bing tracking image
  1. Trailer Suspension Parts
  2. SuperSprings Intl
  3. Leaf Spring Enhancement System
  4. Boat Trailer
  5. Camper
  6. Car Hauler
  7. Snowmobile Trailer
  8. Utility Trailer
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung
SuperSprings Intl

SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung

Part Number: SS26MV
In Stock
$294.99
Retail:$325.87
You Save: $30.88
Trailer Suspension Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride. Great Prices for the best trailer suspension parts from SuperSprings Intl. SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung part number SS26MV can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (273)
  • Q & A (0)
  • Photos
  • Used (1)

SuperSprings Intl Trailer Suspension Parts - SS26MV

Highlights

  • Progressive spring rate: Adapts to load, ensuring a smooth ride on any terrain.
  • Improves suspension and handling: Provides extra support, reducing sway and roll.
  • Maintenance-free design: No air pressure to monitor or tubing to run.
  • 900 lbs at 50% compression: Effective and sturdy support, even for heavy trailers.
  • Simple, no-drill installation: Quick setup with included hardware for easy DIY.
  • Enhanced durability: Made from patented micro-cellular urethane that won't leak.

Features to know about

Enhance Trailer Stability: Progressive Spring Rate Jounce Springs

Conquer rough roads with ease as SumoSprings Trailer Helper Springs progressively adjust their rigidity based on the load. These jounce springs provide exceptional stability and diminish trailer sway, acting like shock absorbers that cushion your journey, especially when cornering or swerving. Perfect for single, overslung axles, they support 5,000 to 8,000 lbs. Effortlessly tackle off-center loads and wild rides knowing your trailer is in good hands.

Smooth and Comfortable Rides: Increased Ride Height and Weight Support

Say goodbye to bottoming out! These helper springs elevate your trailer’s ride height while delivering additional support to your leaf springs. Capable of handling up to a 900 lb capacity at 50% compression, they significantly enhance suspension, handling, and safety, ensuring every journey is smooth and comfortable.

Easy Installation: No-Drill Design and Maintenance-Free

Ditch the drill and complicated installations! The SumoSprings come with a no-drill design and comprehensive mounting hardware, including two jounce-style springs and a line relocation bracket. Simple to install, they eliminate the need for air pressure adjustments, blending convenience with performance. Built with patented micro-cellular urethane, they promise long-term durability without leaking or rupturing.

Combat Rough and Bumpy Roads: Reduces Vibrations and Absorbs Shocks

These springs are a true game-changer for hauling heavy loads over less-than-perfect roads. By absorbing vibrations and shocks, they reduce the strain on your leaf springs, decreasing vibration-induced wear and ensuring your trailer's suspension system lasts longer. Enjoy reduced body roll and less chucking during those long hauls across the country.

Tailor Your Setup: Adjustable with Spacers

For those who seek a custom fit, the SumoSprings come with four 1/2" spacers, allowing for precise adjustments to match your trailer’s specific needs. If you require more height, additional spacers can be sourced easily from local hardware stores to achieve perfect compatibility and enhance performance.

Peace of Mind Towing: Built to Last with Lifetime Warranty

Invest in a product made in the USA with the confidence of a limited lifetime warranty and a 30-day satisfaction guarantee. Designed to work with a well-maintained suspension system, these helper springs reduce the overall cost of ownership, promising both improvement in your ride quality and peace of mind for years to come.

Specs

Application

  • Application: 5,000-lb to 8,000-lb single, overslung axle - springs sit over axle
    • For tandem axle applications, use 2 kits

Capacity

  • Capacity: 900 lbs at 50 percent compression
    • Do not exceed the trailer's weight-carrying capacity

Spring Dimensions

  • Spring dimensions: 5" tall x 4" diameter
    • Compresses up to 65 percent of original height with full memory rebound

Required Clearance

  • Required clearance between top of spring plate and bottom of trailer frame: 5-5/16" - 6-1/2"

Warranty and Guarantee

  • Limited lifetime warranty
  • 30-Day satisfaction guarantee

Note

Does not work with spring plates wider than 4-1/4".

TSS-107-47 Sumo Springs 5,000 lbs - 8,000 lbs GAWR Trailer Helper Springs w/ Bracket - Overslung

Installation Details SS26MV Installation instructions



Customer Satisfaction Score:


Customer Reviews

SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung - SS26MV

Average Customer Rating:  4.7 out of 5 stars   (273 Customer Reviews)

Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Came on the day promised and all the parts are there.



by:

Thank you for the quick responses and fast delivery



by:

Order process was easy. Parts arrived on time.



by:

Everything came in excellent condition as expected. Great products.



by:

Sumo's are the best


25
273
Show More Reviews

See what our Experts say about this SuperSprings Intl Trailer Suspension Parts

  • Will Over/Under Kit Work With MORryde X-Factor Crossmember
    Hey Peyton, Yes, those things are all indeed compatible as the crossmember won't come into contact with the over/under kit. As for the correct kit, that depends on the size of your Keystone Cougar's axles. For 2-3/8" diameter axles use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00; for 3" diameter axles use the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00. Then you can use the SumoSprings but you need to have between 5-5/16" and 6-1/2" of clearance...
    view full answer...
  • How to Reduce Ford F-250 Jiggling From Grand Design Travel Trailer
    There are a few different things you can do to help with this. It would also be helpful to know what kind of jiggling you're experiencing. Does it just feel bouncy and rough? Is it side to side motion? If your travel trailer weight is more than 50% of your trucks GVWR then it would be a good idea to use a weight distribution hitch which will level you out and reduce sway. If it is more like a rough ride then you could try an upgraded equalizer, shocks, or adding something like SumoSprings...
    view full answer...
  • Are There Extra Spacers for the SumoSprings Trailer Helper Springs
    I do have an option for you but SuperSprings does not offer any additional spacers for the SumoSprings Trailer Helper Springs part # SS26MV. That said, we do still have spacers that will work for this, the Timbren Spacer part # A25723-90AH00 for 1" or part # TA25722-90P00. These won't be the exact same as the ones that came with this kit but they will still work well. In regards to the carriage bolts, you'll need to source this locally from a hardware store.
    view full answer...
  • Can Additional Spacers Be Added To SumoSprings Trailer Helper Springs?
    I have seen an additional spacer added to the SumoSprings Trailer Helper Springs # SS26MV. The kit does include four 1/2" spacers already for customizing your fit. If you need an additional 1" Spacer # A25723-90AH00 you would need to source longer bolts from a local hardware store.
    view full answer...
  • Is It Normal To Have a Different Amount of Spacers for the Sumo Springs Trailer Hepler Springs
    I spoke with Super Springs about your SumoSprings Trailer Helper Springs w/ Line Relocation Bracket # SS26MV and they said that it is normal to have different amount of spacers on each side and they recommend you leave it as is, as to much compression can cause issues with that spring, but as long as you are in the targeted range it is fine.
    view full answer...
  • Will The SumoSpring Trailer Helper Springs Help To Reduce The Trailer Jerking and Chucking?
    While the SumoSprings Trailer Helper Springs # SS26MV are primarily designed to assist the leaf springs on the trailers and smoothen out the road shock being transferred from the wheels to the trailer it will only have a minimal impact on jerking and chucking. The best way to help with chucking and jerking is with a Cushioned Hitch # SHK29VR or Pin Box # MR94VR depending on your application. If you can tell me what trailer you have along with the truck and method of towing you are currently...
    view full answer...
  • Best Sumo Springs For 2024 Open Range Roamer 364BSH
    Hello Camilo, thanks for reaching out. For your 2024 Open Range Roamer 364BSH I recommend the SumoSprings Trailer Helper Springs # SS33HR. These are made for axles rated between 5,000-lbs and 8,000-lbs. I am not sure exactly what axles are on your camper since that info is not listed online, but since your GVWR is 13,500 lbs your axles must be rated for something like 7,000 lbs apiece. I do suggest that you check your axle tag to verify the weight capacity but as long as it is between 5K...
    view full answer...
  • Can I Install Sumo Springs On A Curt Axle With ABS (Anti Lock Braking System)
    That is a great question. Curt (formerly Lippert) has very recently started offering ABS axles for newer Solitude models. We have not gotten a chance to attempt to install a Sumo Spring kit like the # SS26MV on an axle with the anti lock braking system. It certainly will be an issue with these Curt axles going forward. As of right now it we cannot say with certainty what will fit and what won't. That said, we do not recommend modifying the clamps or brackets in any way as this will void...
    view full answer...
  • Recommended Replacement Shackles and Wet Bolts for a 2020 Grand Design Solitude 380FL
    Sorry about your troubles, I would be worried about the other ones failing too. To replace the shackles and wet bolts you will want to use the MORryde Suspension Upgrade Kit with either 2-1/4" Strap Kit item # MR46ZR or a 3-1/8" Strap Kit item # MR76ZR. You will need to measure the length of your current shackles and pick the kit closest to them. As far as replacing your leaf springs and equalizers go there's no better time to do it if you're already replacing your shackles and wet bolts....
    view full answer...
  • Can I Use Helper Springs on My 2020 Grand Design Solitude Fifth Wheel with 2 Axles Rated at 7k?
    Hello Steve, Yes, you can most definitely add helper springs! This is a great way to improve your ride quality better while towing. I see that the 2020 Grand Design Solitude Fifth Wheel comes with 2 axles rated at 7k so you will want one of the following: If your leaf springs are located at the top of your axle you will want the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung # SS26MV. If your leaf springs are located under the axle...
    view full answer...
  • Recommended Trailer SumoSprings For A 2014 Keystone Cougar 19RBLTravel Trailer
    Hey Clark, Trailer SumoSprings are based on axle capacity and the orientation of the leaf springs. You'll want to match the capacity of the spring to the axle's capacity and also take a look to see whether your leaf springs sit above or below the axles. If they sit above then you have an overslung suspension, if they sit below you have an underslung suspension. Overslung: 3k - 5k # TSS-107-40 Underslung: 3k - 5k # TSS-106-40 Most likely you have an underslung suspension since it's...
    view full answer...
  • Recommended SumoSprings For A 2016 Forest River Wildwood 28DBUD Travel Trailer
    Hey Lance, To determine the correct SumoSprings for your 2016 Forest River Wildwood 28DBUD we'll need to first see if your leaf springs sit above or below the axle and we'll need to know the axle capacity. If your springs sit above the axle then you have overslung suspension and if they sit below the axle you have an underslung suspension. For the capacity you likely have a 3,500-4,400lb axles but you can verify by looking at the axle for the a sticker that lists the capacity. I've separated...
    view full answer...
    Image 1 for
  • Sidewinder Pin Box for 2022 Wildwood Heritage Glen 5th Wheel
    The ST200 turret for the # 5AS16K has been discontinued. You may be able to find it still but I wasn't able to when I ran a quick search. At this time, the only Sidewinder we offer that fits the 1621 is the # RP34FR. Also, you aren't hearing from Reese because they're owned by First Brands now. Ever since this change the wait times on the phone are extremely long and many of their parts are gone or on indefinite backorder. The # RP34FR will help with clearance but it won't do anything...
    view full answer...
  • Replacement Bearings for a Dexter 7,000 lbs Axle and Wet Bolts for a Morryde CRE 3000
    I sure can! To replace the bearings in your 2023 Grand Design with Dexter 7,000 lbs axles you will need the following parts: Inner Bearing - Replacement Trailer Hub Bearing item # 25580 Outer Bearing - Replacement Trailer Hub Bearing item # 14125A These part numbers are for the individual replacement bearings. We do have options for complete kits that also include the races and grease seals, however there's two options for grease seals on Dexter 7,000 lbs axles. You will want to use...
    view full answer...
    Image 1 for
  • MORryde CRE3000 Equalizers, X-Factor Cross Members & SumoSprings For 2020 Keystone Outback 291UBH
    Thank you for the images. The MORryde Rubber Equalizers # MR87ZR are the correct set for your 2020 Keystone Outback Ultra-Lite 291UBH. You will pair this with the MORryde Suspension Upgrade Kit # MR46ZR. Instead of using the wet bolts included with the upgrade kit you will use the wet bolts included with the 3 MORryde X-Factor Crossmembers # MR33WR. You are still able to use 2 sets of the SumoSprings Trailer Helper Springs # SS26MV with your suspension. These kits include line relocation...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Why Is It Not Recommended To Step Up to 8,000LB Leaf Springs Instead of 7,000LB Leaf Springs?
    We do not recommend moving from 7,000lb # e64SR to 8,000lb # DX74XR leaf springs as this creates a stiffer ride with more bounce. This causes more shock to transfer inside your RV which can cause damage to the trim and electronics. Instead I recommend adding the SumoSprings # SS26MV for overslung axles or # SS33HR for underslung axles. These help to absorb shock from transferring in your trailer as well as give you more support to reduce sag in the leaf springs. Also adding heavier leaf...
    view full answer...
  • Troubleshooting Lower Suspension Height On a 371 Fuzion 5TH Wheel Toy Hauler With MORryde CRE3000
    It is normal for the rubber to push out of your MORryde Shock Absorbing Suspension Equalizers # MR27ZR the way it is. The main issue I see is your Shackle Strap # TRSL313 is wearing out. I can see a bit of the hole on the top left strap which means the holes in the strap are being elongated. I recommend replacing these immediately with one of the following kits. MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" # MR46ZR MORryde Suspension Upgrade Kit for Tandem Axle Trailers...
    view full answer...
    Image 1 for
  • Replacement Upgraded Cushioned Equalizer for Equa Flex
    Thanks for the picture of the Equaflex equalizers you have on your 2022 Genesis Supreme. Based on that it looks like you have the part # LC279688. Based on that the best recommendation I can make to replace them would be the EZ Flex part # K71-653-00 which has same capacity and dimensions but is known to be more reliable than other options. We don't have air bag kits that fit your trailer but we do have suspension enhancement kits that would fit like the SumoSprings part # SS26MV which...
    view full answer...
    Image 1 for
  • Solution to Help Keep Tires From Rubbing on 2019 Keystone Cougar on Rough Roads
    Hey Brian, thanks for reaching out! The measurements you have are similar to the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles # DX95CR so it sounds like your leaf springs aren't flattening out as of yet. If you drive on some pretty rough roads with the trailer close to max GVWR then that could definitely be why you're seeing tire marks. I recommend checking out the SumoSprings Jounce Springs for trailers to help soften the bounce from those roads. You'll just need to choose the...
    view full answer...
  • Will The SumoSprings Trailer Helper Springs Fit A 2022 Jayco North Point 382FLRB 5th Wheel
    The SumoSprings Trailer Helper Springs w/ Line Relocation Bracket # SS26MV could possibly be the correct kit for your 2022 Jayco North Point 382FLRB 5th wheel, you'll just need to verify the orientation of your leaf springs to the axles. The # SS26MV are designed for overslung axles, which means that the leaf springs will sit on top of the axle. If you have underslung axles (leaf springs below the axle) then you'll just need part # SS33HR instead. These kits are for a single axle only...
    view full answer...
    Image 1 for
  • Air Spring Suspension System For A 2021 Forest River Stealth 5th Wheel Toy Hauler
    Hey Charles, For air springs we currently only offer the Lippert Center Point by Trailair Air-Ride Suspension Upgrade # LC1565391. This system can help improve ride quality by reducing road shock and chucking. It does require standard hangers and the hangers must be spaced either 29 1/2” or 30 1/2” apart, otherwise you'll need to redo your suspension in order to complete the install. We also offer jounce springs that can help in the same way, just without the customization you'd get...
    view full answer...
    Image 1 for
  • Suspension Enhancement For a 2021 Grand Design Momentum 353G With 7,000LB Dexter Axles
    First I recommend the SumoSprings Trailer Helper Springs # SS26MV be added to your axles. As these are designed for a single axle you will need 2 of the kits. It seems strange that the springs would be damaged as they are not that old and are likely carrying a lot of weight. These helper springs will help relieve some of the weight and provide some additional support to your leaf springs. As they springs are progressive they also help to reduce a lot of the shock that is transferred through...
    view full answer...
  • Parts Needed For Reducing 7,000LB Leaf Springs On a 2021 Keystone Carbon From Flattening
    I do have a recommendation for you as switching out all your leaf springs on your 2021 Keystone Carbon 358 is a big undertaking. The SumoSprings Trailer Helper Springs # SS26MV are designed to work on 5,000lb to 8,000lb trailer axles and each set provides 900lbs or capacity at 50% compression. These springs are also progressive so they will help to absorb road shock while also providing support to your leaf springs giving a smoother ride inside your trailer to reduce the odds of damage...
    view full answer...
  • Upgraded Equalizers and SumoSprings for 2023 Grand Design Momentum 23G
    Since the parts are different for your 2023 Grand Design Momentum 23G we will go a slightly different route. You currently have a standard # TREQ104 equalizer on the trailer. That means the best fit is going to be the Dexter E-Z Flex Suspension Kit # K71-652-00. This includes the upgraded shackles, wet bolts, and bushing so there is no need to purchase them separately. I have this kit on my Jayco which you can see in the installation video below. For the SumoSprings you will need the #...
    view full answer...


< Previous
123. . .7



Do you have a question about this Trailer Suspension Part?


Used Items Available
Used Picture for SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung

Condition: Installed

Notes: Item has been installed/test fit. Otherwise still in good condition for its application.

$275.59
Add to Cart
Secure Checkout

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Manda E
Updated by:
Manda E
Employee Dustin K
Video Edited:
Dustin K
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Mike S
Written by:
Mike S
Employee Jacob H
Test Fit:
Jacob H
Employee Thomas T
Video by:
Thomas T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<