Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. Drop leg provides 4-1/2" of additional lift. Includes 9" footplate.
Features:
Specs:
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
Average Customer Rating: 4.0 out of 5 stars (19 Customer Reviews)
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. Drop leg provides 4-1/2" of additional lift. Includes 9" footplate.
I purchased this jack because it is the exact same model as the jack installed on the trailer at the factory. I have attached a photo of the one I removed. I had the trailer power washed and the spray damaged the membrane that covered the three switches that operate the jack. The resulting exposure damaged the switches which could not be repaired. Not the best design in my opinion.
ordered overnight and got in a timely f ashion!!!
Gamechanger, so much better than a hand crank
I am replacing my 2 year old Smart Jack. The old one broke. The "buttons" on the Smart Jack are flush and difficult to press sometimes. My biggest complaint is that the plastic covering the "buttons" fade in only 2 years. My wife is sewing a cover to protect it from the sun. I do give 5 GOLD STARS to etrailer.com. Your website is easy to navigate and there is a generous amount of infomation and video on your products.
I own two of these jacks and they've worked well for the most part. The nice feature is the ability to press a combination of buttons and it will either retract or rise to a pre set height without you having to hold down the button, which is very convenient and allows you to hook up other parts of the trailer while it is working.
The downside is one of the jacks immediately developed a crack in the top of it. There was a recall on this jack where a crack would happen and water intrusion would cause the jack to extend when you are driving....not good. My jack wasn't part of the recall, but likely they really didn't fix the problem, so it still happens on some units. I did request a warranty repair and after many back and forth questions about my trailer, they would repair it, but the shipping expense was on me. Now shipping is going to add up to 1/3 or more of the item cost and I also won't have a jack for a little bit, so I'm just going to risk it.
So it is a nice product because the jack has some unique features, however the known issue of the cracking of the unit is kind of annoying.
This jack has plenty of power for raising and lowering my 10,000 lbs camper.
The automatic features are annoying and get in the way of easy operation. The memory setting is useless because it never works. The automatic down works ok.
I regret buying this model and intend to purchase a simple up/down one in the future.
This is the model jack that came standard with my grand design reflection TT. The one that came with the unit new was replaced by recall. The replacement lasted 2 seasons
and cracked causing water to ruin the electrics. I wanted to keep everything stock so purchased the third. I also keep a cover on it to protect that cheap plastic on the controls. I won't hate to see this one go and join his two brothers in jack heaven.
etrailer is great to deal with and I will do business with them in the future.
Kept draining battery and could not work off of the truck when plugged in. Trailer customer service couldn't be reached by phone and never returned email request for help.
Easy to install. Some nice improvements over the older model.
I ordered a few things that day from some other companies and this is the only thing that has made it to me. Very happy with Etrailers being so fast to get my products to me. And it was very easy to instal.
Smart Jack arrived in just a couple days and looks great. Will install later do to weather but expect it will work great.
Just what I needed to keep my arm from getting cramps from winding the stupid crank!
Very easy to install and wire.
Always fast shipping and exactly as des cribed!
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
6/16/2022
The Smart Jack has taken to just clicking when the down arrow is pressed. I have to break out the crank handle to lower the tongue of the trailer. If I have to replace it AGAIN it will not be a Lippert jack. Totally dissatisfied!