Electric Trailer Jack - Drop Leg - A-Frame - 22-1/2" Lift - 3,500 lbs
(108 reviews)
Price: $206.51
Electric Trailer Jack - Drop Leg - A-Frame - 22-1/2" Lift - 3,500 lbs
Item # 3370093500
Retail:$245.60
Our Price: $206.51
You Save: $39.09
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (108)
- Q & A (0)
- Photos
Buyers Products Camper Jacks - 3370093500
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 1 Jack
- 22-1/2 Inch Lift
- Buyers Products
- Bolt-On
Switch-operated jack has 18" of screw travel and a 4-1/2" drop leg. Retracted height is 9-1/2" and extended height is 27-1/2". 7-Way plug makes setup easy. Extends 6" in 29 seconds with 1,000 lbs of tongue weight.
Features:
- Electric jack lets you raise and lower your A-frame trailer quickly and easily
- 7-Way RV-style plug pulls power from your vehicle's trailer connector
- No need to manually wire for power
- Weather-sealed toggle switch on underside of housing extends and retracts jack for easy operation
- 2 LED lights on either side make it simple to set up your camper at night
- Red button on back of jack turns lights on
- Convenient built-in leveling gauge lets you see if your setup is level
- Integrated circuit breaker prevents motor damage
- Emergency crank (included) allows you to manually operate jack if needed
- Crank inserts into socket beneath level
- Drop leg allows for increased lift and saves time when raising or lowering
- Sturdy carbon steel construction
- Black powder coated outer tube
- Zinc-finished inner tube and footplate resist corrosion
- Easy bolt-on installation
Specs:
- Bracket height:
- Retracted: 9-1/2"
- Extended: 27-1/2"
- Total lift: 22-1/2"
- Screw travel: 18"
- Drop leg travel: 4-1/2"
- Travel speed (w/ 1,000-lb tongue weight):
- Extends 6" in 29 seconds
- Retracts 6" in 26.4 seconds
- Footplate diameter: 5-1/2"
- Outer tube diameter: 2-1/2"
- Clearance (bracket to top of level gauge): 19-1/2"
- Lift capacity: 3,500 lbs
- Motor: 12V
- Power cord length: 4'
- 1-Year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
0093500 Buyers Products 12-Volt Electric Jack
Installation Details
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Defective
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Electric Trailer Jack - Drop Leg - A-Frame - 22-1/2" Lift - 3,500 lbs - 3370093500
Average Customer Rating: 4.7 out of 5 stars (108 Customer Reviews)
Switch-operated jack has 18" of screw travel and a 4-1/2" drop leg. Retracted height is 9-1/2" and extended height is 27-1/2". 7-Way plug makes setup easy. Extends 6" in 29 seconds with 1,000 lbs of tongue weight.by: Daniel04/08/2024
The CargoBuckle G3 ratchet tie-down straps and 45 degree mounting brackets worked great. Makes loading and unloading a breeze.
by: Mark G.04/11/2022
This jack was the perfect solution for my application. I have a new enclosed trailer that came with a manual crank and only a tiny battery to run the lights. I did not want the expense of having to buy and cable up a larger battery to just support the tongue jack. Took me 5 minutes to install this new jack using the three bolts that were already on my OEM jack. Now I just back up my truck, plug in the 7-way, and I'm able to move the tongue up and down as needed. Great!
by: GLH05/03/2019
I love my new electric trailer jack ! It has a 7 pin RV plug which makes it so convenient to power. There are lights on both sides to shine onto the hitch after dark. There is a bubble level on top to know when the camper is at least level enough to start setting up. It all works great !
by: Jason 09/03/2023
This electric jack has made my life easier. I use my trailer for a mobile business and it has a 800lb tongue weight. This jack has seen a good amount of use in the last year and I've had no issues. This is a solid product and I'd recommend it.
by: Tom 08/02/2023
Product is great. Easy to install. Performs as expected. One of the best accessories I purchased for my race trailer
by: Mara07/06/2023
Poor quality jack quit working. Again. This is the third Jack I’ve had to buy. It’s too expensive to send it back so there really is no point. I am never buying from you again.
by: Richard01/25/2023
Replacement of the manual jack with the "A" Frame electric jack is among the best purchases I have ever made. Ease of installation and operation make hook up and removable of my trailer almost effortless.
by: Jamie11/06/2022
Good jack but there are better on this site for the money. The light is useless. On the back side of the jack so does not help with connecting at night. The manual operation requires removing the mini bubble level with a small Phillips bit to use. Other jacks have a simple plug to remove by hand.
With all that said. It does perform the main purpose it was intended to do just fine. I’ve since purchased the etrailer brand same rating for another trailer and think it’s a much better jack.
by: John12/23/2022
Failed after 1 month. Sometimes it works, sometimes not. Found that when cranked manually - even a fraction of a turn- it would work off the switch, but only once. That, with the fact that it has to have the a 3 screw cover removed to operate it manually, and therefore every time it failed, makes this unit entirely unreliable.
by: Paul 04/24/2023
Easy replacement of the old manual jack. Works great with the pickup outlet.
Better than expected delivery too.
by: Peter Brent05/08/2019
Easy to install worked great first time will update if there any changes but happy so far
by: Frank06/16/2022
Very simple process ~ easy website to navigate ~ great products!
Frank J.
6/17/2023
The trailer jack has been working out great! No problems at all and it’s very convenient!
by: Gary09/04/2021
The problem with this one is the level cap where the emergency crank is has three small screws you need to remove. My other two have a cap that you can remove by hand real fast.If you buy this one keep a small Philips screw driver with the hand crank. Also ALL STICKERS are peeling off do to the coating used on metal. The jack is well make metal parts seem well coated.
by: Fred M02/02/2020
Use it on my enclosed car trailer to load and unload cars with low clearance, Jack works 100% satisfied, I use separate battery that I keep charged in trailer
Fred M.
2/3/2021
Great wish I had purchased years before
by: Michael 06/30/2023
WISH EVERYONE HAD ONE ,WHAT A BACK SAVE R.
by: Anthony 08/23/2023
Installed as said! Works great!
by: Jeremy 06/05/2023
Customer service here is extremely helpful and do their best to get you your items ASAP. Thanks!
by: Lyle 10/17/2020
Shipping was fast and jack works when I plugged it into my pickup. Haven’t mounted it yet but looks like it should fit
Lyle
10/18/2021
It worked when I installed it in late fall when I hooked up to it the spring it wouldn’t work I installed a new switch and still didn’t work.
by: Lloyd 11/12/2020
I have a Cottage trailer that I move onto a lot for the winter in Arizona and put it back into storage for the summer. This jack handles it easily. Etrailer just did a one year follow up on my Jack, so I am more than impressed!
by: Michael P.06/12/2019
Totally awesome. I have a bad right shoulder and it makes it difficult to crank the trailer jack. This power jack was like a 15 minute installation and with the 7 point plug already hooked up it was just too easy. The installation required the removal of the old manual jack and the install of the new power jack which required removing three bolts. This will make the upcoming deer season that much more enjoyable with the easy hookup.
by: Gary M.08/31/2020
This has been a great investment for my camper. I did remove the connector, and wired it into my camper's 12v system to make it easier for me, but I'm very happy with this jack. It works great and saves time and (muscle) energy!
by: Ron06/15/2019
It's such a pleasure not having to crank the trailer off and on the truck, using this product was the best purchase I ever made to make my life easier.
Ronald S.
6/30/2020
For years I have owned trailers and campers that had manual jacks on them. When I bought my 16 trailer last year to carry my work related tools, I just towed around the trailer everywhere because I was too tired from taking it off and on my truck. One day a stranger was watching my struggle with taking the trailer off my truck he asked me why I dont have a motorized jack for the trailer...I never heard of such a thing until I researched it and I will never use a trailer again without an electric jack. Best investment in time saving ever.
by: Lance G.06/06/2019
This jack works great so far! (Day 1) Except for one minor detail, everything works as described. I have a 2014 Ford F-150 with a factory hitch & 7pin plug. My fuse box did not have the 30A fuse & relay needed to power the jack. Found the exact fuse & relay needed in my glove box. Apparently Ford doesn't install them when installing the hitch & 7pin plug. Not all trailers need this power function. Mostly the fuse & relay are used to charge the battery on a travel trailer via the 7pin plug. I'm pulling a cargo trailer with no battery to charge. Once I installed the relay in slot #9 & the 30A fuse in slot #21 in the fuse box under the hood, the jack worked as described.
I do wish the cable was a rubber jacketed cable instead of a split corrugated tubing. I might change that one day. Also wish the manual crank handle was slightly shorter. I have a V-nose trailer, and the manual crank handle hits the V-nose, not allowing for a complete 360 turn. The level on top is nice, but needs to twist off like some models I've seen. This model requires you to have a Phillips screwdriver to remove the level to get to the manual crank, and then try to keep up with the tiny screws. These are just some things I would change to make this product better.
Overall, I'm satisfied. Time will tell how long my satisfaction lasts.
by: Roger L07/05/2019
Love this jack. However there was an issue connecting to my 2017 F250 SuperDuty. There is no constant 12v power to the plug to operate the Jack. I did the whole internet search and reading and dont listen to all the advice about fuses and relays. There are no fuses and or relays that are necessary. Just pull apart the 7way connector to the jack and remove the wire from 1oclock and replace to the 11oclock position and it will work fine. Before you start to look for fuses and relays just know that there is no relay connections for slot 37.
by: Benjamin10/31/2018
This jack is awesome! I have service connected disabilities that affect my arms and this is a lifesaver. It's as easy to install as a regular crank jack, very heavy, and I love the 7-pin plug for power. I installed it on our 3 horse v-nose trailer. I can lift the trailer and pick up the rear end of my 1/2 ton truck with ease.
25
108
Show More Reviews
See what our Experts say about this Buyers Products Camper Jacks
- Replacement Brakes, Trailer Jack, Torsion Lift Kit, and Brake Controller for a 2012 Jayco CamperTo add a lift kit to your 2012 Jayco trailer you should need the Torflex Lift Kit # K71-723-01 designed for a #9 Torflex axle - I don't have the specifics of what came on your trailer even with the provided VIN so you'll have to check on your end to see what torsion axle you have and compare that with what I mentioned above. When it comes to solar panel kits we have a variety to choose from, but you really need to know how much you're needing prior to purchasing a kit. I'm linking some...
view full answer... - How to Charge Battery Bank on R-Pod Using Tow Vehicle and Solar Panel PowerIt looks like you're needing the Redarc BCDC Battery Charger. This comes in a few different sizes but you'll need either the 25 Amp # 331-BCDC1225D or the 40 Amp # 331-BCDC1240D. These will charge the battery bank on your R-Pod via the tow vehicle but they also have a connection for a solar panel setup and will prioritize solar panel over the tow vehicle. They also have a smart charge system so they will read your battery bank and apply the best case scenario to get the battery bank topped...
view full answer... - Availability of 7-Way Extension for Buyers Products 3370093500 Powered Trailer JackExtensions are indeed available. For a 7 foot long extension, use # C56080 or for 10 foot extension use # TLW6510. I've linked you to some product description videos for the extensions I mentioned.
view full answer... - Troubleshooting Wiring of Buyers Products Electric JackThe Buyers Products 12-Volt Electric Jack - 22-1/2" Travel - 3,500 lbs # 3370093500 has a 20 amp circuit breaker and motor switch between the trailer wiring connection and the motor. I recommend checking the circuit breaker and then the switch for continuity using a circuit tester like # PTW2992. I've attached a schematic of your wiring to assist.
view full answer...
- Best Way To Gain Tailgate Clearance With Electric Trailer JackThere are other ways to help gain tailgate clearance, but disassembling the electric jack # 3370093500 is not the solution. I would recommend getting the 180 Hitch 2-Ball Mount w/ Stainless Steel Balls For 2" Hitches # LTB6-2 because it has a 6" Drop, 7" Rise and is rated for 12.5K lbs. This will help you get your tailgate down on your 2016 Ram 1500 so you don't have to worry about denting it.
view full answer... - Wiring Electric Jack to Plug Into 7-Way on Tow Vehicle Although wiring an electric jack like the etrailer.com # EJ-3520-BBX you referenced to a dedicated battery on the trailer is the preferred solution for ensuring you get the needed power, you can indeed wire it to a 7-Way plug like # A7WCB for it to be connected to the 7-Way on your truck when needed. If you don't yet have an electric jack, we actually have a 3,500 pound unit available with the Buyers Products # 3370093500 that is designed to be used this way right out of the box. This...
view full answer... - Socket Size for Manual Override on Buyer's Products Electric Trailer JackThe manual override that comes with the Electric Trailer Jack # 3370093500 is the same as a 1/2" socket so you can use that socket size as an alternative to the override tool.
view full answer... - Can Electric A-Frame Jack be Powered by Tow Vehicle BatteryYou can definitely use the 7-Way on your tow vehicle to power an electric A-Frame jack. We actually carry the Buyers Products 12-Volt Electric Jack # 3370093500 which comes with a 7-Way connector installed so you can do just this very thing without having to splice into the 7-Way on your trailer. We typically say to use a trailer battery just to help prevent draining the start battery in your vehicle to the point where it won't start and you get stranded. As long as you are mindful of...
view full answer... - Can a Breakaway Battery be Used to Power an Electric A-Frame Trailer JackIf your breakaway system is powered by its own battery then it is likely a 5 amp hour battery which is not high enough to power an electric trailer jack, such as # BD500199, since they can draw about 30 amps under load. The other issue is that a breakaway system needs its own dedicated battery and should not be shared by other 12 volt accessories. If your trailer has a 7-Way trailer connector with functioning 12 volt circuit you could use electric jack # 3370093500 which plugs into a 7-Way...
view full answer... - Replacement Foot Pad for Buyers Products 12V Trailer Jack # 3370093500 I do have a solution for you, however the Replacement Foot Pad # 2500-3755G referenced in your question is designed specifically for certain electric jacks made by Stromberg Carlson so I cannot confirm if it will work well for your existing jack. For your 12V Electric Jack # 3370093500 (part 0093500 from Buyers Products) you will need the Replacement Foot Pad # 3373013261. This will work perfectly for your jack and is exactly what the jack would have originally been equipped with.
view full answer... - Mounting Hole Spacing for Buyers Products 12 Volt Electric Jack # 3370093500A-frame trailer jacks including # 3370093500 use an industry standard mounting hole pattern (with very few exceptions). They are approximately 3 inches on center. Some jacks have slotted mounting holes which is why the measurements are approximate (it could be a little more or a little less than 3 inches on center).
view full answer... - Troubleshooting No Power to Buyers Products Electric Trailer JackBecause the Buyers Products Electric Trailer Jack # 3370093500 receives its' power from the vehicle's 7 way, the most likely culprit is the 12v power circuit on your 2013 Chevy Silverado. You'll want to test to make sure you're getting ~12v on the 7 way using a multimeter like the # PT89ZR at the 1 o'clock pin on the truck's trailer plug. I've linked a helpful article we did on 7 way wiring, which includes some diagrams that you might find helpful. If you can let me know what the voltage...
view full answer...
- Troubleshooting Electric Trailer Jack with 7-Way Plug That Does Not Function ConsistentlyAn electric A-frame tongue jack like # EJ-3527-BBX or # 3370093500 that has a pre-wired 7-way plug will rely on the ground and +12V contacts within that plug to deliver operating power. Jacks may not function with less than 12 volts. Those contacts are located, respectively, at the 5:00 and 11:00 positions on the plug as you look at it. Please refer to the linked photo. You might try an aerosol electrical contact cleaner like Caig De-Oxit to see if that restores reliable operation. I agree...
view full answer...
- Are Replacement Parts Available for the Buyers Products 12v Electric 3500-lb Camper Jack?You can replace the leg on the Buyers Products 12v Electric Jack # 3370093500 with the Replacement Footpad for Buyers Products 12v Electric Jacks # 3373013261 .
view full answer... - How To Lubricate The Buyers Products Electric Trailer Jack # 3370093500I've attached a copy of the manual for the Buyer's Products Electric Trailer Jack # 3370093500 below. It has a small section that lists how to lubricate the jack with some white lithium grease # L11354.
view full answer...
- How to Connect Buyers Products 12-Volt Electric Jack # 3370093500 to Travel Trailer BatteryIf you are wanting to draw power off of the battery on your travel trailer for your Buyers Products 12-Volt Electric Jack # 3370093500 then you need to install a vehicle-side 7-Way connector like the Hopkins # HM48480 on your trailer and run some wiring. The wiring you need to run is for the power and ground functions. Simply run some 10 Gauge Wire # 10-2-1 from the power and ground pins on your 7-Way (see attached photo) and the connect the power wire to your positive battery post (with...
view full answer...
- What Size Jack Hole Does the Electric Jack w/ Footplate FitThe outer tube diameter of the Electric Jack w/ Footplate part # 3370093500 is 2-1/4" as with practically every electric jack so if you only have a 2" you will need enlarge the jack hole in order to upgrade to electric. The best way to do this would be with a hole saw but I will be the first to admit this will be difficult if you can't find a way to secure the pilot bit. If you can wedge some wood underneath that would be easiest.
view full answer... - Can 7-Way of Electric Trailer Jack be Cut Off and the Wiring Run to Trailer BatteryIf your electric trailer jack has a 7-Way built-into it for power, like the Buyers Products # 3370093500, then it is completely acceptable for you to cut off the 7-Way and run the power to the positive terminal on your 12V battery. Instead of running your ground to the negative terminal on your battery though I highly recommend grounding it to the frame on your trailer. This will be a much better ground option that running it to the battery. You do want to check and make sure that your...
view full answer...
- Will the Electric Trailer Jack - Drop Leg Work On a 3,300 Lb TrailerThe Electric Trailer Jack - Drop Leg part # 3370093500 has a 3,500 lb weight capacity which means it would be capable of lifting a trailer with tongue weight up to 3,500 lbs. The gross weight of the trailer is not the main factor, it is the tongue weight therefore the jack would be more than enough for a trailer weighing 3,300 lbs or more.
view full answer... - Recommended Electric Trailer Tongue Jack for Fleetwood Sedona Pop-UpYes, I don't see any reason you could not install an electric trailer tongue jack on a Fleetwood Sedona. For this, I recommend the Electric Trailer Jack part # 3370093500. This jack simply plugs into the vehicle for power, it has an integrated LED, and an emergency crank handle.It will be a direct bolt-on swap.
view full answer... - Electric Trailer Jack Replacement Recommendation for Tandem Axle Boat TrailerI recommend going with the Electric Jack w/ Footplate # EJ-3520-BBX for your 1996 TrailRite because it is a solid choice that meets your specs at a good price. This installs on your A-Frame and is powered by splicing into battery power whether that's directly from a battery on your trailer or if you'll have it pulling power from the 7-Way on your tow vehicle. If you don't have a battery on your trailer or even a 7-Way installed on it either then you might be interested in the Electric...
view full answer... - Does Buyers Products Powered Jack Fit Under Lippert Jack It Bike RackYes the Buyers Products 12-Volt Electric Jack - 22-1/2 Travel - 3,500 lbs jack # 3370093500 that you referenced would fit under your Jack-It # LC429756.
view full answer... - No Power on Buyers Products 3370093500 Trailer Jack When Plugged into 7-way on 2002 Ford F250I'm sorry to hear that you're having difficulty with your # 3370093500 trailer jack. If you're not getting 12V on the pin in the 1:00 position in the 7-way trailer connector, I'd suspect a blown or missing fuse. The 20A fuse that protects this circuit is in location 115 in the fuse panel located behind the panel just under the steering column. The panel is held in place by 4 fasteners, turn them counter clockwise that he panel can be removed. If the fuse was blown, you'll want to figure...
view full answer... - What Size Battery Should be Used to Power Bulldog Electric A-Frame Trailer JacksA standard car battery will work to power Bulldog trailer jack # BD500199. The battery will need to have an amp hour rating greater than 30 amps which is the max current draw of most electric A-frame jacks. Other option is to use jack # 3370093500 or # UF38-944037 provided your tow vehicle has a 7-Way trailer connector with functioning 12 volt circuit. Both of these jacks are powered through the 7-Way so no battery is required on the trailer to run the jack. I have linked videos for all...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Installed by:
Cole B
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Mark S
Video by:
Zach D
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Peter F.
5/9/2020
works good, but i do not like the idea of having to unscrew top to use manual crank , if i am right it was suppose to be a slide to side action