Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
(685 reviews)
Price: $437.56
In Stock
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
Item # FOS43TASF
Retail:$575.95
Our Price: $437.56
You Save: $138.39
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (685)
- Q & A (0)
- Photos
Furrion RV Camera System - FOS43TASF
- Backup Camera
- Observation Camera
- 4.3 Inch Display
- Furrion
- Wireless Signal
- Built-In Microphone
- Touch Screen
- Anti-Glare
- Mirrored Image
- Night Vision
- Motion Detecting
- Waterproof
- 1 Camera
- Dashboard Mounting Bracket
- Suction Cup Mount
- Below Rear Clearance
- 120 Degrees
The camera system's monitor screen reduces glare when you're driving to the campsite on a bright, sunny day. Motion sensor automatically powers the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.
Features:
- Wireless backup camera system improves rear-view visibility for your RV or camper
- Minimizes blind spots and helps prevent accidents
- Included CMOS camera creates clear digital video in full color
- 120-Degree viewing angle gives you optimum visibility
- Integrated motion sensors trigger the monitor to turn on
- Integrated IR cut filter blocks out infrared light during the day to capture natural-looking images
- 8 Infrared LEDs surround the camera lens to provide nighttime vision up to 16'
- 4.3" Full-color LCD touch screen monitor has color-coded, rear assist marker lines that show distance from other objects
- Auto-dimming, anti-glare screen is easy to see in any lighting condition
- Brightness, color, contrast, and image orientation can be easily adjusted
- Auto-off setting powers down the monitor after 10, 20, or 30 seconds
- Integrated microphone and speaker make it easy to get help backing up
- Microphone on camera picks up your friend's voice outside the RV
- Speakers on monitor let you clearly hear your friend's instructions
- Built-in digital transmitter offers high-quality, uninterrupted video up to 492' away
- Eliminates interference from smartphones, routers, and other devices
- Durable metal housing is waterproof and dust resistant
- IP65-rated to protect against dust and low-pressure water jet sprays
- Simple installation - minimal drilling required
- Monitor suction cups to your windshield
- Camera mounts to the rear of your RV or camper
- 1 Camera, monitor, 1 monitor mount, 12V DC power cord, 6' camera power cable, antennas, zip ties, and mounting screws are included
Specs:
- Monitor dimensions: 4-3/4" wide x 3-1/8" tall x 1" deep
- Screen size: 4-5/16"
- Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
- Mounting hole spacing (center to center):
- Horizontally: 3-3/4"
- Vertically: 15/16"
- Mounting hole spacing (center to center):
- Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
- Resolution:
- Monitor: 480 x 272
- Camera: 720 x 480
- Wireless range: 492'
- Voltage: 12V - 24V DC
- Camera cable length: 6'
- 1-Year warranty
Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.
After a long drive to the campground, the last thing you feel like doing is maneuvering your RV into a tight campsite space - especially in the dark! This wireless backup camera system gives you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.
Monitor the Rear of Your RV
If you're set up at the campsite for the weekend, the motion sensor will automatically power the touchscreen monitor on if they sense movement in the form of a prowling animal or person.
Easily Communicate from Outside Your RV
Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.
Avoid Collisions While Backing Up
No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.
And because this camera has 8 infrared LEDs, you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 16' should you arrive at the campsite after dark and need to back up into your parking spot. And during the day, the integrated IR cut filter blocks out the infrared light during the day so you'll still be able to have crips, natural-looking images.
Withstand Multiple Climates and Environments
If it's raining out, or if you just simply need to wash your RV, the waterproof, IP65-rated camera will be protected against low-pressure water jet sprays. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.
Installs Onto Your Windshield and RV Rear
This camera system includes a suction cup mount that you can use to stick the monitor onto your dashboard or windshield. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.
Because this system is wireless, installation is much easier than it would be with a wired system, as you'll only need to do minimal drilling and wiring. Just bolt the camera down with the included mounting screws and connect to your RV's reverse lights. Be sure that the camera won't interfere with any slide outs or other moving components. If you intend to use this system only for backing up, wire the camera to the reverse lights. If you prefer to use it to keep an eye on your rig on the highway, wire the camera to the running lights.
729125 Furrion Vision S Wireless RV Backup Camera System for RVs - Night Vision - 4.3" Screen
Replaces FOS48TAPK-BL
Replaces 729125
Alt 405211ET
Alt 110423
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen - FOS43TASF
Average Customer Rating: 4.7 out of 5 stars (685 Customer Reviews)
The camera system's monitor screen reduces glare when you're driving to the campsite on a bright, sunny day. Motion sensor automatically powers the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.by: Robert 07/02/2023
Good system. Only issue is my 2022 Silverado 2500, needed an additional power plug to use. When purchased through etrailer I always receive an error about my trailer light. No issues with lights. Additional REQUIRED power adapter has an issue.
by: Niel07/28/2023
Installation took 10 minutes, literally. already paired and my trailer had the mount installed. turn on parking lights and everything worked. Aiming camera took one minute. Now I can see who is behind me while driving.
Backing into a campsite just got way easier as well.
by: Randy S10/13/2017
Camera works as advertised. Wired camera into running lights 5th wheel. Took about 45 min to layout, drill, pull wire, caulk, and mount.
I did install 3mm Diameter Snap on Ferrite Core Bead Choke Ring Cord RFI EMI Noise Suppressor Filter for USB / Audio / Video Cable Power Cord on both camera and receiver.
Receiver took about 20 min to install. I routed wires nicely, add choke rings.
I have 4 bars running 60 mph. Great purchase and very pleased.
by: Loren 06/29/2023
Super easy installation on a camper that already had the underlying Furrion power supply wire. Great quality picture and audio. Highly recommend this for the price!
by: Dale 08/14/2023
It's a good product. The camera lights are non-glare light blue, but they really show everything very well in the dark. Our trailer is 23ft. and the signal gets to the truck dash board from the back of the trailer quite well.
by: Randy 10/15/2021
I love this camera! It is so much better than I originally thought it would be. I use it for my rearview mirror when traveling, I can see who is behind my Camper and I don't have to use the add on mirrors on my tow vehicle anymore because I can see now with the backup camera in the rear blind spot and the rest with my tow vehicles mirrors. I also can now back my travel trailer into the campsites without my wifes help and do that with only one try. It has been such a nice experience using this camera system.
Randy
10/15/2022
I still love it! It is still awesome, I would not want to go camping without it. It has made my camping experience so much more pleasurable. If you don’t have one of these I highly recommend you get one .
by: Rick04/10/2019
We purchased the Furrion FOS43TASF to use as an observation camera while towing our new 2018 26' Jayco Jay Flight travel trailer. Our Jayco came equipped with a pre-wired mount for the Furrion camera. The pre-wired black female cord for the camera was present but someone at the factory forgot to wire it to power, so when I plugged in the camera, there was no juice... I removed the center clearance light on the back of the trailer, used the supplied power cord and to feed in/splice in from the clearance light. Installation only took about 15 minutes. We already made our first trip this season and the camera worked wonderful. Great picture, no delays, very happy being able to see what's in the back and coming along the sides. We didn't use the monitor mount supplied with the Furrion, instead we used a vent phone mount I had for my phone that worked perfectly. This is our second and the best observation camera for towing a trailer we've experienced. The first one was another brand on different travel trailer we just sold. Our experience with that camera was poor picture quality, delays and blackouts. We definitely would recommend the Furrion FOS43TASF.
by: GT01/04/2019
We received our Furrion Observation Camera, FOS43TASF, quickly as advertised. Our camera arrived with no damage. Installation was fast and easy on our 2018, Grand Design, Imagine, 2600RB, plug and play with the existing mount. It took maybe 20 - 30 minutes at the most to install, pair and make minor adjustments. The camera and viewer paired immediately when power was turned on. The camera turned on when the trailer parking lights were turned on. Positioned the camera so the spare tire could be seen on the observation screen to give a point of reference to the back of the camper. Received a strong signal on the pairing. We haven't driven the camper on the road yet to give a review on the workings of the the unit but, don't expect any problems. Should be a good safety feature to know what is behind us when towing. Very happy with our purchase and would recommend this product. This product from etrailer was the least expensive price I could find while researching price points. Thank you etrailer.
by: Harry r.05/15/2018
This rear observation system was exactly what I needed to give me some eyes in the back of my towable trailer. The system communicates with a 4 bars of strength using a wireless signal between the camera, located at the back of my 24 foot long (2401RG Minnie Winnebago) trailer, and the monitor mounted in the cab of my Ford F150 XLT.
The installation was easy and only took about an hour at most.
I located the two wires feeding the center clearance light near the top of the trailer and through a new drilled hole just below the light I was able to feed in/splice in, the camera wires to get the power the camera needed. (Tip. Before this I used a pair of 6V batteries in series to get temporary power to the camera to ensure good signal back to the monitor in the truck and that a good rear view was possible from the intended mounting spot). Now I can see from the trailer's back bumper to about 35 feet behind on the road.
As usual the Etrailer team was helpful and the order arrived quickly and correctly.
Great Job Julie H. for the last minute assist to correct my order.
by: John H01/05/2023
The RV back up camera work great once I got it hook up. But at the RV dealer and manufactory said was pre wire and had a cover with plug and play. Yell right I tried plug and play but was not the case the plug was there but had to hard wire in and do everything to splice the cable in to get to work. Just Lazy manufactory's this day and time. I'm sure the dealer assume it was wire in. I Have a new 2022 Cameo by Cross Roads that builds Red Woods I hate to know I pay $180,000.00 heck my RV was listed for $118,000.00. But over all the Furrion Vision S Wireless RV Backup Camera System works Great. Just be aware of the Lazy manufactory's anymore. I didn't take any pictures didn't have time after 15 min's turned in to 2 hours.
by: Richard05/26/2018
I needed a way to see my Indian motorcycle on a trailer behind my 40’ fifth wheel. I had Fords system when I bought my new truck, but there was much more wiring than I wanted to tackle and I was hoping for a non wired system. I bought this with my fingers crossed. Very easy installation of less than an hour and the results were what I wanted
by: Rod V09/07/2018
Super easy install if your unit is already equipped with the mounting bracket from the factory. The only thing I was not impressed with was the monitor mount. Quite restrictive if your dash is a grained texture you are pretty much restricted to mounting on the windshield which I found a bit annoying. I happened to have a CD slot mount, and we never use the CD player so I tried it. Couldn’t have found a better location!!
by: Mark 11/29/2022
The camera was easy to install. I just removed the preinstalled camera mount cover that came with the trailer. The window suction in the truck works great. I love how I can now see behind me when travelling. Also seeing what's behind me when backing up. I would recommend this camera. It is a wonderful asset.
by: Jeff M04/23/2020
I like it a lot I double a travel trailer and a atv trailer it helps me keep a eye on the trailer behind the camper and is great for changing lanes. The only thing I would do different is get the bigger monitor.
Thanks
by: Joe05/31/2021
My 2019 Keystone cougar was pre-wired for his camera. It made installing it very simple. I’ve used it for a year now and for the most part it has worked to my expectations. The only problem I am having is it cuts in and out briefly as I’m driving down the road. This does not cause any real problems and I’m not sure what is causing it. It’s either that distance is too far or had a loose connection I haven’t tracked it down yet. But I would recommend buying the system.
Heather A.
6/2/2021
Thank you for your review. It does sound like the connection may be loose. I recommend to remove the camera from the shark fin mount and make sure the wire connections are fully seated with one another.
Joe
6/13/2022
Camera is still working well. It’s definitely a benefit to be able to keep track of traffic that is close behind me.
by: August 06/09/2023
Above average camera. The in camera guide lines are accurate and greatly assist in backing up, especially in tight spaces.
by: Terry s Travel Trailer06/07/2022
We have really enjoyed the backup camera. It would have been nice if the directions had included that we needed to turn on our headlights to run it! But, now that we know it works really well!
Sierra K.
6/10/2022
This gets wired to the running lights circuit, which means the camera will only be fully powered when you have the running lights turned on in your vehicle. Make sure you are not relying on the auto lights feature in the truck.
by: Ruidoso01/05/2022
If you own a 22 1/2' trailer and a SUV for towing you will find the range of the signal at its max with communication between camera and receiver. Meaning many times the signal is lost or there is a delay in the image. A vehicle will already be at your driver's side door when it shows up at your bumper on the screen. The view is VERY bubbled. Other than that LOVE LOVE LOVE it! Very helpful when it comes to backing up and hearing the individual assisting with instructions. No yelling needed and no disturbing your neighbors when parking.
Jenny N.
1/6/2022
I recommend adding part # WVOSAPANTEXT to help boost the signal of the camera.
Helpful Links
by: Brian 04/07/2023
This camera has been great. I can keep an eye on our bikes that are on the back of our camper. I like that I can see how close drivers are behind me and I can see when I've cleared a vehicle that I just passed.
by: Robert04/21/2019
Everything I needed to add to my trailer. Even though the trailer came already prepped for the Furrion equipment, everything I would have needed was there. I had to find out how my travel trailer was pre-wired to feed power to the camera. My trailer was wired to the lights circuit, but did not connect with the automatic light setting, I had to switch on the lights. Can't wait to try it out on my next trip and return parking. Crossing my fingers.
Robert
4/22/2020
After 1st year it is great. I have a hard turn to back into my yard from a busy street. Able to get it done in normally 1 try. Thumbs up.
by: Gregory 06/06/2023
Maybe a 10 minute install, RV was pre wired of course. Good view out the back of the RV.
by: Ted 06/08/2023
Works great.
by: Roger G.03/17/2018
Installed it on my new fifth wheel on the same day I got it. It paired up fast and has a great easy to see monitor. The only thing I need to look at is the power wire that was run from the trailer factory. The power comes on from the battery switch. I need to find away to turn it off when not use. If no switch, I need to put one in. Don’t need that draw on the batteries when not in use.
Roger G.
3/18/2019
It’s a great product and has already saved me several hundreds of dollars by catching problems with my second trailer just behind my fifth wheel.
by: Edwin 08/14/2022
The camera is useful and has served it's purpose very well. We're very glad to have it. It's great for my wife to be able to stand behind our 35' trailer and talk to me as I back it in. The only con is that the screen is difficult to see when driving if the sun is really bright. Overall, I consider it money well spent and would definitely buy again. Highly recommend!
by: Bradb02/26/2020
I have the camera on the back of a travel trailer. Having a view of the road behind the trailer is indispensible and I am amazed that they are not legally required. I can also see my bikes on the back rack. The only reason I downgrade it one star is because the suction cup for the monitor in the truck often falls off the windshield.
Bradb
2/27/2021
Good camera. I gave up on the suction cup and prop the monitor up on the console, which is not ideal. It is almost impossible to see with sunglasses on.
25
685
Show More Reviews
See what our Experts say about this Furrion RV Camera System
- Furrion FOS43TASF Camera Wont Power On Camper After Install and PairingThe camera will need to have the running lights circuit on your trailer activated by the tow vehicle to be able to power on since that's what circuit is carried on the pre-wiring of your trailer. If that's on make sure the camera didn't somehow get disconnected from the base.
view full answer...
- Could 2018 Coleman 1605FB Have Been Sold with Furrion Observation Camera System InstalledIt would have been an add on option at the dealer when the 2018 Coleman 1605FB was bought as that's how the Furrion kits come pre-installed. You can order them with just the pre-wiring, with the camera kit installed which includes the monitor, or without all of it altogether. Contacting the dealer you bought the RV from would be best way to track down paperwork that states it was sold with it.
view full answer... - Can RV Backup Camera System Be Used as an Observation System Yes, a backup camera system like the Furrion Vision S # FOS43TASF that you were looking at can absolutely be used as an observation system. It is just a matter of connecting the power wire to the appropriate source. If you want to re-wire your dad's camera for use as an observation system you will just need to disconnect it from the RV's reverse light circuit wire and connect it instead to one that has more constant power such as the running lights circuit. I have attached a short video...
view full answer... - Will the Furrion Vision S Backup Camera System FOS43TASF Use Same Bracket as Old Furrion CameraThe Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF will use the same mounting bracket and wiring connector as the old Furrion Vision Wireless RV Backup Camera System FOS48TAPK-BL so it will be a direct plug-in-play replacement. There will be no additional drilling or wiring required.
view full answer... - Furrion Backup Camera for 2019 Coleman Lantern 202RDThe Furrion Vision S Wireless RV Backup Camera # FOS43TASF is a great option for your 2019 Coleman Lantern 202RD. The camera can be mounted to the back of your camper and wired to your trailer reverse lights for use as a back-up camera. This provides power to the camera and turns the camera on when backing up. The camera uses wireless technology to transmit the camera feed to the monitor in the tow vehicle. The monitor plugs into the cigarette lighter plug for power. Check out the video...
view full answer... - Wireless Camera Observation System Recommendation for Toy Hauler with Great ReceptionSome camera setups are more prone to interference than others when installed at the back of a toy hauler. We've found that the reception for the Furrion Observation Systems like the part # FOS43TASF you referenced is really great. The range on these is up to 492 feet which is easily more than needed for a toy hauler setup like what you have. We've also not had any customers come back and report to us with any interference or reception issues so this is the setup we recommend the highest.
view full answer... - Correct Backup Camera for 2020 Keystone Premier Travel Trailer With FRCBRKT-BL MountYes, the Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF is a direct fit for a 2020 Keystone Premier Travel Trailer with Furrion Mounting Bracket FRCBRKT-BL.
view full answer... - Which Circuit of 2018 Jayco Seismic Powers the Observation Camera SetupAre the running lights working on the trailer currently? That's the circuit that activates the camera so that would be the first thing to check. If that circuit is working but you are not getting power to the camera still the issue would be the connection between that circuit and the power wire of the camera. I'd be shocked if this would take 5 hours to get to the bottom of...
view full answer... - Troubleshooting Furrion Vision S that Says Not Paired but Still Shows Camera ViewThat's pretty odd for the monitor to say it's not paired but then have it still show the camera on the display screen. I'd first try holding down the Pair button on the bottom of the camera for a few seconds to see if that fixes it but if that does not work I would try resetting the monitor. If it's still showing that error message it's probably worth looking into having it warrantied.
view full answer... - Which RV Observation System has Best Reception and ReliabilitySorry to hear about all of the issues you've had with the past camera kits you've tried. The Furrion Vision S systems like the part # FOS43TASF that you referenced will be your best option and will give you a reliable camera setup. Of all of the observation systems out there this by far has the best reception and reliability so I recommend it highly for your setup.
view full answer... - Does Furrion FOS43TASF Vision S Camera System Need To Be Installed So Antenna Extends Above RoofAccording to the folks at Furrion, ideally you do indeed want to install a wireless camera system like the # FOS43TASF Vision S so that the antenna extends above the RV roof by a bit otherwise the RV will interfere with the transmission of the wireless signal from the camera to the monitor. The system has an unobstructed range of 492 feet but that is greatly diminished if that range is obstructed. If your Keystone Bullet is prewired, the blank for the camera will be located pretty high...
view full answer... - Troubleshooting Furrion Camera That Shuts Off When Truck's Ignition is Turned On Typically the pre-wired Furrion brackets on new trailers are wired to the running lights circuit, which means the camera for the Furrion Observation System # FOS43TASF will only be fully powered when you have the running lights turned on in your Ford F-150. Since it's the easiest potential fix, I definitely recommend starting by simply turning the headlights on in the truck (with the ignition also on) to see if this powers up everything for normal operation. As you alluded to in your question,...
view full answer... - Why Would Furrion Vision S Observation System for RV Stop Working When Vehicle is Put in RerverseSounds like you might have auto running lights on your truck which is then activating the running lights on your trailer and then turning on the camera of the # FOS43TASF that you have. Have you tried turning on the running lights or headlights of the truck when it's in reverse to see if that keeps the camera activated.
view full answer... - Weak/Intermittent Signal Error With Furrion Vision S Wireless RV Backup Camera SystemI took a look at the instruction manual for the Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF which is attached below as well and there are a few possible causes of the weak/intermittent signal issues you are experiencing. I have listed these causes for you below as outlined in the manual. - Check if the camera antenna is fitted and secured correctly - it should be vertical. - Distance between camera and monitor is too great. Reduce distance between Camera and Monitor. -...
view full answer... - Are the Furrion Vision S Wireless RV Backup Camera System # FOS43TASF and FOS48TABL CompatibleI spoke to my contact at Furrion and he said that FOS48TABL is compatible with the Furrion Vision S Wireless RV Backup Camera System # FOS43TASF but you will have to take it to a dealer or electronics specialist to have it wired in, One thing to keep in mind is the FOS48TABL is a discontinued model and no longer available. I wasn't able to find much information on the FOS48TABL, the biggest difference in the two I found is the FOS43TASF had a larger wireless range.
view full answer... - How to Adjust the Brightness on the Monitor for a Furrion Wireless Backup Camera SystemTo adjust the screen brightness of the monitor that comes with the Furrion Vision S Wireless RV Backup Camera System # FOS43TASF you will use the up and down buttons on the right side of the monitor until you find the picture setting. You will then hit the confirm button and once there use the up and down arrows to navigate to brightness. I have also attached a couple pictures to help you know what your looking for.
view full answer...
- Furrion FOS48TAPK-BL Monitor Wont Turn OnI do have an option for you but there would be no more troubleshooting steps for you as the monitor is no longer operable and will need to be replaced. I suspect that one of the solder contacts on the circuit board has failed so unless you are experienced with soldering circuit boards assuming that is in fact the issue then you will need to replace the system. The system will need to be replaced as the old style monitors are no longer available as they have been made discontinued by the...
view full answer... - Recommended Best Wireless Backup Camera System for 2017 Jayco TrailerOn your 2017 Jayco 28BDSH trailer, the Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 4.3" Screen # FOS43TASF is the option that has the best reception. This camera actually comes as a factory option on many trailers now due to it's clear function and customer reviews. We have had very positive customer feedback on the Furrion system and its ease of installation as well as function. This system uses a digital transmission so it will bring a clearer picture much...
view full answer... - 2020 Forest River Cherokee Arctic Wolf Fifth Wheel Camera RecommendationWe currently do not carry any cameras that would link into the "Invisible Trailer" feature to be able to use your dash monitor. You would need to go through GM to get a camera that would link up and it would most likely have to be hard wired from the camera to the dash. The Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF has a wireless connection from the camera to the monitor. It's a very easy setup and most newer 5th wheels are...
view full answer... - Furrion Camera Kit Recommendation that Can Fit Bracket with Part # FOS48TA-BLThe Furrion part number you mentioned is for a camera that Furrion stopped making but what you can use is the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF that you referenced instead as it will bolt right up to the same mounting bracket. This is the replacement for the kit part number you mentioned already. This kit also includes a mounting bracket as well but you would simply not need to use it. I attached an install video link to this page for the camera...
view full answer... - Is Screen Brightness of Furrion Vision S Observation System AdjustableThe only screen adjustment you can make with the Furrion Vision S systems like part # FOS43TASF is in the settings menu like you mentioned. You might try a different location for the monitor like further away from the windshield where the outside brightness would be tough to compete with.
view full answer... - How To Stop Your Furrion Camera Monitor From Switching Out Of Tri-View ModeIf you have your "Auto Display" function turned on in the settings of your Furrion Vision S Wireless RV Backup Camera # FOS43TASF then it will keep switching the view from Tri-Camera View. You can turn this off by completing the following steps: 1. Select Setup 2. Select Auto Display 3. Switch Auto Display to off Once this is complete it will stop backing out of Tri-View.
view full answer... - Monitor of Furrion FOS43TASF Vision S Camera System Isn't Powering UpUsually when this occurs, it's because the fuse in the 12-v plug that plugs into the cigarette lighter has blown. Carefully unscrew the metal tip of the plug, there's a spring in there so be sure to contain it or it'll fly across the room. The fuse will have the rating stamped on one of it's metal ends, you can easily get a replacement from your local auto parts store.
view full answer... - Recommended Backup Camera For A Bumper Pull Horse TrailerThe Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF you were looking at would be a perfect backup camera for your horse trailer. This wireless backup camera system has a waterproof camera with night vision and IR cut filter that blocks infrared light in the daylight. The touch screen, anti-glare monitor easily mounts to your dashboard and 120-Degree viewing angle and motion detector help prevent accidents. You can also tie the camera...
view full answer...
Do you have a question about this RV Camera System?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Joshua S
Video Edited:
Jacob T
Installed by:
Kathleen M
Installed by:
Cole B
Video by:
Dustin K
Video by:
Jonathan Y
Video by:
Michael B
Video by:
Thomas T
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Adam Y
Updated by:
Noah M
Edited by:
Amanda M
Test Fit:
Shane H
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Kevin C
Written by:
Halie H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Randy S.
10/13/2018
Camera and receivers still working great. Only issue is antenna broke on camera. Purchased aftermarket router antenna 18”. Still have 4 bars.