1. Camper Jacks
  2. Ultra-Fab Products
  3. A-Frame Jack
  4. 5500 lbs
  5. Bolt-On
  6. Electric Jack
Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs

Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs

Item # UF38-944055
lowest price pledge
Retail:$664.05
Our Price: $478.95
You Save: $185.10
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 33 lbs
Quantity: 
In Stock
UF38-944055 - Electric Jack Ultra-Fab Products Camper Jacks
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

This electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. The built-in LED light provides simple nighttime operation. Offers 26" of total lift. Call 800-298-8924 to order Ultra-Fab Products camper jacks part number UF38-944055 or order online at etrailer.com. Free expert support on all Ultra-Fab Products products. Guaranteed Lowest Price and Fastest Shipping for Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (20)
  • Q & A (20)
  • Photos
  • Why etrailer?

Ultra-Fab Products Camper Jacks - UF38-944055

  • A-Frame Jack
  • 5500 lbs
  • Bolt-On
  • Ultra-Fab Products
  • Electric Jack
  • 26 Inch Lift
  • 2-1/4 Inch

This electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. The built-in LED light provides simple nighttime operation. Offers 26" of total lift.


Features:

  • Electric jack lets you lift and lower your A-frame trailer quickly and easily
  • Efficient ball screw makes it fast and easy to position your trailer
    • Ball bearings roll along sturdy, threaded steel rod
  • Powered drive provides quiet operation and eliminates the need for hand cranking
  • Easy-to-access on/off and retract/extend buttons make for simple operation
    • Buttons on front panel will not break off like standard toggle switches
  • Wireless capability - operate jack with included remote control key fob
  • Hitch memory function stores hitch height and weight distribution system height to make hooking up simple
    • Automatically returns your trailer to the position at which you unhooked
  • LED courtesy light on front of jack allows for simple nighttime setup
  • Durable powder coat finish resists corrosion
  • Emergency override allows manual operation in case of power failure
    • Included adapter allows you to easily use your drill to raise and lower the jack
    • Manual crank handle not included
  • Bolt-on installation


Specs:

  • Bracket height:
    • Retracted: 10-1/2"
  • Total lift: 26"
    • Screw travel: 21"
    • Drop leg travel: 5"
  • Lift capacity: 5,500 lbs
  • Outer tube diameter: 2-1/4"
  • Footplate diameter: 7"
  • Motor attributes:
    • 12 Volt
    • 10" Travel in 47 seconds
  • 2-Year warranty


Ball Screw Technology

The Phoenix electric trailer jack uses ball screw technology. Instead of raising and lowering the jack with a standard Acme screw, the Phoenix incorporates a strong threaded steel rod with ball bearings. These ball bearings roll along threads between the rod and the nut, so there is no direct surface-to-surface contact between the rod and the nut. This extends the life of the electric jack by creating less friction along the threads, which leads to less heat and wear. As a result, the motor is able to operate more efficiently, leading to improved performance and increased longevity.


Manual Override Feature

An important feature with any electric jack is the manual override option. The Phoenix electric trailer jack is equipped with a 9/16" deep well socket that can be used with your electric drill to raise and lower your jack in case of a power failure. Just insert into the end of the drive collar and ratchet clockwise to retract and counterclockwise to extend.

38-944055 Ultra-Fab Phoenix Power Trailer Tongue Jack - A-Frame - 21" Travel - 5,500 lbs






Customer Reviews

Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs - UF38-944055

Average Customer Rating:  4.5 out of 5 stars   (20 Customer Reviews)

This electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. The built-in LED light provides simple nighttime operation. Offers 26" of total lift.

- UF38-944055
by:

this is working great, the remote is a very handy addition 601481


Comments
This thing is a beast!!! still going strong . I have had zero problems , well it does pick the whole rear end of the truck up with it if Im not looking, lol
Joseph M - 01/31/2020

65111

- UF38-944055
by:

I purchased this product to replace one that has given me good service for several years but which I felt I was working it to close to its limits. My selection of this electric tongue jack was for it's 5500 Lb rated load capability but I do like both the remote control unit (that comes with it) as well as the Jack's face plate controls that also have a memory function for both up and down positions. I was surprised how well the unit worked with the factory memory calibration settings for my application which made the installation go much faster. While I had to run an extra 10 guage ground wire back to the battery, I like that they do this to make sure there is no possible chance of the jack motor not being properly grounded. The only reason I did not give it all 5 stars is because I reserve the highest rating until I am able to see from experience that it is warranted. 703648



- UF38-944055
by:

GOT THE RIGHT PART, AND SHIPPING OVER NIGHT WASN'T NEAR AS BAD AS I THOUGHT IT WOULD BE. GREAT CUSTOMER SERVICE. 642186



- UF38-944055
by:

should have bought it when I bought my trailer 830394



- UF38-944055
by:

The first jack we received failed in the control circuit after the first use. Ultra-Fab was very good about sending a replacement jack after some brief troubleshooting. The second jack has performed well for the past year. It hasn't struggled at all to lift our trailer and the remote is a very convenient feature... although the remote control occasionally struggles with keeping a good signal and requires pushing the buttons repeatedly. 795991



- UF38-944055
by:

it makes a grinding /clunking noise without any weight on it 785199



- UF38-944055
by:

The product we received is great but the customer service we received from etrailer.com was the best! Our original order was damaged in transit and we contacted etrailer. They immediately shipped us a new unit and supplied us with a shipping label to send the damaged unit back. They couldn't have made it any easier. Very pleased! 759165



- UF38-944055
by:

We got the jack installed on the trailer. So far I am happy with it. Easy to program the position memory buttons and no issues doing so. My only concern is if we have a power failure, cranking the jack by hand is next to impossible. Time will tell, with the warranty, I'm not concerned. If it fails, I will let you know! 683042



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


this jack works perfectly my trailer is heavy!!! 296149



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


Best jack out there. The fast up and down speed along with the 2-button memory makes this jack the best one out there in my opinion. Mine had 2 memory buttons (a lot of the promo material suggested only 1 memory button) so I can set one for the extended/hitching position, and a second for the fully retracted position. Thus, I never need to hold extend/retract...rather I just hit one of the memory buttons and it does the rest. Huge time saver. To set the memory on mine I hold the desired memory button and wait for the light to flash red (not green like the manual said). The drop foot is also a nice feature. I would strongly recommend this jack. 289214



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


Should have bought this years ago. Make connecting and disconnecting so much easier. In addition, very easy to install. 790804



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


Good product at a great price with prompt service 738732



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


This Jack is crazy fast. Moves smooth and doesn't seem to struggle in the slightest. My only concern is that there is no positive power shut off. Im an electronics tech and ive seen touch buttons like this fail in moisture environments. This seems well built but I didn't want it moving down when driving so a simple on off switch was added. Concern solved. 645200



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


Great quality and so much faster than the stock one on my jayco 222 toy hauler. 637945



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


fast delivery works great 539660



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


Works great. I’d hate to have to raise manually but never been an issue 521741



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


Sometimes the controls seem to delay but other than that has been a great jack. 484905



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


Great product works really well Definitely made my life easier Thanks Mel 442390



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


I am awaiting my 4th on that should arrive today. I have not had any good luck with this model. For some reason it will work for a bit then just quit. the warranty is the only thing that is keeping me with this product. I am hoping this next replacement will last but we shall see. 352225



- UF38-944040
by:

Review from a similar Phoenix in Camper Jacks


This is the best jack I have had (and I seem to have gone thru quite a few). It was a quick and easy install for a replacement and I have found it is the fastest jack to raise or lower my hitch. It is also one of the quietest I have ever used. Great for early morning packing and not waking up all the neighbors. :) The jack seems a lot stronger than other jacks I have used and better built with less plastic on it than most. Would definitely replace any manufacture supplied jack on a new trailer with this one again on a heartbeat! 294153


Comments
I have had a problem with the switch on this jack. It was the first generation of the jack. I spoke with Ultrafab and they replaced the whole jack with a new one without any issue to correct the issue. I am very impressed with the Jack and especially the great customer service! Cant be beat!
Lonny A - 09/13/2017

28156
20
20

Ask the Experts about this Ultra-Fab Products Camper Jacks

  • Troubleshooting Ultra-Fab Phoenix Electric Tongue Jack That Won't Extend or Retract
    The Ultra-Fab Phoenix Electric Trailer Jack with Remote- 5,500 lbs # UF38-944055 or 4,000 lb # UF38-944040 without remote sounds like it may have a mechanical issue. I recommend using the manual crank to extend or lower the jack. If you can use this, then you isolate the issue to electrical with a possible bad ground or motor issue. If you can't physically move the jack with the manual crank then we know the issue is mechanical with the inner rod seized or having stripped threads. If...
    view full answer...
  • What Type of Trailer Wiring Connector to Put on Wiring of Trailer Jack to Easily Power It
    The type of trailer connector you'd need to install on the wiring of the Phoenix Electric Trailer Jack with Remote # UF38-944055 to allow it to plug into a vehicle connector and work would be a 7-way. 7-ways have a circuit designed for 12 volt accessories that runs to the vehicle's positive battery post. This is the pin in the 1:00 position if you were looking into the connector on a vehicle. So you could take the power and ground wire from the powered trailer jack # UF38-944055 and...
    view full answer...
  • Recommendation on an Electric Trailer Tongue Jack to Fit a Concessions Trailer Weighing 10K
    When looking to purchase an electric trailer jack, there are a few features you want to keep in mind when comparing between brands. Power draw, weight capacity, and maximum lift height will be the features that will be important in deciding on the correct jack application that will work for your needs. With this in mind, the jack that I recommend with the information that you provided is the Ultra-Fab Phoenix, # UF38-944055. The jack has a lift capacity of 5,500 lbs and a total lift...
    view full answer...
  • Trailer Jack Just Clicks and Will Not Raise Trailer
    The first thing I recommend checking on the jack is the power source. If the battery that runs the jack is low on power then it will be hard for the jack to lift the trailer (lowering it tends not to be a problem because gravity is helping) and it may just refuse to do anything. If the voltage on the battery is good and the wiring is all intact then it is possible that the jack had been over extended at some point and the screw and/or nit inside is damaged. This would mean that a replacement...
    view full answer...
  • Electric A-Frame Trailer Jack with the Most Lift for a 7.5K Trailer and 2013 Ford F-250
    Basically, the higher the capacity of the jack used the easier it will be for the jack to operate and the longer it will last. The highest capacity A-frame jack that we have is # UF38-944055. It's rated up to 5,500 pounds and also has the highest lift of any of our jacks at 26 inches. A trailer that weighs 7,500 pounds would have a tongue weight around 750 to 1,125 pounds (10 to 15 percent of the gross trailer weight) so a jack rated for 4,000 or 4,500 pounds could handle it with ease.
    view full answer...
  • A-Frame Trailer Jacks that Have Highest Lift Ability
    The powered A-frame trailer jack we offer that has the highest possible lift is the Phoenix Trailer Jack part # UF38-944055 which can lift up to 21 inches and has an extension foot for an additional 5 inches. This puts it at a total of 26 inches. Then the manual crank jack we offer that has the highest possible lift would then be the Ultimate Trailer Jack part # 322-RDJ-2K which can be configured to give up to 27-1/2 inches of lift.
    view full answer...
  • What is Electric Fastest A-Frame Trailer Jack
    The fastest powered a-frame jack we offer is the Phoenix Jack part # UF38-944055 that you referenced which can travel 10 inches in just 47 seconds. Depending on where you would mount the battery would determine if you'd need a battery box.
    view full answer...
  • Electric Trailer Jack With Dead Battery on Trailer
    No, your Phoenix Electric Trailer Jack with Remote # UF38-944055 is not able to operate while connected to your truck if the trailer battery is dead, since drawing power from the truck battery via the 7 way connector will most likely overload the jack and blow a fuse. The electric jack should only rely on the trailer battery to be operated. In order to operate your electric trailer jack, you'll need to connect the trailer to the vehicle or connect the battery to an external charging...
    view full answer...
  • How Does the 5K Husky Super Brute Electric Trailer Jack Get Power
    The Ultra-Fab Phoenix trailer jack # UF38-944055 does get powered by a trailer-mounted 12 volt battery. It has a power wire that will attach to the positive battery terminal or to the 12 volt circuit at a junction box (if the trailer is equipped with one). The other wire is then attached to the negative side of the battery. Another option is Ultra-Fab jack # UF38-944037 which plugs into a 7-Way trailer connector to get its power from the 12 volt circuit. This jack is rated for 3,500...
    view full answer...
  • Warranty of Phoenix Electric Trailer Jack With Remote
    The Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs # UF38-944055 has a 2-year warranty. I have added a link to a video review of this jack for you to take a look at.
    view full answer...
  • Will Wireless Trailer Jacks Remotes Interfere with Each Other
    Anything that uses a wireless remote does have the potential to interfere with another wireless device. The best solution would be to use hardwired (traditional) powered jacks to avoid that issue completely. I recommend a different approach using one of the Phoenix jacks, # UF38-944055, and then using a stabilizer with 2 motors like # UF39-941705. Please note that jacks are not meant to hold up a trailer indefinitely. You would need to place jack stands under the trailer if it needed...
    view full answer...
  • Small Powered Trailer Jack Recommendation for Tailgate Clearance
    I have a few different options for you and it all depends on what you're wanting out of a trailer jack for your 2017 Forest River Rockwood Signature Ultra Lite 2703WS. The absolute best clearance you'll get is with the Trailer Valet JXC Trailer Jack w/ Footplate # TV94FR because it uses a hand crank, but then you can use your drill then you want it to operate faster. Using this means you don't have to make connections to your trailer battery plus you won't have the trailer jack motor...
    view full answer...
  • Trailer Jack Recommendations for a 10,000 Pound A-Frame Trailer
    A trailer jack only lifts part of the weight of the trailer and not the whole 10,000 pounds of your trailer. A 10K trailer would have a tongue weight of around 1,000 to 1,500 pounds. But the higher the capacity of the jack the easier it is for the jack to lift the weight and the longer it will last. A jack rated for 5,000 pounds such as # TJA-5000S-B is an option. You could add foot # JF-99 as well. I have linked a video review of the jack for you. If you'd prefer an electric jack...
    view full answer...
  • Mounting Bolt Hole Pattern for etrailer Square A-Frame Jack w/ Footplate
    The mounting hole pattern on the Square A-Frame Jack w/ Footplate # TJDA-5000S measures 3" on center, with the front mounting hole being a little longer just to accommodate any slight variances. This is the standard mounting hole pattern for A-Frame trailer jacks so it will fit on your toy hauler trailer. The A-Frame jack with the most lift capacity that we have available is the Phoenix Electric Trailer Jack # UF38-944055 which is rated for 5,500 lbs and is an electrical jack with a...
    view full answer...
  • Recommendation for a Powered A-Frame Trailer Jack
    For a Bulldog A-frame trailer jack like # BD155032, or a similar jack, there is not an electric conversion available. For a powered A-frame jack, the highest capacity we carry is a 5,500 pound model # UF38-944055. Since it will be at the front of the trailer, all of the trailer weight will not be on it, just the tongue weight of the trailer. Provided the tongue weight of your trailer does not exceed 5,000 pounds, this jack will work. I have incldued a link to an FAQ article that shows...
    view full answer...
  • Electric A-Frame Trailer Jack Recommendation for a 2010 Coachmen Freedom Express Lite 280RL
    Stromberg Carlson Electric Trailer Jack # JET-3755 is purported to have steel gears. But what I recommend is the Ultra-Fab Phoenix # UF38-944055. It is built with ball bearings (instead of a nut) that roll smoothly along the threads of the screw shaft and the nut. This creates less friction and heat which can lead to failure on screw and nut jacks. This jack also features a wireless remote which is handy. The 5,500 pound rating will also mean that the jack will not have to work as hard...
    view full answer...
  • How To Pair a Remote with the Ultra-Fab Phoenix Electric Trailer Jack
    If you have a remote for your jack then you actually have the Phoenix Electric Trailer Jack part # UF38-944055, not the Ultra-Fab Electric A-Frame Jack part # UF38-944016. That said, I am having trouble determining what you mean by the pin number or why you would need that and I did run this by Ultra-Fab as well. If you have the remote and it is not working then you first need to check the battery but then re-pairing would be a good option as well. I have attached the re-pairing procedure...
    view full answer...
  • Is Replacement Bolt for Head of Husky Brute Jack Available
    I reached out to my contact at Husky and she said that those bolts aren't available as replacement parts so if you are outside of the 1-year warranty then the only option is to replace the jack. If you really like the jack then we have the 4,500 lb Husky Brute # HT87247 but if you'd like to look for a different jack then I recommend the Phoenix Electric Trailer Jack # UF38-944040 which has a slightly lower rating at 4,000 lbs but it boasts an impressive travel speed of 10" in 18 seconds....
    view full answer...
  • Troubleshooting Husky A-Frame Jack Not Moving with Manual Hand Crank
    If you've ensured that the brake is off and you still aren't able to get your Husky jack to move then it sounds like you need to replace your trailer jack as the internal components are damaged. You can either replace it with another Husky jack like the Brute # HT87247 which is rated for 4,500 lbs and doesn't require maintenance on the internal components but once a year, or you can go with an upgraded A-Frame jack like the Phoenix Electric Trailer Jack with Remote # UF38-944055 which...
    view full answer...
  • What Is the Torque Rating of the Stromberg Carlson Electric Trailer Jack
    I spoke with Stromberg Carlson about the Stromberg Carlson Electric Trailer Jack part # JET-3755 but they were not able to provide any sort of torque specifications for the motor. That said, I was able to get some information about the speed of the motor which is 55.5 seconds for 10" of travel with no load. I am not sure if this helps or not but most trailer jack manufactures won't have the torque figures you are looking for to compare. The Phoenix Electric Trailer Jack part # UF38-944055...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Randy B
Updated by:
Sarah W
Updated by:
Hannah L
Video by:
Zach D
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.