98FR. The Pelican Trailblazer 100NXT kayak has a pretty standard shaped hull and weighs 36 lbs., therefore the Malone FoldAway Kayak Carrier # MAL98FR will work to carry your kayak. The # MAL98FR has a weight capacity of 75 lbs. You will need crossbars on your Forester to use the Malone...
  view full answer...
• Roof Rack Recommendation for a 2009 Ford Flex with Vista Roof
  You will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
  view full answer...
• Recommended Fixed Point Roof Rack For 2015 Mazda CX-9 Naked Roof
  There are a couple options to fit the fixed mounting points of your 2015 Mazda CX-9. I recommend the Thule Rack consisting of: Thule WingBar Load Bars - Aluminum - Black - 53" - Qty 2 # TH711420 Thule Podium Foot Pack for Aero Bars # TH460R Thule Fit Kit for Podium Style Foot Pack, # THKIT3069 We also have the Yakima rack which also has a great reputation consisting of: Yakima JetStream Crossbars - Aluminum- 60" Long - Qty 2 # Y00426 SkyLine Towers for Yakima Crossbars - Fixed Mounting...
  view full answer...
• Will the Surco Safari Roof Baskets Work with Rola Roof Rack Crossbars
  I do have an option that will allow you to mount a Surco Safari Basket to the roof of your 2017 Ram ProMaster City but the crossbars of the Rola Haul-Your-Might Truck Bed Ladder Rack 59742 will not work with the mounting feet used on the ProMaster City Roof Rack by Rola 59633 because the crossbars on the ladder rack are too long for your vehicle. Since the crossbars are different lengths the mounting holes on the feet will not line up with the mounting holes on the crossbar. Also, the...
  view full answer...
• Yakima Roof Rack Components Needed For A 2015 Kia Soul
  Idk exactly how you got to that specific page but it's only including the Yakima JetStream crossbars # Y00425 and Landing Pads for Yakima SkyLine and Control Towers # Y00233 and does not include the towers needed. For a 2015 Kia Soul with a naked roof you would need the following components: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22...
  view full answer...
  
• Recommendation for Carrying 2 Kayaks on a 2017 Subaru Impreza
  We do have a hitch that will fit your 2017 Subaru Impreza, which is the Draw-Tite # DT24959. If you choose to tow a Kayak trailer, this hitch will work well. However, when I looked up the owner's manual for your Impreza it said that your vehicle was not made or intended for towing trailers. I have another solution that will not void your vehicle's warranty. Yakima has a roof rack system that will allow you to carry both Kayaks, as long as you do not go over your Subaru's roof weight capacity....
  view full answer...
• Correct Yakima Landing Pad to Fit 2020 Subaru Impreza
  The Landing Pad 11 # Y00233 will fit your 2020 Subaru Impreza as long as it's a Sedan (4-door) with no existing rails or crossbars on the roof. Please note that you will need 2 sets of the Landing Pad 11 to complete your roof rack. I really like the JetStream crossbars so for a complete roof rack you will need the following: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 SkyLine Towers - # Y53TR Landing Pad 11 - # Y00233 Key System - # Y07204 (optional) If you happen to...
  view full answer...
• Roof Rack Recommendation for 2016 Subaru WRX STi
  We do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
  view full answer...

Do you have a question about this Roof Rack?